The Grow Awards 2026 🏆
Likes
Comments
Share
@Ryder
Follow
Day 57, very happy so far, plants are just taking everything they get, a very easy strain to grow. Added Bud Explosion this week as flower has kicked in, really looking forward to the next month as temps drop in my part of the world. Thinking of letting temps be a little cooler in grow area as they seem to enjoy it. Thanks to those who comment I enjoy hearing from other fellow growers, learning new things and becoming better at growing this magnificent plant. Happy growing ✌️
Likes
24
Share
Cette semaine je suis passé en floraison a partir de 25 jours. Une de mes plantes est énorme, une autre minuscule. Meme si cela semble tôt, j'essaye. J'ai ététer les plus grandes et commencé a les faire plier.
Likes
16
Share
@DrLaggis
Follow
Day 72: The Finale 🌿🌟 It’s finally time. My very first grow is coming to an end—at least the cultivation phase. The plant is now ready for harvest, and I can’t believe how incredible this journey has been. I never expected to enjoy the whole process so much—from nurturing the plants to watching them grow and evolve. I’m absolutely hooked and can’t wait to dive into the next steps: harvesting, drying, curing, and of course, starting a new grow soon with fresh ideas and experiments! While it may not be the largest yield, the quality of the buds speaks for itself. The time, love, and care I’ve put into this grow is visible, and I’m pretty proud of the results. I’ll admit, I was a bit impatient at times (which I think every first-timer can relate to 😅), but the experience was priceless. Here are a few interesting highlights from my trimming and harvest process: 1️⃣ Dark Phase Before Harvest Two days before harvest, I put the plant in complete darkness to encourage resin production. I'm not sure if it really made a difference, but it was worth trying! 2️⃣ Wet Trim vs. Dry Trim I decided to go for a wet trim because the buds were really dense, and I wanted to avoid any risk of mold. I’ve read that wet trimming can speed up drying and may slightly impact the quality, but this is part of the learning experience. Next time, I’ll try a dry trim for comparison! 3️⃣ Yield Update Wet, the total came in at 179 grams from my plant. Trimming took around three hours, and it was actually a lot of fun, despite the time commitment. 4️⃣ Curing Plan The buds are now hanging in the tent for about 8 days. Once dried, they’ll go into jars with Boveda Packs (62% humidity) for another 3 weeks of curing. I'll update the smoke report once they’re fully cured, but I’ve already had a sample of the same strain from a friend, and I can say it’s pretty amazing. Final Thoughts on My Grow 🌱✨ As mentioned earlier, this grow has been an absolutely incredible experience, and it has definitely set me on a path to jump right into my next grow. There were ups and downs along the way, such as over-pruning, which I believe stressed the plants a bit. Additionally, I think they could have benefited from an extra week to mature. We also faced many temperature fluctuations this summer, which impacted the plants due to external weather conditions. I'm really pleased with the quality of the buds. The quantity is okay—I can’t fully gauge it yet—but I’m sure there’s more potential to unlock. I've gained valuable experience in what worked well and what didn’t. Overall, the countless lessons learned during this grow far outweigh the few mistakes made. I'm incredibly proud of my first results! As this long journey comes to an end, I want to thank everyone who followed along. I hope you enjoyed all the content. In that spirit, happy growing, and see you next time! 🌟
Processing
Likes
10
Share
@Claxdiok
Follow
Hola esta semana fue muy rápida las plantas pegaron un estirón demasiado violento y crecieron en demacía, espero que no se espiguen porque todo ha salido super bien, uso sustrato cannabiogen en otras plantas y en estas como resultado el sustrato canna me provoca gigantismo, hace que mis hojas crezcan de manera extrema, nos vemos la próxima semana
