Likes
Comments
Share
@Alvareas
Follow
Diese Woche war ich fünf Tage im Urlaub. In dieser Zeit musste Blumat seine Zuverlässigkeit beweisen. Das klappte problemlos – wie erwartet. Ist das System einmal richtig eingestellt, läuft es zuverlässig – solange der Tank regelmäßig nachgefüllt wird. Die Pflanze hat sich diese Woche um 16 cm gestreckt. Ich rechne noch mit etwas weiterem Stretch, aber nicht mehr viel. Insgesamt dürfte die Streckung am Ende bei etwa 100 % liegen. Die Blütenansätze haben sich diese Woche sehr gut entwickelt. Lollipopping an Tag 21 ist dennoch sinnvoll, denn schon jetzt sind viele Triebe zu sehen, die später nur kleine Popcorn-Buds bilden würden. Diese Woche wurde es deutlich wärmer, mit Spitzenwerten von 30 C° im Grow Room. Im Zelt stieg die Temperatur während einer Lichtphase entsprechend auf bis zu 32 C°. Die Pflanze hat das gut verkraftet. Da es in unserer Region bisher nicht geregnet hat, ist die Luftfeuchtigkeit noch niedrig. Mit den ersten Gewittern und Regenschauern dürfte sich das jedoch schnell ändern. Die Parameter in Woche 8: Controller Einstellung Tag: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Controller Einstellung Nacht: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Durchschnittliche Tagestemperatur: 30,4C° Durchschnittliche Nachttemperatur: 27,4C° Durchschnittliche Luftfeuchtigkeit Tag: 53,1% Durchschnittliche Luftfeuchtigkeit Nacht: 54,3% Durchschnittlicher VPD Tag: 1,6 Durchschnittlicher VPD Nacht: 1,3 Durchschnittliche Bodenfeuchtigkeit in Mbar: 114 LED Leistung: 40% = 120 Watt Beleuchtungsdauer: 12 Stunden Umluft: Stufe 2 oszillierend
Likes
248
Share
@Ju_Bps
Follow
Hello my friends 👨‍🌾👩‍🌾, It was the last flowering week, Week was good, Buds are nice and frosty ❄️❄️, main buds really fat 💦 I've given 3x 2 l/plant Water + Cannazym Water + Cannazym Water + Cannazym PH@6 Lamp @75% Harvest this week end 🌲✂️ See you soon for harvest ✂️ and have a good week end my friends 🔥👨‍🌾👩‍🌾 Thank to Mars Hydro and @marshydrococo2 for sponsoring the FC3000 ❤️❤️, as well as @Fast_Buds for sponsoring the Seeds ❤️❤️ If you want a litle discount on your Mars Hydro order, add this coupon to your cart, "Ju_Bps" Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light 42 Fast Buds - BANANA PURPLE PUNCH🍌🌲 https://2fast4buds.com/seeds/banana-purple-punch-auto
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 30/11/2019 - Struggling with high humidity, change led strip color from red,green,blue to red and green. 1/12/2019 - Checked and adjusted the light distance. 2/12/2019 - Pot feels light and dry, gave her 1,5l PH 6.3 with a 1/4 of recommended Biobizz nuts, notice almost no run off. 3/12/2019 - Finally her first pistil appeared on the main stem I was starting to get worried.
Likes
8
Share
È stata una settimana bellissima e calda. Tutte le varietà sono vicine alla fase finale della fioritura e ognuna ha il suo forte aroma particolare. Tutte quasi piene di infiorescenze dure e molto appiccicose ormai stanno completando il loro processo di fioritura in maniera impeccabile. Come sempre queste varietà dutchfem seeds autofiorenti sono una soddisfazione! Alcune sono di tipo XXL mentre altre di taglia media ma sono tutte piene di infiorescenze e continuano a riempirsi quindi verrà applicata una raccolta graduale tra una settimana o due al massimo. Sparito ogni insetto nelle piante a causa della resina appiccicosa. Sono felice un abbraccio a tutti.
