Likes
Comments
Share
@Hempcules
Follow
WEEK 9 Everything is going well so far, apart from the lack of space due to its size. Other than that, it really seems to show strong Sativa genetics. Unfortunately, I can’t fully cover it with light, but I’m trying to make the best out of the situation. PPFD: 750µmol/m²/s Water: 3x water 2x nutrient solution Vpd: 1,6Kpa
Likes
23
Share
@Prilyfe13
Follow
July 29, 2024 So I was going to wait to harvest at the end of this week, but a friend of mine said I should harvest now. I agreed after looking closely at the trichomes. Sour Diesel A weighed in at 20.5 Oz wet weight. No trimming. Sour Diesel B weighed in at 19 Oz wet weight. No trimming. Sour Diesel C weighed in at 23.5 oz wet weight. No trimming. Sour Diesel D weighed in at 18 Oz wet weight. Partial wet trim. The cola is solid, so I couldn't access a lot of the stems from the fan leaves. It'll be a pain to trim I think. The environment should be around 65° and the humidity just below 60%. I'll strive to keep it that way. I shouldn't have a problem with the humidity still being high in my room. I'll be back in 10 to 14 days with a final yield and smoke review. July 30, 2024 Quick update with estimates. The environment in the tent is off by a lot today. I'll have to open the tent once or twice a day to let the super high humidity out. I hate my portable AC. So based on the 81 Oz wet weight and my previous runs, the weight retention after trimming should be around 13%. That should be a total of around 10 oz. It may be a tiny bit more or less. With Sour Diesel D being partially wet trimmed and being so dense, it might increase the total dry weight a little bit. But it could be as low as 8 Oz. We shall see. July 31, 2024 You know, it really sucks when the humidity still spikes and now the tent is too warm. However, as I'm writing this, the central air kicked on. This should fix it all, but I'm still running into super high humidity at night and in the morning while the AC is off. I really hope this doesn't mess up the final product. August 2, 2024 Day 4 of drying. Everything looks good so far. The humidity is still way too high and I'm thinking I should've wet trimmed just because the humidity is so high. Too late now. Anyway, I'm monitoring closely. The exhaust fan is maxed out to help keep air flow constant. That way there's less chance of mold and mildew. I also have both oscillating running below the plants with a small dehumidifier in the middle. It's not keeping the humidity down to a reasonable level, but it IS keeping it lower than it would be. With the fans running, it's evenly leveled out through the tent. The only issue is the temp. It's a bit on the warm side. I'd like it to be at 65°. Currently it's hovering between 69° and 70°. August 4, 2024 Day 6 of drying and these ladies are taking their time. Unfortunately it's because of the super high humidity we ran into the day I harvested. So I'm fighting with 71% humidity in my bedroom. It's crazy. The portable AC is doing absolutely nothing except keeping the temp below 70°. That's good, but it's not good enough. Oh well. I'll just keep opening the tent up with the bedroom light set to green to ensure they air out and let fresh humidity in. Lol. I'll keep checking in until they are done drying. August 6, 2024 Quick update. These ladies have been drying for 8 days now and they aren't ready yet. I'd say another 5 to 7 days. With the humidity being so bouncy, I feel like something will get messed up. It probably won't. I have the exhaust fan up and the oscillating fans going. Should be safe from mold and whatnot. But still. Currently, the temp is at 63° and the humidity at 60%. Hopefully it stays that way for the next few days. At least during the day. I have an idea for night time. It gets pretty humid at night. So I'll turn both dehumidifiers on when I go to bed and turn them off when the AC kicks on. That should technically keep the humidity down, but the temp may go up. However, I do run the portable AC at night to keep my room cool enough for the plants. That brings in a lot of humidity. Still no clue why, but it does. Anyway, the whole idea should work. I just have to remember to shut the dehumidifiers off when the central AC kicks on. August 8, 2024 We are at day 10 of drying. Still another few days left. So a good thing to note is the size of the buds. They didn't shrink all that much. To be honest, they look like they've only lost about 25% of their size. Not a bad thing in the slightest. Hopefully with that being the case, the yield will be even bigger than I calculated. I'd also like to make a correction with my original calculation. My average yield is 15% of wet weight. That being said, I should be looking at closer to 12 oz total. 