🍬🍨🍧🍦

On the 5-6 day of the sprout, I gave a small illumination with philips UV lamps - a mini solarium for the face (140w like), literally 5-7 minutes no more

Nitrogen and Phosphorus are crucial elements on the phase of active vegetation. You can see the difference in the grow dynamics if you look at week 2-3 and 4. On week 4 I increased nutrients concentration by 40%.

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush

Day 77) 12/9 End of another week. Phone is fixed and pics are back. Day 74,75,76 there were no pics due to f'ked up phone but day 77 now has pics. This girl is doing well and still growing taller but I can tell she's at the end of her stretch. Flowers are smelling very sweet like berry and a hint of pine and candy and just sticky as hell. Buds are elongating up and down the stem with a nice 12-15 inch length but buds are forming and fattening slowly, could be the sativa side of her. Still drinking a gallon a water 💦 a day with nutes. Daily temps and humidity fluctuations may be a cause of slow bud growth and it may be my fault for trying too hard to keep environment inside tent and outside tent to the exact same but in reality according to natural science and popular findings it's evident that a swing in these conditions of not much more than 10 degrees/percent is expected between light and dark (silly me!) So I will let nature take its course but will be very watchful. Hope u all are still watching and taking a peek now and again. Happy Growing and Happy Harvesting

As you can see the white powdery mold is starting to lose my thoughts were getting a HEPA filter into the room . 2) because this mold mostly lives on leaves what I did is I locked out the soil. This was a technique passed on by a legacy grower in my area.The way it was explained is by making the pH higher than seven the plant would no longer be able to receive nutrients through the soil and it would have to eat whatever nutrients are left in the leaves. This woukd change the pH of the leaves aswell to help kill the mold . Lastly I greatly increased my wind movement so that air would be continuously moving no matter what it was a little bit hard on the leave tips that burnt a little bit but at this point windburn on leaves is pretty irrelevant when you're looking at the whole picture. I don't think this would have worked with any other genetics but exotic seeds mostly because from what I've seen with them is a very high resistance to mold and I think that played a huge part of the process. Also having diablo nutrients monster wash, without that I do not think I would have won this battle

So, with the harvest complete and the dry finished, the rest is now going into jars for the final cure and storage. Overall I enjoyed this grow, it needed minimal interventions and had a smaller work load compared to the other grows. The amount of dried flowers is 752g (1.11gpw) so a decent haul, I threw a lot of B grade buds in the hash bag due to the large number of low level flowering sites (I need to rethink my canopy management) and also with the lack of stretch after flipping made the internodal spacing a bit too tight. Managed to extract 215g of grade a hash from her as well which I have pressed into a slab (pictures). I learned many things along the way, namely root health and the importance of keeping organic additions as low as possible. I also decided to try out clones for my next run, just to get a little more canopy and growth consistency - those of which are in an aeroponics tub at the moment waiting to root (picture). Thanks for those of you who followed along most of the way, good luck with all your grows!

Ok so had a bit of a bad week ph was way out causing problems at 6.4 so had to flush and get ph back to 5.8 also had big problems with high humidity like 80 90 % even when lights are off so I've decided I've upgraded to a 2.0 x 2.4 x 1.2 so hoping the more space and also upgrading to the black orchid 6 inch fan n filter along with the 4 inch fan and carbon filters plus clip on fans but big things to come I've also purchased a 4 pot auto pot system for the next grow so keep eye out guys

I'm pretty satisfied with these Og Kush Auto's so far! Responding very well to my home brew. All my organic teas throughout grow. Watch it take off... to the mooooon! My ultimate goal for this cabinet grow is a Quarter lb. Do you think i can do it with these Fastbuds? What strains to you guys recommend to achieve this goal? 🌲💨🙏✌️

Penso diventerà enorme come la sorella !!! Divineseeds best auto!!!!

2020-08-11 Another week gone by... Plant 01 is still fattening up, drinking normally. Plant 02 has been completely choked out of the lights so it's not doing very well. Keeping the nutrients the same as they are both pretty steadily drinking. Some death amongst the lower leaves on plant 02 and the buds are getting trichomes but not getting very fat. Plant 01 is very dense and sticky af. Excited to harvest in a couple weeks! The tent is definitely ugly as hell and the vegetative state clearly went on for about 2 weeks too long (first time grower) while I messed up the nutrients and other things that caused them to grow slowly. The 2nd plant never really recovered. I have continued defoliating and super-cropping plant 01 away from the light and keeping the distances even... It's an ugly canopy, can't wait for the next one so I can get it right!!

