-Clones have been transplanted into 3.5" pots. The sixth plant eventually rooted however it was the smallest, was a backup, so I did not bother to transplant it. -Megacrop amounts above are actually g/gal, not tsp/gal. I do wish Grow Diaries would add mass for us dry soluble nutrient addicts. -Mother is doing fine, I took a second set of cuttings off her for a local buddy who would like to grow her out as well. -The mother has also given me a good idea of what to expect later on in veg when I begin training. -Grow will eventually be planted in 5-gal fabric pots then moved to a 4x4 tent w/ Autopots and a 650w 3000K LED Bars for further training and flowering. -I intend on offsetting the transplants, bending the girls over for LST, and eventually train under a scrog net in the flower tent. The mother seems to support this training as that is what I did with her to reduce height yet maximize the number of cuttings I could harvest quickly.

She is loaded right now very heavy and potent yielding plant oh yeah thanks 420 fastbuds I will be getting more of your seeds you rock Guys im so happy I boughy fastbuds seeds It was great to see this second seed pop an amazing grapefruit we did fiming and she eneded up with many colas and many flowers plus super frosty and smelly Also turned purple all buds which to us was a surprise and did not expect that Since last grapefruit was different than this Thanks a lot for all your support Imagine if we had a full spectrum light I think we would be growing trees Honestly we have more than we expected COMING from an Indoor thats nearly located in a tropical climate of 30/33 degrees most of the year and with that said raising temps very hot sometimes very humid thats close to the equator So we have to use A/C all times and maintain humidity levels by spraying all walls to keep it around 45/60% while ac is on remember droping temps so we have to make it as comfortable as possible and that its not easy in this side of the world OR either you need a lot of money which I dont have yet to build a super setup and a separate ROOM with all of that temp and great humidity lvls so yeah we do what we can with our budget We live somwhere where things are pretty much fckd up but it is what it is Hey at least we are safe because it is illegal lol so yeah brothers we have hard times And still with all risk we here doing our best Showing all support Showing im greatful TO find a space like this where We all can share like and Comment And help each other grow better everyday Blessings to you all Keep EM buds coming Happy growing

Poco a poco tomando mas fuerzas estas pequeñas en su segunda semana de vida,parametros controlados se espera una buena evolucion estas semanas siguientes!!

Casey's Rollex OG is still trying to get to the solution. She was the last one to sprout in the room, since the first seedwas a dud. Shecshoukd take off on growth, once she finds the solution. Nothing more to report at this time. Thank you DutchFem Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱🎤💓 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

My discovery of 2024. Amazing plant! Huge, smelly, kush-y colas! Super easy grow, zero grief and nugs the size of baseball bat - just WOW! Magnificent!

the girl looks healthy, she's not big, but she doesn't look bad at all :) it's very hot outside this week, 34° :)

9/8 starting to look frosty, starting to ever so slightly start looking more like buds. Switched to beastie bloomz. Shes the one plant barely affected by these high winds we have. Shes a short stocky ultra durable plant producing heavy resin so far 9/10 plants filling out nicely. I lollipopped some of the lower branches that werent really producing any buds at all. Should've done it like a month ago but oh well.

....

12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage

Here comes the first Preflower Update

Black Muffin Harvest Report The Black Muffin Monster really impressed me. She grew into a beautiful and strong plant with dense, resinous buds and an amazing aroma. Unfortunately, I suspect she developed a fungal infection, probably Fusarium, which forced me to remove about four side branches. Still, the rest of the plant stayed healthy and finished strong. Overall, I’m very happy with the results and excited to see how she turns out after drying and curing. It was a great experience despite the challenges.

Esta semana fue solamente de flush 🚿 en esta ocasión decidí usar florakleen para ver con cual obtengo mejor resultado si con este o con flawless finish, lo hice así, primero hice un lavado con pura agua con ph de 6.2 lo hice desde el ultimo día de la semana anterior, fue lavado doble, uno en cuanto se encendio la luz y otro justo antes de apagarse, luego empezando esta semana regué dos dias usando el florakleen y ph de 6.2, el tercer día no regué y al final de ese día le di corte ✂️ y la colgué, actualmente ya la tengo curando, la tuve 10 días secándose con una humedad de entre 50 y 60% para un secado lento.