81 oz. x .15= 12.15 oz. We shall see how close I am now. August 10, 2024 It's now day 12. These ladies are nearly done. I'd say another 2 to 3 days. Not much else today. Just a quick one. I weighed Sour Diesel D. She weighs 4 oz now. A 78% drop in weight. That being said, I think I can safely say this one will yield around 2 oz. Maybe a hint less. Which completely messed up my calculations. Now I don't know. I think I'll go back down to 8 to 10 oz. And if I get 12 oz, what happy surprise. I also made sure to check them for mold as I do every day. So far it looks great! No signs of anything unwanted. Just beautiful trichomes glistening in the light. Update: Sour Diesel A was the first to finish up. She had a perfect snap. Dry trimmed yield is 67 grams. 2.4 oz. Around what I thought I was gonna see. I'd say the rest will be trimmed over the next 2 to 3 days. August 12, 2024 What a couple weeks. We are talking like 14 days. At the end of it all, I ended up with 10.65 oz. Right around where I was thinking. Sour Diesel A 67 grams Sour Diesel B 78 grams Sour Diesel C 79 grams Sour Diesel D 77 grams. For a grand total of 302 grams. Weight retention 13.15%. almost exactly what I calculated. What's funny is that they are all roughly the same weight except for A. The plants were all different and still yielded roughly the same. C was the largest, while D was technically the smallest. All of the plants have solid buds. B has airy but hard buds. It's not perfect, but this plant had the most foxtails, so I'll have to remember there was some sort of issue. I'm thinking it was the heat stress. Must have been a pocket where the air didn't flow. I'll have to fix that next run. The smoke is fantastic. Super fire. Great high and lasts quite a while. 30 days of curing and then storage. I'll be using Grove Bags. August 15, 2024 Quick update and then some bad news. I fit each plant in its own 1/4 pound grove bag. They are now curing in a box. The average temp is around 68°. Humidity is perfect at 62% I haven't sampled each plant yet. Only A and B. I'll be sampling C and D next week. All in all, I'm pretty happy with this run. The yield was a bit lower than I was hoping for in the beginning, but it's still not too bad. Especially because I had some issues along the way. Now for the bad news. I'm losing my home in a couple months and won't be able to grow anything for a while. I have no idea how long it's going to be before I get a new home, and it could take up to 2 years given my situation. But I will be back when I'm able. Thanks for all the support and compliments. On a more positive note, I still have a good pound of weed to hopefully last me til I get a new home. I don't smoke a ton, so it'll last quite a while. Later my growmies.
Likes
3
Share
Likes
31
Share
Hey everyone 👋 Here's this week's update: Matcha is still small and I believe she'll stay like this but at the time she's doing better compared to last week, so that's a win. I wonder, did I do something wrong? Was it the lack of CalMag or maybe the heat? Maybe I got a weird phenotype? (I doubt this) or what else could've happened to her? The truth is there are tons of different things that could've caused this and I wish I could know what could've caused this (I'll be making a grow question regarding this). Pistachio on the other hand is doing well, she's huge compared to her sister and she grew a looooot this week! Some leaves are slightly dark and some tips are a bit too bright as well but there's no signs of burn so I assume she might be on her the limit! Personally I suppose the mycorrhizas might be the ones at fault in here. They make feeding more efficient so probably the "normal" dosage might be a bit too much for them... and for that reason alone I decided to lower the amount of Green Grow that I was using, hopefully that will help. 🙏 I also decided to give 10 weeks of vegetation to these plants. Hopefully Matcha will grow a little more during this time (she's still at 20cm) but at this moment I expect nothing from her, I'll just allow her to surprise me haha. 👻 Thanks for reading! See you all in the next update! 😃
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""
Processing
Likes
2
Share
Hola familia, siento la ausencia estos últimos 8 días, pero estoy de vuelta, estás misty gorilla auto de Zambezaseeds, están fenómeno, ya empiezan a desprender aromas, y eso es agradable, espero que engorden más estas flores por lo demás va bien, entonces la temperatura la mantenemos por debajo de 26 la humedad por debajo del 40% , sigo alimentando las con Agrobeta, por supuesto, os voy adelantando que va a ver muchos cambios cara al futuro y para bien, os iré diciendo poco a poco. Un saludo fumetillas y buenos humos.
Processing
Likes
45
Share
@LovelyT
Follow
Killer purps is growing great! This plant suprises me everyday with more and more new growth. This plant gives off a really skunk type of diesel smell combined with a fruity maybe blueberry sort of smell. Alot of resin on the sugar leaves. Some of the pistils are already turning orange. Happy growing everyone. Hoping for atleast 2.5 ounces but fingers crossed what do you think my yield would be.???🤔
Likes
1
Share
Likes
151
Share
@BioBuds
Follow
These XtraKush are also finally starting to grow. It took them a while but they doubled in a week. Still a little bit pale compared to the other two strains. With a new top layer of first worm castings and then neutral organic cocopeat to combat the gnat problem and we seem to have fixed most problems. Temps are going down at night, I'm trying to fix this by keeping it warmer in the attic where the grow is. In the coming week, I'm going to train/manifold them, they are getting a bit big. Check out the great discounts on mars-hydro.com Contact @MarsHydroLED for special offers!
Likes
17
Share
Why hello we are here now with the Payapa Bomb x Cotton Candy auto! I had some slight issues with the germination she took a bit longer than expected! And I lost pictures :( but we are at the end of 1 week of veg! She is full seedling turing into a bigger girl everyday! I have gave her some light nutrients just a root drech, some mycorrhizal for the roots! Im excited for this grow, I've never done a fast flowering plant before! Im assuming the flowering time will be faster but I can keep her in veg a while to get the plant big we will see!!!!! Mmm any ideas? Lets go papaya!!!
Likes
10
Share
@Skully
Follow
🇩🇪 Alles sieht großartig aus! Der Geruch ist sehr fruchtig und intensiv, die Buds sind schön angeschwollen und steinhart. Noch ein/zwei Wochen, dann wird sie zwei dunkel gestellt, um nochmal das letzte rauszuholen. 🇺🇸 Everything looks great! The smell is very fruity and intense, the buds are nicely swollen and rock-hard. Just one or two more weeks, then I’ll put her in the dark for a bit to get the last bit out. 🇪🇸 ¡Todo se ve genial! El aroma es muy afrutado e intenso, los brotes están bien hinchados y duros como una roca. Solo una o dos semanas más, luego la pondré en la oscuridad un poco para sacar lo último.
Likes
7
Share
Late flowering smels is awesome like sweet and spiecy both on melane aroma tricome heads are coloured and ready to harvest
Likes
30
Share
This week waz beautiful, i flused the 1st plant JackHerer Haze Xl its been 88 days from seed shes ready to harvest! Still got 2 to 3 more weeks to go with the other plant im beyond excited lets go! Love the trichomes production, she smells so good as well! The 2nd plant is looming great really thicking up! Im super greatful shes taking to the nutrients ive been feeding! Just the over drive, and bud candy this last week. This coming week im thinking i should flush but i dont wanna lose a week of feed if i should be feeding so ima have to do some thinking!!!! Any thoughts much love happy growing this is exciting
Likes
1
Share
Vaped some lower buds and the taste is as advertised like tropical fruit or fruity pebbles
Likes
44
Share
Che dire... Wow! La mia piccola sembra non aver accusato minimamente il mio errore ed ha proseguito magnificamente! La fioritura è cominciata e si sente già quell'odore pungente quasi dolce di formaggio 💚 è ancora presto per trarre conclusioni ma lo stress non sembra esserci stato, semmai il contrario! Sembra crescere come una sativa..