Likes
4
Share
@KaliWeeD
Follow
Ya vamos viendo bonitas flores 🌼
Processing
Likes
5
Share
@Zulu77
Follow
Lots of bud sights, starting to smell strong now, plants healthy and drinking plenty,
Processing
Likes
6
Share
Some nuts deficiency but fixed right away Snaped while training But she is a survivor
Likes
36
Share
@codebase
Follow
Finally all got rid of their little hats and are looking healthy. TD 3(drooping cotyledon) needed a bit of help so I removed the seed shell with tweezers. Note: The Mycotrex is listed as nutrient because it resides around the shell and than again 10cm below it. 2020-11-12: 1l nutrient solution with 0.5ml of Bia Canna Vega since the soil is Light Mix without any nutrition. I also lowered the light since they were stretching a bit. Light at 25% intensity. 2020-11-14: 300ml ph adjusted water each 2020-11-15: Raised light intensity to 50% 2020-11-17: 300ml ph adjusted water each TD1: 7cm TD2: 5.5cm TD3: 7cm
Likes
24
Share
Hi guys!!! we're doing pretty well now the buds swell day by day ... i am giving fertilizer once a week specifically this week in 1 L of water I put: co2 ¼ of tablet enzymes 1.5 ml candy 3 ml top bud 1 ml cal mag 0.5 ml i am keeping a ph of 6.3 / 6.5 are you curious to try the LEDs but you don't have enough information? I found the ideal solution with this VIPARSPECTRA XS2000 lamp. this well-known brand offers different solutions look at the official website https://viparspectra.eu/ or Search for it on Amazon: Amazon US: https://amzn.to/30xSTVq Amazon Canada: https://amzn.to/38udUVe Viparspectra UE: bit.ly/ViparspectraUE Viparspectra USA: bit.ly/ViparspectraUS keep following me 😝 if you like my work leave a like and/or comment 👍 maryjane23 👻
Likes
52
Share
@WhiteEdge
Follow
26.03.2024 Continue into week 4 Update firmware on TrolMaster Tent-X (3.6) Replace all filters, remove and clean drain buckets and tubing. Mix new batch with 56ml AN connoisseur AB + 4.5g Big Bud Powder + 7.5ml Silica - total 30l @ 1.34EC. NPK Ratio is 1-2-3 , Cal/Mg ratio is 4-1.5 Target EC for this week is 1.2 start and end week with 1.3. Checking plants will determine timing of strength Donne one pass off long misting (3min) with diluted solution @ 0.84@C Finally have time for managing canopy, pull down taller branches and position all tops to fit under screen without touching. Try to spread them evenly across the net, top per square of net Defoliating all girls, remove all fan leaves and prune lots of smaller branches from middle. Lot of foliage is removed! After stripping humidity drop significantly (41%) , need to install humidifier again to keep RH @ 50-52% Set dehumidifier thermostat to work @ 50% RH. Reduced light intensity for this day, let girls recover from stress PAR map 850max/650min PPFD, VPD -1.2-1.3, DRH 50-54%, NRH 45-49%, NT-20-21c, DT-24/25.5c, Leaf temperature 22-23c, Light distance 45-55cm, CO2 700+ppm HLG Scorpion Diablo @ 65-75% - 45-55cm distance 60s ON time 20min OFF time @ Day Time 60s Off time 30min OFF time @ Night Time NT-Nutrient Tank - PH -5.90-, EC -1.32, Temp-20-21 27-28.03.2024 All girl looking great after defoliation,) Clean benches and floor in box Replace all filters Set dehumidifier thermostat to work @ 47% during night times, 50% @ day. Humidifier is also connected and set @ 49% Day and 45% @ night, if needed Inkbird humidity controller stop executing's automation for day/night settings. Start manually to change day/night values for now Next several days, until weekend, temperatures outside will be high , 29c max. Hope it will not raise temperature in box to much. Light is set on TrolMaster TCS-1 controller to dimmed at 28c AC Infinity fans are set to AUTO mode with height temp set at 26c and high RH set at 54% Top up tank with 25ml AN connoisseur AB + 4.5g Big Bud Powder + 7.5ml Silica - total 75l @ 1.34EC PAR map 980max/650min PPFD, VPD -1.2-1.3, DRH 50-52%, NRH 45-48%, NT-21-22c, DT-24/25.5c, Leaf temperature 22-23c, Light distance 45-55cm, CO2 700+ppm HLG Scorpion Diablo @ 80% - 45-55cm distance 60s ON time 20min OFF time @ Day Time 60s Off time 30min OFF time @ Night Time NT-Nutrient Tank - PH -5.90-, EC -1.32, Temp-21-22 29-30.03.2024 Refilled the tanks with 20l of fresh mixture. 