Four are females, two males and another two I still don't know The males I've already cut out and I believe that this week I'll know the sex of all! xD

Lady’s are doing great even if the temp are really really high! Scare of powder mildiu and botritis I add a couple of more fan for more ventilation and oidio killer from agrobacteria. Today I’ll take out of the box the plant tiny plant

An diesem Grow will ich beobachten, was schlussendlich die bessere Methode ist (TOPPING , VS FIMMING) Alle 4 Pflanzen sind gut in die 3 Woche gekommen. 2 Pflanzen sind ein wenig kleiner geraten als die anderen beiden, deshalb habe ich die zwei kleineren Pflanzen in zwei 11 L Töpfe gepflanzt wo sie bis zum Ende bleiben. SONNTAG: Heute wurden die beiden größeren Ladys gefimmt, die zwei kleineren wurden getoppt. Eine von den größeren Ladys habe ein bisschen mehr gewellt. Die habe ich einwenig entlaubt da ich nach der zweiwöchigen Pause mit LST weiter machen will. Ich bin voller Hoffnung das alle meine Babys das Training heile überstehen, drückt die Daumen.😁 MONTAG:

Bonjour à tous les padawans et les maîtres jedis La semaine 4 va être décisive pour cette demoiselle car je vais pratiquer sur elle un main-lining et un LST Je précise que le main-lining n'est pas recommandé pour les autofloraisons car son cycle de vie prédéfinie ne lui permet pas de ce remettre pleinement. Cela aura forcément un impact sur son rendement, pour des raisons esthétiques et un espace de culture restreint je n'ai pas d'autre choix. Pour ce main-lining j'ai attendu le jour 24 et l'apparition du septième noeuds. Une fois le main-linning terminé je pratiquerai la technique du LST ce qui me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Vous pouvez voir une vidéo de mon main-lining qui détaille la manière dont je procède pour réaliser cette technique. Petit rappel et explications sur cette technique: Le main-lining a toujours été une technique très populaire parmi les cultivateurs, puisqu'avec des ajustements simples pendant la première étape de croissance, vous vous garantissez des récoltes plus que productives. Il s'agit de faire pousser la plante de façon verticale et symétrique afin de profiter au maximum de la lumière et de l'espace, des aspects très recherchés dans les cultures d'intérieur. En guidant les branches avec des cordes et une série de tailles initiales, vous établirez des patrons de croissances vigoureux pour vos plantes. COMMENT METTRE EN PLACE LE MAIN-LINING En partant de la graine, attendez que votre plante ait au moins développé 5 nœuds. Lorsqu’ils seront formés, taillez la plante au niveau du troisième nœud. Retirez tout ce qui s’est développé en dessous du troisième nœud(Moi j'enlève que le premier et garde le deuxième et troisième). Cela formera le Y ou le T initial que vous recherchez. Permettez à votre plante de se remettre de ce stress imposé durant quelques jours avant de passer à l’étape suivante. Votre plante comporte désormais deux pousses principales(ou 4 si vous gardez le deuxième noeud). Ces dernières devraient être attachées avec du fil ou de la ficelle(ou du fil de fer). Cela dirigera la croissance de manière horizontale. Faites bien attention en attachant les branches, ne les brisez surtout pas. Soyez doux. Une fois que la plante s’est un peu développée, vous vous retrouverez avec 4 tiges principales. Vous pourrez répéter ce processus autant de fois que vous le souhaiterez, accédant ainsi à de plus gros rendements. Rappelez-vous tout de même que plus vous répéterez ce processus, plus la période de croissance sera longue. Sauf pour les autofloraisons car étant donné le temps additionnel qu’il lui faut, le main-lining n’est pas compatible avec les variétés à autofloraison. Les autofloraisons ont des cycles de croissance très rapides, et d’ici à ce que la technique soit mise en place, la moitié de leur développement sera déjà passé. Cela pourrait potentiellement endommager les récoltes et cela influe sur le rendement Dès que vous aurez produit la quantité désirée de séparations, il ne sera plus qu’une question de temps avant que des têtes uniformes commencent à apparaître. Une légère défoliation régulière durant le cycle de croissance vous permettra également de vous assurer d’une distribution égale de la lumière, et empêchera votre plante de gâcher de l’énergie avec de grandes feuilles superflues. Retirez ces feuilles dès qu’elles commencent à prendre trop de place. Que la force soit avec vous 💪

Strong smell small plant

April, 5th We are coming to an End. The Triple G sits in 15l Smartpots filled with my Soilmix and amended with EASY BOOST ORGANIC NUTRITION from RQS Iam Watering them with Beneficals and Bloom Fertilisers from @GreenBuzzLiquids One Plant was already Harvested, the other ones coming soon Iam going to do a single Application with "Clean Fruits" and then Iam going on with Feeding them until Harvestday The Last Days ,Buds were maturating, Pistils turned more orange, and the smell......hmmmmmmmm i think 10-14 more Days #keep on Growing

had a lot of issues with my ph and overfeeding so i flushed her the last 2 weeks , overall im happy with the results. Not my best yield but it'll keep improving. She smells great citrus and lemon sense! 🙂