Both seeds looking good after 48h in wet cotton.

🌸 Blütetag 59 / 📅 Gesamttag 119 🌡️ Klima Draußen merkt man inzwischen deutlich, dass Frühling ist. Im Zelt läuft das Klima weiterhin ruhig und stabil und die VPD-Werte bewegen sich konstant im grünen Bereich. Insgesamt also sehr ähnliche Bedingungen wie in der letzten Woche. 🌱 Pflanzenstatus Die Ziellinie kommt langsam in Sicht, auch wenn noch ein kleines Stück Strecke vor uns liegt. Die beiden Pflanzen zeigen inzwischen deutlich unterschiedliche Reifestadien. Die Triangle Sherbet Kush wirkt schon ziemlich weit: kaum noch neue weiße Härchen, stark angeschwollene Buds und insgesamt deutlich mehr Harzproduktion. Die White Gushers 33 arbeitet dagegen weiter an neuen Blüten. Besonders an den Tops sind noch frische Pistillen zu sehen und die Buds legen weiter an Masse zu. Interessant ist auch die Entwicklung innerhalb der Pflanze: Die drei höchsten und kräftigsten Triebe foxtailen leicht, während einige der tieferen Seitentriebe bereits weiter wirken und teilweise deutlich weniger weiße Härchen zeigen. 🌼 Blütenentwicklung / Reife Bei der Triangle Sherbet Kush zeigen sich inzwischen klare Reifezeichen. Unter dem Mikroskop sind bereits die ersten bernsteinfarbenen Trichome zu erkennen 🔬. Außerdem stehen einige Blätter bereits kanuartig nach oben, und die Pflanze beginnt sichtbar, Nährstoffe und Farbe aus den Blättern in die Blüten zu ziehen. Die White Gushers 33 verfärbt sich ebenfalls zunehmend, wirkt aber insgesamt noch etwas später im Reifeprozess. Hier sind die Trichome überwiegend milchig, teilweise noch nicht ganz trüb. 👃 Aroma Beim Öffnen des Zeltes entwickelt sich inzwischen eine schöne würzig-fruchtige Gesamtmelange. Die Triangle Sherbet Kush bringt zunächst klar die würzige Kush-Komponente mit. Wenn man die Buds leicht berührt, kommt aber deutlich die bananige Note 🍌 aus der Sherbet-Abstammung durch – also ebenfalls fruchtig, aber eher cremig-bananig als süß. Die White Gushers 33 geht aromatisch eher in eine gasigere Richtung ⛽, mit etwas Funk und Frucht darunter. Also keine Candy-Süße, sondern eher ein Mix aus Gas, leichter Frucht und einem kleinen funky Twist. 📊 Fazit Aktuell zeigt sich immer deutlicher, wie unterschiedlich sich die beiden Genetiken in der Endphase entwickeln. Die Triangle Sherbet Kush wirkt klar weiter und reifer, während die White Gushers 33 oben noch weiter Blüten nachschiebt, in den tieferen Bereichen aber teilweise schon erstaunlich weit ist. 🔭 Ausblick Rein vom Eindruck her könnte die Triangle Sherbet Kush bald fallen, während die White Gushers 33 vermutlich noch etwas mehr Zeit gebrauchen kann. Da eine Teilernte hier nicht ganz unkompliziert wäre, bekommen beide vorerst noch etwas Zeit. Mich würde aber interessieren, wie ihr das handhaben würdet: Würdet ihr in so einer Situation schon separat die Kush ernten oder beide Pflanzen noch zusammen stehen lassen? Und wie macht ihr das generell in der letzten Phase vor der Ernte – gebt ihr euren Pflanzen noch eine Trockenphase 🌵 oder Dunkelphase 🌑, oder lasst ihr alles einfach normal weiterlaufen? Auch spannend: Zu welcher Tageszeit erntet ihr am liebsten? ⏰ Bis nächste Woche – bleibt sauber und gesund! 🌿 🌸 Flower Day 59 / 📅 Day 119 Overall 🌡️ Climate Outside you can clearly feel that spring has arrived. Inside the tent the climate remains calm and stable and the VPD values stay consistently in the optimal range. Overall the conditions are very similar to last week. 🌱 Plant Status The finish line is slowly coming into view, even though there is still a little bit of track left. The two plants now clearly show different stages of maturity. The Triangle Sherbet Kush already looks quite far along: almost no new white pistils, heavily swollen buds and overall a lot more resin production. The White Gushers 33 on the other hand is still working on producing new flowers. Especially on the tops fresh pistils are still appearing and the buds continue to gain mass. An interesting observation inside the plant structure: The three tallest and strongest tops are slightly foxtailing, while some of the lower side branches actually seem further along and already show far fewer white pistils. 🌼 Flower Development / Ripeness The Triangle Sherbet Kush already shows clear signs of maturity. Under the microscope the first amber trichomes can already be spotted 🔬. Some leaves are also starting to canoe upwards, and the plant visibly begins to pull nutrients and color from the leaves into the buds. The White Gushers 33 is also starting to fade, but overall it still seems slightly behind in the ripening process. Here the trichomes are mostly milky, with a few still not fully cloudy yet. 👃 Aroma When opening the tent a nice spicy–fruity blend fills the air. The Triangle Sherbet Kush first presents a spicy kush profile, but when the buds are lightly touched a distinct banana note 🍌 from the Sherbet lineage becomes noticeable — fruity as well, but more creamy banana-like than sweet. The White Gushers 33 goes into a different direction aromatically. It leans more toward a gassy profile ⛽, with some funk and fruit underneath. So not candy sweet, but more a mix of gas, light fruit and a slight funky twist. 📊 Summary At this point it becomes increasingly clear how differently the two genetics behave in the final phase. The Triangle Sherbet Kush clearly appears more mature already, while the White Gushers 33 is still pushing new flowers on the tops, even though some lower parts already look surprisingly advanced. 🔭 Outlook From the current impression the Triangle Sherbet Kush might be ready quite soon, while the White Gushers 33 could probably use a bit more time. Since doing a partial harvest here would not be the easiest option, both plants will likely stay a little longer for now. I’d be curious how you guys would handle this situation: Would you already harvest the Kush separately, or leave both plants a bit longer and harvest them together? Also interested to hear how you approach the final phase before harvest. Do you give your plants a dry period 🌵 or a dark period 🌑, or do you simply let everything run normally until harvest? And one more thing that always comes up in discussions: what time of day do you prefer to harvest? ⏰ See you next week — stay safe and healthy! 🌿