25ml AN connoisseur A+B + 3g Big Bud Powder + 7.5ml Silica - total 20l @ 1.21EC Refilling is done in two passes, one time before light up, and second time early in morning, two houres before night time. This give additional nutrient cooling without running water chillier. Refill soulution is @ 18c Checking EC and PH 2-3 times a day. The electroconductivity values are around 1.24EC. I maintain the strength until it drops or rises. For now, I’ve caught the perfect strength, the liquid is almost static with very small oscillations in electroconductivity and PH. Replaced all filters in the system, replaced on washing… Every other day is enough, during daily cleaning there is no dirt on the filters. The girls are handling the environment well, leaves are raised as they should be, they seem like very happy plants. Formation and enlargement of flowers can be noticed with the naked eye. The wave of warm weather continues all this week. Expected temperatures for the next seven days range from 25-29c. Need to pay attention to that Raise light 10cm, top of canopy now is around 50-55cm PAR map 980max/650min PPFD, VPD -1.2-1.3, DRH 50-52%, NRH 45-48%, NT-21-22c, DT-24/25.5c, Leaf temperature 22-23c, Light distance 45-55cm, CO2 700+ppm HLG Scorpion Diablo @ 80% - 50-55cm distance 60s ON time 20min OFF time @ Day Time 60s Off time 30min OFF time @ Night Time NT-Nutrient Tank - PH -5.95-, EC -1.24, Temp-21-22 31.03.2024 Girls totally recovered from defoliation. Almost all gig leaves grow again on all girls. Tropicana Cookies is joy to grow , its pleasure to watch this girls haw fast and beautiful it is! Tropical condition continue. Temperatures going from 26-29c, night temperatures still colder and stay around 16c Outside temperatures affected water temp in nutrient tank, will se if i need for a water chiller or i will cool with adding cooler nutrient solution. Lower wattage on light , set Diablo @ 75% Replaced all filters in the system, replaced on washing… Refilled the tanks with 15l of fresh mixture. 25ml AN connoisseur A+B + 3g Big Bud Powder + 7.5ml Silica - total 15l @ 1.21EC PAR map 1180max/680min PPFD, VPD -1.2-1.3, DRH 48-52%, NRH 42-48%, NT-22c, DT-25/25.5c, Leaf temperature 22-23c, Light distance 50-55cm, CO2 700+ppm HLG Scorpion Diablo @ 80% - 50-55cm distance 60s ON time 20min OFF time @ Day Time 60s Off time 30min OFF time @ Night Time NT-Nutrient Tank - PH -5.95-, EC -1.21, Temp-22-24 01 04.2024 Outdoor Climate: It’s hotter outside. I’ve set the Diablo at 73% to maintain temperatures in the box within the 25-26°C range. Humidity: After defoliation, the humidity is low, which is great! The dehumidifier hardly worked this week. Misting Routine: I start the day with a 3-minute misting session; this will be the routine for now. Nutrient Solution Temperature: I’m keeping the nutrient solution temperature between 20-23°C. I refill the tank twice a day to cool down the solution. Light Parameters: PAR Map: Maximum PPFD is 1080, minimum PPFD is 650. VPD: Ranges from -1.2 to -1.3. Daytime Temperature (DT): 25-26°C. Nighttime Temperature (NT): 22°C. Leaf Temperature: 22-23°C. Light Distance: 50-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 73%, positioned at a 50-55 cm distance. Lighting Schedule: Daytime: ON for 60 seconds, followed by 20 minutes OFF. Nighttime: OFF for 60 seconds, followed by 30 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.9 and 6.1. EC: 1.18. Temperature: 20-23°C. Week 4 off Flowering in Summary 120 litter off RO water, 210ml+210ml