Likes
Comments
Share
WEEK #23 — THE FINAL COUNTDOWN Spoiler: Just moments before the axe. Slush Mint Cake has lost a few stems already during the week, great evening occupation. Im still not so sure about her. The blossoms and general impression looks totally ready imo, and some leaves even turned „necrotic“/crispy. The smell is heavy and nice, with a certain, kinda insane spiciness. But there are almost no amber colored trichomes. Like really just a few scattered ones. But all things must end. Worst case the result is not perfect, i guess, and will it even get better on the other hand with a few more days? Well, i have one seed left, so i can find out next time. 😎 Reasons for that could be plenty: the switch of fertilizer last minute and connected change of ph. And again, also might be because of the tacky LED-controller: i realised touching it the wrong way just resets it (fml). And how have i found out? Because the light was switched on way later as it was supposed to be. The solution then was to re-apply the „scene“ in the App and it magically works again. Manual timer switch has been ordered already. 0 points, dear Mars Hydro (maybe it's bad luck and incompetence from my side, take it with a grain of salt). And that's — i guess — also the reason (spoiler) why i found some bananas in the Bottom half of Skywalker Haze. And i surely do not blame the genetic for that (at all). Hmpf 💩. Well, still lucky this happened right before the showdown, so it want matter all that much, i suppose. Back to Business: SMC very, very pretty. Rich and loaded all over, pictures speak for themselves i think (have a look at last entry as well, please). For Skywalker: clear visible Amber trichomes, especially on the top buds. White ones not so easy to distinguish from the clear ones (at least for me) The outer most tips of the leaves turned light, so another sign of the advanced state of the plant. I Like. Some cute pink tips as well. Similar to SMC rather small buds, but hey, if qualityquantity thats Fine for me. 🤩 Also a very pretty plant, with a more classic look, dense, a slightly more proportion of leaves. Smell? Yes its true: lemony-herby all oover, in a way also spicy Rich (lemon Pepper). In fact both plants have been harvested, for Skywalker mainly the top Part, as the bottom buds were light and soft. As i have mentioned before, probably should have removed them After Stretch, but: All buds are equal, the deserve it. Let's see what will happen. So far: Bravo Dutch Passion for both These extraordinary strains, looking forward to the final results and the effect of both. See you in about 3-4 weeks with the "harvest" posts, peace! 🙏
Processing
Likes
28
Share
@Salgeezi
Follow
Kinda worried the buds are showing lots of cloudy trichromes and on sugar leaves I am seeing amber. Bud Structure and the way they are still taking their feedings are telling me otherwise. So Im guna keep on trucking. My grows flowering times are never what breeder says too, always longer. Forgot to mention at the start of week 5 I added full tilt by floraflex aswell. Also started watering 8x a day with lights on. One time at lights off. At about 160ml each feeding with about 40-50ml runoff. These small pots are all roots and I feel the high frequency waterings are necessary to keep the runoff EC levels down Wattage 170 EC 700 Humidity 58 Temp 78
Likes
4
Share
Que pasa familia, vamos con la sexta semana de floración de estas Kiwi x Papaya feminizadas de Mavericks . Vamos al lío ,se trasplantaron en macetas de 7 litros definitivamente. El ph se controla en 6.0 , la temperatura la tenemos entre 24/20 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 100% de potencia. De momento van creciendo a buen ritmo y tienen un buen color. La flor está cogiendo forma y ya empezó a tricomar. Gracias a Agrobeta de nuevo por el kit para esta temporada, unos grandes 🙌. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨
Likes
10
Share
Half way through the week of germination the seedling started to grow horizontally, removed humidity tent, turned off the heating pad, and built up the soil around her base. Plant seems to be doing fine now. Join my discord here: https://discord.gg/bhBQRmSzJ3 Feeding 8/16/21 Had to PH via drop tester as digital meter broke. PPM742 69F
Likes
8
Share
Ci sono più di trenta gradi di temperatura ormai e la notte la temperatura non è più fresca. Poco da dire su queste varietà impeccabili e bellissime e molto abbondanti. Ogni varietà autofiorente della dutchfemseeds è una vera soddisfazione, continuano a riempirsi tutte di infiorescenze appiccicose e profumate e alcune colorate. Continuano a produrre resina e le infiorescenze si stanno gonfiando e indurendo molto. Alcune superano il metro e cinquanta centimetri di altezza, la maggioranza sono più di un metro e molto diramate e piene di infiorescenze. Se continuano così tra un paio di settimane iniziamo a raccogliere le più mature! Resistono molto agli afidi infatti sono meno presenti visto che la resina appiccicosa inizia a dare fastidio a tutti i parassiti quindi è un bene! Un abbraccio a tutti forza Dutchfem
Processing
Likes
35
Share
Stretch 8 centimètres Jour49 arrosage Jour52 defolliation et arrosage avec 2 litres d'eau ph6.3 Jour54 defolliation
Likes
3
Share
@CalGonJim
Follow
4/7 9:30AM A little PH drift, too high EC not bad. They are doing great, flowers and resin at about 80 watts almost no heat!!! 4/8 5:42 AM all the plants are looking OK. I’m gonna do some watering today so I did a watering can animated video. When wizards water 4/9 3PM Did a lot of runoff to get the ph and EC back to normal after drifting. Should be at 1.1 ish
Likes
Comments
Share
10/07: Aktuell ist es ein Selbstläufer. Gegossen wird ausschließlich mit Wasser. Ein bis zwei mal in der Woche, lege ich ein paar Eiswürfel auf den Mulch, um das purplen etwas zu triggern.