These one was a big messy jorney, everything happened from almost kinling them, to almost no space for them to grow, LED broken middle flower and still perform like the queen champion she is!!! I am felling her mature over cycles , i am thinking of her like a wine vine that gets better over time , these one in my humble opinion its a must in everyones garden <3 <3 <3 Wen harvesting these one i felt the need to break it all apart to prevent bud raw or anything we do not want on our medicine, i like to hang them all and let them dry but in these case there was no chance i was taking that big of a risk with these big fruits all over the place, what a blessed run, my rack is completely full, there was no more space , i mean no more space at all hahah amazing , thank you thank you thank you <3 <3 <3 As always thank you guys for your love , your time, your support and it all, i fell blessed and i am truly thankful <3 <3 <3 All info and full product details can be find in can find @

 https://www.zamnesia.com
 https://aptus-holland.com 

#aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #zamnesiaseeds #growerslove

With true love comes happiness <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 

 More info and updates @ 
https://growdiaries.com/grower/dogdoctor

 https://instagram.com/dogdoctorofficial

 https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg

 <3 <3 <3 Growers love to you all <3 <3 <3

This week they were ready for harvest. one went into a drying rack the other was hung upside down to dry

It's week four of flower, and my humidifier is busted. I can't afford to replace it right now so she's stressing. And by she I mean the two clones and then I popped the mom in the same pot due to space constraints. They seem to be doing well despite the dead of winter in Michigan humidity.

Day 57-17/12/21 oh dear I don’t know what is going on after giving them some calmag they seem to being doing better day 61-21/12/21 some are behind others but should be taken a few down next week!!!

Days 50 - 56 Last week, I had a major lockout issue with my plants, so I’ve started monitoring both the irrigation and runoff water closely. I had to do three rounds of flushing, but after that, my lady started to recover, which was a relief! Since I'm going on vacation for the next 10 days, I’ve been working on setting up an autonomous irrigation system, which I successfully implemented and built yesterday. It uses three 12V water pumps controller by Arduino Uno via H-Bridge motor drivers, each dedicated to one plant. The system runs from 9 a.m. to 11 p.m., delivering around 250 mL of water per plant per session. This means each plant will get approximately 2.5 liters of water per day. I’ve mixed all the nutrients in advance. I know the ideal scenario would be to add the fertilizers just before each irrigation session, but unfortunately, that’s not possible. Still, it’s better than nothing. The system has been running smoothly since this morning, and so far, the cycle works fine. I’ll improve it further when I get back from vacation. To prevent any future lockout issues, I’ve extended the irrigation cycles throughout the day to ensure the coco stays consistently moist.