Likes
5
Share
@123Grow
Follow
Filling out the trellis net. Looks like another 2-3 weeks until I flip the ladies. Using SST’s, LABS and natural inputs for this grow. I have made some mistakes in the past using Organics, but have figured out HOW to use them for an entire grow. The vegetative state, I have never had a problem with. The transition into the first 3 weeks is when I have had the most issues. After a little research and testing, I finally have a basic blue print of how to feed plants in flower for 10-12 weeks now or shorter. Mark Bowell from Perfect Gardens on YouTube and Mr Canucks Grow from Canada are my largest information inputs. Final Thank you to Mr McGooz for keeping me in the know. 10-11: yes, some of the stalks are turning purple. This is not due to phosphorus, magnesium, or any deficiency. It is due to the light being too intense for the plants. I am at the max distance and running the light at 30% ( it’s a 600 watt 🤣🤣). Soooo yeah, that purple is going to stay for a bit. Purple with other leaf discoloration or senescence IS a problem, purple stems with NO leaf issues isn’t serious issue. Cant it be fixed? We are going to find out….Photosynthesis Plus will be on hand in the next 5-6 days. This permits the plant to USE more of the photons ( yes, I have carbon in my media). This should minimize the purple and allow me to UP THE WATTS 🗣️🗣️ 10-14: spoke to my “guide” and we made the decision to go ahead and flower these ladies. We saw how much stretch there is to be had and realized we are currently filling the trellis by 75%. We are estimating the entire 4x4 area to be completely filled. I defoliated and pruned the smaller sites off the lower areas of the plant. Not quite lollipopping, just selectivity choosing sites to keep and bones that will get in the way. For transition I am using a ratio of 1:1:1 on NPK’s to ease the flip. The ppm’s will be between 750-800. Once we reach early flower, we switch the NPK’s to 1:3:2 ( flower girl by Dr Earth OR Fish bone meal and langbenite). I switch each feeding between the two for 5-6 weeks. At week 7 we switch to 0:3:3 ( seabird guano and Langbeinite) at 500 ppm’s. Week 8 the same feed. Week 9 kelpseaweed/water Only ( these are 10 week cultivars). Thank you for taking the time to read. 10-16 😍😍😍 Plants are starting to show deficiencies!!! Yes, normally one freaks out 😂😂😂 The slight deficiency is a sign that I can go ahead and start: The Flowering Cycle. When using Organics, you have to use your eyes because nothing is specific. Meaning: you have to see when the amendments are running out to A: Top Dress B. Make compost teas. We are going the compost tea route for flower. I made a video showing exactly what I use. The ratio is 5-5-5 ( yes earlier we were going to use 2-2-2, but we found out there is no calcium or magnesium in the all purpose mix by Dr Earth…another reason to learn to read your plants).
Likes
102
Share
Hi people! Smell!!!! sooo delicious smell! sweet aromatic! I just want to bite off one of the buds and eat!)) buds develop very well .. you can see how many there are .. they are everywhere .. especially under the leaves .. and so I think ... Or maybe you can do 1 more defoliation? the last one? what do you think, or not to bother her more?
Likes
8
Share
@20SYL
Follow
Dernière semaine de rinçage, récolte dans deux ou trois jours !
Processing
Likes
10
Share
@PisBaked
Follow
Everything is looking amazing! All plants are at 4.5wks -5wks old now. Growth is extremely rapid. PPMS/PH of run off is less than what's going in! Still feeding to run off daily; vacuuming out the water everytime!! They're starting to need close to a gal. each :D I have defoliated & continue to pinch lower plant growth to lolly pop each branch -- I find this the best method hands down for autos.. The canopy for the most part is even with the exception of LSD-25, Fruit Punch, & most importantly; the one GSC (fast buds) -- it is a fucking monster as you can see (tallest plant by FAR). Cant wait to see the buds on what appears to be a Sativa dominate GSC pheno -- this plant was under the same 630w's worth of CMH along with the other GSC -- because it keeps growing, and was starting to developing light burn on leaves closer to the CMH's I've since switched spots with a GG#4 & it's now under two 600w LED's; growth continues to stretch on her, but I'm less concerned now that it's under less intense lighting, with a bigger distance from the lights . Other than that, things are looking to be on track for an epic harvest. Once buds start forming, I will drop the temps on the AC gradually to bring out the colors in GSC/LSD/Fruit Punch -- with lights/fans on full blast I can hold temps as low as 70f / 30% RH with the AC at less than 50% - Will be uploading more pics this weekend!
