Likes
Comments
Share
Sorry I've been missing weeks I've been very busy
Likes
10
Share
Die Wurzeln hatten das gesamte Volumen des Topfes durchwachsen. Die Hauptwurzel war allerdings nur etwa 15–20 cm lang; der restliche Wurzelballen bestand überwiegend aus sehr feinen, stark verzweigten Wurzeln. Wahrscheinlich lag das an der unzureichenden Belüftung des Wurzelbereichs. In einem Stofftopf wäre das Wurzelsystem vermutlich besser entwickelt gewesen. Die Trocknung erfolgte in einem Textilschrank auf dem Dachboden. Die Temperatur lag nachts bei etwa 5–10 °C und tagsüber bei ungefähr 10–15 °C. Das Gesamtgewicht nach der Trocknung betrug 117,55 g. Der durchschnittliche Gewichtsverlust während des Curings lag durchschnittlich bei etwa 2,61 % (siehe Tabelle). An der Messung des Gewichtsverlustes während des Curings nahm nicht die gesamte Ernte teil, sondern lediglich ein Teil davon. Die untersuchte Menge war jedoch ausreichend, um den durchschnittlichen Gewichtsverlust zu bestimmen. Das über 49,9 g hinausgehende Gewicht wurde ordnungsgemäß entsorgt.
Likes
11
Share
Likes
16
Share
Ich werde am nächsten Tag anfangen zu entlauben und bereite sie auf die Blüte vor.
Likes
14
Share
@Cannabot
Follow
Transplanted into final this week,both have started pistolling so I'd say from next week it will be 1 week flower.My dog chomped on one or 2 leaves which really pissed me off...OCD like that
Likes
3
Share
Prima settimana di fiori 12/12... Stiamo per terminare la prima settimana di fioritura...Si dovrebbero vedere già i prefiori........,.. vediamo tra un paio di giorni 💪🔱🙏
Likes
3
Share
Had to do this for the contest so I didn’t screw up my other diaries!
Likes
1
Share
@Ninjabuds
Follow
It’s the 1st week of flower I flipped the plants to 12/12 a few days ago. There is a lot going on and a lot of cool and amazing things coming in the near future. Make sure to check out my YouTube page. I bought me a DJI gimbal this week. Might be my new favorite toy. The temps are starting to break for the summer. I don’t see it being very long until winter is here and it’s time to use a heater and not an ac unit. All of the plants are healthy. The plants have all grown so well I turned down the light intensity a bit today the plants didn’t seem like they was starting to strech very much. Hopefully the lower light intensity will make them strech out just a bit
Likes
9
Share
@Sauce_XL
Follow
2.24.2024: Start of week 5 from seed. Started to flower last week. Nothing done today. Still no nutes given, still scared to defoliate. Plant is 15.5 inches tall and looks healthy. Light is 11 inches from the top and at 75% power, 112 watts. I'm clearly no expert and i'm sure there's something i should be doing(feeding) but she's chugging along. 2.25.2024: Day 37 from seed. Watered 64oz at 6.3ph. Bud development is slower then her tent mate. Perhaps thats due to her bushy stature and foliage. Still seeing solid upward growth each day. Hopefully she turns on the jets this week. Still no auxillary nutes given. Finally worked up the nerve to take off 8 fan leaves. Really opened the plant up. Hopefully i don't pay the price! 2.26.2024: Day 38. Small bit of upward growth. No negative affects from the defoliation yesterday. Will feed tomorrow for the first time at 1/4 strength nutes from the fox farm trio and maybe some calmag. 2.27.2024: Day 39 from seed. Finally fed the plant, albeit small amounts. Foxfam trio at 1/4 strength of the week 5 doses plus calmag. 64oz of the solution at 6.5ph. 2.28.2024: Day 40 from seed, 36 from sprout. Nothing doing today. Maybe a 1/4 inch of upward growth? Stuck around 19.5 inches in total height. Light at 75% power 11inches from the top. 2.29.2024: Day 41. 96oz of ph 6.5ph. Upward growth has stalled at 19.75 inches. Added a few handfuls of Ocean Forrest as i noticed the soil level has compacted a bit. Will add pics later today once she perks up a bit. 3.1.2024: End of week 6, day 42 from seed. Small bit of upward growth, now up to 21 inches. Besides some lite defoliation, i've let the plant do its thing. Since its my first time i figured the only goal is just to get to harvest. Lots of learnings thus far. FFOF probably isn't ideal but its working. Some burnt leaf tips, probably some nitrogen toxicity, but otherwise we're doing well. Will definately look to LST more and sooner next time around.