Likes
132
Share
@rhodes68
Follow
11/1 In the water - bottled 6.0 - under the eye of the vicious Woodstock on the heated seedling mat. 2 Green Crack going into 5 gallons of washed and buffered coco 60% and perlite 40% using cocotek A and B nuets No nuets of course 11/2 On the paper towel, all look cracked on quick inspection 11/3 Cracked no tails ... at all... getting nervous... hate this part 11/4 Still no tails, the two Fastberry have already sprouted and been planted. Nervous again lol 11/5 Still no tails, going to drop two more later though Ive no confidence in them at this point. update: Holding off dropping two more, getting some activity (not breathing easy yet) from the first two. Seems my last ditch effort of a 3% peroxide solution soaking the seeds MAY be working. Wait one more night 11/7 Planted to very very sad germs out of habit more than hope on em. H2O2 works just wasnt much more to be done on em. Dropped two more into the water from the second pack of seeds, maybe it matters. 11/9 Tails on both, planted in coco. Looks like that first set of seeds is ... questionable :) 11/12 Finally some green! One is up nothing from the others yet. At least I have a grow now :D 11/13 One is up fairly strong the other is up but not looking as well may be a problem here just watching and waiting. Calling this Day 1 , will name later if things go well 11/14 New pics, both up looks like I have a grow Ladies of SciFi... Meet Ripley and Tara Going to carefully poke around in those first two pots that didnt sprout. See If I can learn anything. Need to figure out how to prevent that kind of thing. 11/15 New Pic. They growing well now. Found on the two other pots the seeds never did anything after planting which is what I expected to be honest. Afraid that seed pack is a no-go Feeding mix - 2 cups at 5.9 of each, .6ml CocoTek A & B, Fish Sh!T to runoff until transplant 11/16 New Pic and Vid The GC is playing a game of catch-up with the Fastberry Feeding every day now will go to twice daily when large enough. 11/19 Day 6 Really liking the coco coir. two feedings a day at 5ml cocotek A&B and 4 ml Fish Sh!t / gal at 6.0 Meter got in - TDS of the above feed is 575 with tap water being 210 giving a nuet level of 365 well within seedling and early veg limits, so plenty of room down the road. Will be working it up as I feel right 11/20 End of week 1 ... heh finally :) Put a lot of thought and study into this and adjusted the feeding. This in response to some slight lightening at the leaf tips suggesting nuets too high. Water TDS 220 ( gonna have to get a filter soon) so subtracting that I have the solution at 230 ppm (@2.5ml/gal cocotek AB with 2ml Fishsh!t which has little impact on TDS ) PH to 6.1. 450 ppm without adjustment which was my real target here. Fertigating twice daily to 5% runoff, transplanting when roots start poking out. Gentlest way I can think of to try and catch these babies up a little.
Likes
11
Share
Shaping up nicely with LST. Minor defoliation to remove unwanted growth sites. Down to 7 main colas, let’s get them fat. She will wake up in flower tent tomorrow. Check out my planet of the grapes auto diary for sprout in back of tent. Video/photos taken 49 days after breaking soil.
Likes
1
Share
She’s budding up nicely finally done stretching and starting to smell strong
Likes
4
Share
Another week another diary we are keeping busy in these difficult times spending some extra time with our ladies and we also started a new diary we really appreciate if you can check it out and give us a like as for these ladies we added hy-pro Generator to the mix this is a new hy-pro additive which helps with maximum growth, protection against stress, strengthens the immune system and leaves no residue in the water again we are amazed with the quality of the hy-seeds, the plants look really great and the flower development is off the charts the combination of hy-seeds and the hy-pro nutrients created a winning team we removed the bottom 30% of the leaves and twigs so that the plants does not put effort in the little flowers that get trown away anyway that was basically it for this week Talk soon Stay safe, stay green Cheers, Nibameca