Likes
23
Share
@Sators
Follow
🌱Day 64.💚 🌱Day 66.💚 🌱Day 68.💚 🌱Day 70. Hot reason why in UK most grow tent heat up, my grow tent temperature reach already 36 degrees. O lalaaa…I will get experience…😆💚
Likes
23
Share
It has been another great week for these Fastbuds ~ Wedding Cheesecake Autos!! Today is day 22 from seed and this upcoming week all 5 will be getting Tied down for LST ! All are getting same veg feed just but make sure if you are using rapid start your gonna have to mix in PH up in your feeds! Light is at same height and is at full power just letting the plants grow into it! Well hope you all enjoy, and please let me know if y’all have any questions I’ll be glad to answer! Bless y’all and stay tuned for next week! Peace y’all
Likes
Comments
Share
So everything took off in flower, I was super harsh with the defoliating which initially I regretted, but was surprised with how they packed out during the following weeks. In general it's impressive how hardy these plants are. Even the outdoor grows yielded some quality. Add some more nuets (overdrive and carbo load), before flushing about 14 days before harvest, next time I'll do this earlier and really the Runtz could have gone another week but my drying needs to happen in the same space as my growing for now. Apologies for the quality of image, I'm just using my phone and some bits I have to document, I collect records too, so expect weird noises lol. Build a rotating plat from a lazt susan I found, has been the best piece of kit added this season.
Likes
41
Share
Starting week 3 of flower Molasses water Light defoliation
Likes
1
Share
"The 3rd day in flowering. I give 2.2 liters of water every 2 days. I'm still experimenting with how long the timer needs to run to give enough water. 😎✌️ BT6 The stretch is strong and i have no space left 👀 5weeks Vegi was to long
Likes
4
Share
@blaze_fpv
Follow
I came back to the fridge after 6 days and stretch was running massively. They grew like 20cm in 6 days I changed my climate to: 27° C 60% rlf in order to adapt to early flower Day and Night same 45% light about 580ppfd Still running the water in a circle. Adjusted the scrog a bit in order to fill the space more They eat like 1100ppm CO2 an hour 😎 __________________ Update: last 2 videos show day 8 of flower ,🤙🏼 Decided to give them a heavy defoliation due to it being a closed loop system and them emitting tons of humidity. So far so nice 🏼
Likes
20
Share
Gracias al equipo de Fast Buds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁🍋🍊 Lemon Mandarin: Esta variedad es para los amantes de todo lo grande. La Lemon Mandarin es el resultado de nuestro trabajo de cruce de dos deliciosas cepas cítricas: nuestra matriz Lemonade cut y la Tangie (selección de Crockett's Family Farms). Nos aseguramos de que se combinaran los mejores atributos de sus padres, como un efecto eufórico y vigorizante, una producción de tricomas demencial y un perfil de terpenos cítricos agridulces. La Lemon Mandarin es ideal para los amantes de los árboles enormes y los rendimientos XXL: puede alcanzar alturas de hasta 200 cm, mostrando una resistencia extrema y muchas ramas laterales. Su aroma es una mezcla perfecta de la Tangie, cáscara de limón y la dulzura calmante de la mandarina madura, que envuelve los sentidos en una fragancia profundamente picante de mandarina-limón que perdura mucho tiempo después de fumarla. Se comporta perfectamente tanto en interior como en exterior, y su impresionante crecimiento y encanto aromático la hacen ideal para los cultivadores que buscan una cepa realmente excepcional con una compleja fragancia cítrica. Basándonos en nuestra experiencia, aconsejamos realizar el Scrogging o cualquier otro tipo de sujeción, ya que las ramas podrían no ser capaces de soportar el peso de los cogollos. En interior, para conseguir el máximo rendimiento por planta, no coloques más de 2-3 por metro cuadrado, ya que esta variedad se vuelve muy tupida. También podría beneficiarse de una defoliación más frecuente, ya que produce muchas hojas grandes y anchas en abanico, y podría necesitar ayuda con la aireación más adelante en la fase de floración. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/lemon-mandarin 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 📆 Semana 13: Por fin ha llegado la hora del lavabo de raíces y la próxima semana cosechando, los cogollos son tan pesados que le cuesta sostener a las ramas 😅
Processing
Likes
12
Share
@cherokee
Follow
Привет, всем ✋. На этой неделе я сделал топпинг своим растениям , удалил верхушки и буду формировать растение по технике main-lining. ________________________________________________________________________________________________________________________________________ Ребята предлагаю всем желающим подписаться на мои социальные сети где я делаю еще больше контента о каннабисе. Подписывайтесь, пожалуйста, буду рад всем 😜 !!! 👽 Instagram - https://www.instagram.com/jedi_genetics/?hl=ru 👻 YouTube - https://www.youtube.com/channel/UCRFN2LzgQ4gxDj-6CIIr82g ________________________________________________________________________________________________________________________________________
Likes
13
Share
Got super busy and failed to take many photos or videos, also there hasn't been much going on this week in the garden!