AN connoisseur A+B, 18g Big Bud Powder, 45ml Growth Technology Liquid Silica 70kW electricity in total for light, Pumps and AC Infinity Fans. 63kW for Light + 2kW Dehumidification + AC Infinity ventilation Week start @ 1.31EC, nutrient strength., keep strength @ 1.24 till the end of the week Girls look superb all time, Wedding Cheesecake have two pheno, really like buds on one girl Tropicana Cookies fill bud sites this week a lot, Purple Lemonade is going to be tallest from all three stains. Nice bud formation also. PH was stabile and move from 5.90 min to 6.2 max. Light distance for this week - 50-55cm from tallest top , PPFD levels around 1100 in center, trough whole week. Lowest reading 680 @ corner Temperature are from 23c at start off day to 26c max at some points. AC Infinity T6 extracting fan program in AUTO to kick in @ 26c Night temps around 21-23c, dehumidifier work less this week. Outside humidity is low this week Water temperatures in middle off week start to rise, refilling solution is cooled to bring temp back from 23-24 to 20c Defoliate girls on first day off this week, pruning off smaller branches, lots off foliage is removed After defoliation humidity drop immediately in box. Need to bring back humidifier for couple of days. RH was low trough whole week Day RH is moved from 45% to 50% max, at night times drop to 40-45% Next week outside temperatures continue above average for this time of the year. Continue in next week, starting probably with one more light defoliation, bigger fan leaves only
Likes
5
Share
@seth
Follow
Week11😎 Last week of this beautiful pink rozay . A bit little plant but so smelly and dense with buds. Flushing since 1 week , i will do another flush then i will harvest. Ph 6.8 Ppm 150-200
Likes
20
Share
21/12/20 inicio de semana esta pequeña esta ermosa al contrario que su hermana que estoy cultivando muestra otro feno esta mas como un pino esta estirando pero muy uniformem 23/12/20 62 cm de altura 27/12/20 cierre de semana
Likes
133
Share
@PapaNugs
Follow
Transplant went well today. The girl got three weeks in the tiny pot and barely grew any roots. Surprising honestly. Gotta water more thoroughly I guess. But all is well and will start the beginning process of training soon. Lights at 40% power. Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
470
Share
Day 8 : Still watering a small amount everyday, before lights turn off. No nutrients, only my lentils juice, to help roots production. She show no deformation, leaves have a perfect shape. That's something i was used to with auto ^^ She is a bit too tall in my opinion, but she's not stretching anymore. Good. Still planning to add dirt on the top, to simple solve this. She Spend day outside, the weather is still perfect.
Likes
5
Share
@GrowFunMD
Follow
Harvested Plant #2 and Plant #3 at 11 weeks. Still have #4 and #5 to go. They are just about ready. Been waiting until the leaves turn purple. These plants have been flushing for weeks because I thought they were going to be done sooner, but they haven't missed a beat. They have a very strong, sweet smell. I highly recommend Cobbler Crisp!!!
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
2
Share
So far nothing to complain about buds sites are putting on some size....clone piece is holding up pretty good....hoping she get some roots this upcoming week...never really clone before
Likes
4
Share
Likes
17
Share
Hung up my new California Lightworks UVB supplement light. I think I originally hung it a bit too close (18 inches from canopy) based on the subtle color change in the leaves, so I raised it up to 24" above the canopy. I was most certainly skeptical, since this is my first time using UVB, but even over the course of its first week under the bulbs I've notice a VERY visible increase in trichomes. Every one of this plant's buds is COVERED in trichomes! It looks like someone sprinkled sugar all over the damn place!