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/29- Here we go into Week 4 of flower for the FastBuds Strawberry Gorilla's and I wish I could say they are looking epic, but that's not the case. The #2 plant continues to be ahead of the other two, and is really frosting up nicely. The #2 and #3 plants look pretty crappy, and after examining some other plants in the tent I've got a good idea of the issue. The fabric pots that the plants are in are supposed to 'air prune' the roots, preventing them from growing outside of the pot, and instead growing a large mass inside of the pot. I pulled one of the pots from its bucket and it was disgusting, with rotting clumps of roots in the bottom of the bucket along with some nasty looking brown slime. The fabric pot also had roots growing out of it, along with that brown slime across the bottom of the pot...ugh! 12/1- Tomorrow I'll be doing another drain/clean/fill of the reservoir, after which I'll add Plagron Cocos 'A' & 'B' along with Green Sensation and Royal Rush. After adding the nutrients I'll ph the solution to 5.6-5.8 @ 70℉. 12/3- Yesterday I did the drain/fill and continue to have the Plagron nutrient level at 800ppm. The #3 plant continues to struggle, but nevertheless is flowering away and actually has pretty decent trichome production, which I wonder if the stress she's experiencing has an affect on either positively or negatively. 12/5- There is four weeks of flowering for the Strawberry Gorilla's. Although they sure could look a whole lot better, they for sure could look way worse. Hopefully, they'll start to look a bit better in the upcoming weeks... fingers crossed! 😎🤞 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
1
Share
@BiggaB
Follow
Plant freshly cropped smells very gassy, big trichomes I will post the harvest once dried✌️
Likes
4
Share
I would’ve had a better stretch on the plants for flower if I would’ve took the lay clips off when I should’ve I’m gonna do another run
Likes
2
Share
Well I configured my tent to run two 750s in air cooled hoods I have some impressive airflow using air mover fans I bought off of a hard ware store as you seen in my other video the light set up.
Processing
Likes
42
Share
Hey everyone 😃. Another wonderful week is over and they are developing really well 👍😃. I think I'll put them in the flower chamber for about the next 2 weeks. until then I wish you all the best 😋 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
Comments
Share
@acidblue
Follow
OMG, so much has happened since my last post, this is way overdue. My soil went totally hydrophobic, my PH pen was outta calibration so my soil ph was way of, combined with another gnat infestation. Things are much better know. the gnats are gone, transplanted into larger pots with newly bought soil, changed lighting to 18/6, vegged for a couple more weeks . One plant showed full male pollen sacs and one had suspicious looking male pre-flowers so I culled both. The last 2 showed what I think look like female pre-flowers. I just flipped lights to 12/12 on 4/4 so hopefully I have 2 females, started weaving thru scrog net, canopy looks fairly even, plants due look super healthy aside from couple tips have a bit of yellow But thats from early veg when I had the lights a tad too close. Wish me luck ;).
Likes
3
Share
@Morkiyer
Follow
Growth is a little slower. This spring was much colder than the last few years. I hope they still have time to sprout.. Nice week.
Likes
2
Share
@youdan
Follow
Non ci sono parole, la ciliegia og è sempre piu marcata ed io sono veramnete felice per questo cilo, e alta 1.70 e di tutte cime impilate della stessa grandezza da giu a sù
Likes
26
Share
Stopped using fish it. Started using mammoth p. .6 ml per 1 gallon in all gallons every water. Thats all im using. I put the roi-680 on 100% its about 16 inches above and i put the diablo at 70% and thats about 22 inches above