Likes
25
Share
Welcome to my Purple Haze Autoflower sponsored & by MSNL seed company. Well, its pretty much in the name. And I think even the most newest person to cannabis has heard of it. Like White Widow and Skunk. Its kinda a house hold name in this industry. And been what it is. I've no doubts MSNL will have made a blinder. As for achieving purple in the pheno. I find. You've to have everything going strong and no mess ups to give you a higher chance of getting purple. Even, then you may not get it. But, color of fan leafs has never really been important, nor will it ever be. I do have the temperatures to help me get purple if I want. But, asl I do so many grows at the same time. I keep an even temperature as much as I can throughout the entire crop. 19-22c atm that is. My drying room i can reach 10c at the moment. That will come up to 19c by April. (At this stage I should have my winter crop all dried) This is my last plant to start for this crop. I'm pushing it to the max this year. I've many plants. A few I plan to grow big. But 70% will be average grows which I'll be happy once they hit or go by 40g per plant. She has between 15-19% THC.. not normally a preference for myself. I like much stronger phenos. But, I had to give this strain a go. I'm getting round to the classics. As this is more or less what I grew up on as a teen. So, looking forward to tasting this baby. Edit After 30+hrs. Seed was placed on wet substrate that was soaked in 1L of Pure Zym.& Power Roots. After placing the seed i then added 0.1 of a liter of dry substrate on top of the seed. (Just moist soil) this will lower the risk of damping of completely nearly as this won't need watering for at least 10+ days. 1/5th of BatMix was added to the end of the pot with the rest been filled with Royal Mix, both are fertilised soil. But to get Alga Grow going as its an Organic product you should try get that going early. Just a small amount to kick-start the Organic process which takes longer while using Organic products. Pure zym & PR will help it break down any nutes as she's a seedling after all. So, I hope the soil won't be too hot. So, I'll hold off on any NPK feeds for now or anything else until she's into veg. Thanks to my sponsor MSNL and to all who work tiresomely to bring us fantastic strains. Also, to whomever drops by. I appreciate you. Drop a like so I can visit your diaries. Either way thanks for stopping by.
Likes
12
Share
Now we've reached day 41 Our Runtz is truly very very beautiful, aesthetically the most beautiful of all, truly and without a doubt. It has grown gracefully and regularly, the central top is swelling and the lateral ones have risen enough and are well aligned to give a great effect even in photography. Now fertilizers are necessary, we had that moment between veg and bloom of flush but when you want to do this thing you have to be very very careful to give the fertilizer for flowering at the right time otherwise you go from excess of fertilizer for veg to deficiency of fertilizer for bloom. For the rest your eyes can do everything very well, look to believe and remember the benefits of F1 Hybrids, you will forget about hermaphroditism if it doesn't seem like much to you ask the photoperiod growers what they are having fun in these periods. Site Description ZAMNESIA - RUNTZ F1 HYBRID AUTOMATIC: UNIFORMITY, RELIABILITY, AND GREAT FLAVOURS! What can we say about Runtz that hasn't already been said? Well, trust us when we say you've never seen it quite like this before! From the team at Zamnesia comes Runtz F1 Automatic. Now, this isn't some Formula One car-related special edition, no. This strain takes everything you know and love about the original Runtz and offers a reliable and uniform growing experience that will impress everyone. GROWING RUNTZ F1 HYBRID AUTOMATIC Runtz F1 Hybrid Automatic is the lovechild of Gelato and Zkittlez; the result is a strain that's extremely vigorous and fast to flower (taking just 10 weeks from germination to harvest). While autoflowers generally make for a no-hassle growing option, F1 hybrid seeds take this ethos one step further. Runtz F1 Automatic showcases great uniformity, meaning all plants will have a remarkably similar appearance and output. These plants are also highly resistant to pests and disease, so if it's your first foray into the world of cannabis cultivation, you're in the right hands with Runtz F1 Automatic. Reaching heights of 55–75cm, Runtz F1 Automatic can slot into the pokiest of grow spaces, both indoors and outdoors. But this small stature is not to the detriment of production. Once ready, growers will be treated to a return of around 500g/m² indoors and 100–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF RUNTZ F1 HYBRID AUTOMATIC Another perk of F1 hybrid genetics is that these plants are teaming with terpenes and cannabinoids, making for a pungent and potent experience you're unlikely to see with other strains. When it comes to delivering massive flavors, Runtz F1 Hybrid Automatic certainly doesn't phone it in. Upon taking that first toke, users open themselves up to bold notes of creamy vanilla mixed with candied citrus fruit. The result is mouth-watering. With 25% THC to its name, Runtz F1 Automatic offers an uplifting, euphoric, and creative high that will suit all kinds of scenarios, whether social or solo. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io
Likes
6
Share
Tip - Before every watering I ensure to leave the water rest for a minimum of 24-36hours to allow for chlorine dissipation.
Likes
13
Share
@DonKrika
Follow
This was the last week that I did defoliation on the plant. I defoliated very heavily the plant this week, I removed most of the fan leaves and a ton of small bud sites that would only generate popcorn buds. Unfortunately, the defoliation did not go as planned, I accidentally cut my trelluse net and remove one big branch by mistake, but the plant looked like it bounced back and is not showing any problems. This was also the last week that I gave mycorrhizal and applied foliar spray DAY 114 - Nutes PH - 5.83 PPM- 2830 Solution Temp - 18 Watering Volume - 4L Foliar PH - 6.29 PPM- 2270 Solution Temp - 20.5 Watering Volume - 200ml
Likes
1
Share
Hello everyone. The two Gorilla Glue X White Widow plants are on day 28 of flowering and looking great. Humidity is around 55 percent day, 50 at night. Temperatures are 27 to 28 Celsius in the day and 20 to 23 at night. I'm gradually increasing PK 13/14, now at 10 milliliters per 10 liters of water, aiming for 1.5 milliliters per liter. Everything's moving smoothly so far, and I'm excited to see how both develop. Thanks for stopping by and have a nice day. Best regards, Growfather.
Processing
Likes
7
Share
Финишная прямая началась. Несколько дней полив водой, далее 3-5 раз полив Рипеном, и еще раз вода. Запах просто бомба.
Likes
10
Share
Flowering day 42 since time change to 12/12 h . Hey guys :-) A lot happened this week :-). The buds develop really nicely . The scent wafts through the whole room when I open the tent 💚. This week was poured 3 times with 1 l each (nutrients see table above) This week there was the maximum amount of fertilizer, which will be slowly reduced from next week :-) . Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany