Likes
Comments
Share
Servus Moin! Die MDC Fern Type #3 ist die kleinste von den beiden Farnen. Sie hat auch sehr verdrehte Blätter, dafür geringeren Nodienabstand. Ich habe die 2 oberen Triebe für die unteren zur Seite gestützt.
Likes
44
Share
I’m actually Super happy they sprouted on the 1st it just makes keeping track of what day your on so much smoother l think, but I think one was having a hard time getting the shell Off so I helped just I tiny bit!
Likes
9
Share
🌴WEEK 6 DAY 1 VEG🌴 As you can see after defolitating some leaves to expose lower shoots to light worked out perfectly as she back with a full canopy and most lower shoots have had chance to reach the same hieght as others along with some lst & tucking with her rapidly growing new shoots and leaves tells me shes happy but i am seing a few of symptoms allong the way which i have posted (images) below I find these odd rust looking brown marks on my plant i also had found 1 leaf that looked asif it had been eaten at with this browning close by, i belive it is not pest as i have tried to inspect as best as i can and i do not see anything but i havent checked with microscope :( but im sure its not pest related another thing along my journey that hasnt been exactly how i expected is run off, im week 6 day 1 shes growing fast and seems happy im giving 3L of water at 608ppms with a ph of 5.5 allowing the coco to slightly dry before watering again when i check my run off ppms its way lower today i gave 608ppms it came out at 180ppms WTF :( if anyone read this far if you know your stuff could you possibly help me out take a look at my photos/videos and let me know what you think of my plant.. is she looking healthy.? do you know what these small problems could be? thankyou, Lets Grow!
Likes
8
Share
I am finding it difficult to get my camera to take photos and videos with the proper colour hence the double videos! It is unreal how thicc these are getting!! They smell wonderful! The other two plants are starting to show a bit more of their red/purple colours too! Noticing a bit of potassium stress from feeding but since they are nearly finished (I STILL CANNOT BELIEVE THAT!) I am only going to pull back a bit. They just need to survive another 14-21 days by the looks of them!
Likes
12
Share
Loving watching them grow 😍 i lollipopped gigabud so she is a little late to start flowering. But she’ll catch up hopefully this week
Likes
9
Share
I’m super excited to grow Purple Haze. It’s been on my wishlist a long time.
Likes
Comments
Share
After three weeks in the solo cups I transplanted to 1 gallon pots and three days later I noticed yellowing on one of the plants so in 16oz of water I mixed in 1/4 tsp of Epsom salt and gave it to both plants in fear of magnesium deficiency but the other plant is thriving and growing strong. YouTube video:
Likes
31
Share
Hey! At last the day of the harvest arrived. Before that, I stopped watering the plant 4 days ago, and turned off the lights 2 days ago. As for questionable techniques, I adhere to the principle - if it doesn’t get worse, why not try?😄 So, I put the harvested crop in a dark ventilated box, for about 10 days, I will observe. p.s. I invite everyone to the next update of the diary - I will sum up, remember the interesting moments of the cycle, and of course I will try the finished product, see you! 😍 Glory to Ukraine! 🇺🇦
Likes
9
Share
@Krissci
Follow
Day 1 - LST train both plants... Mostly SB1 to have a wider canopy let the smaller nodes catch up. SB2.. Nice structure, really upset to break 1/2 of it... But loads of energy and recovered /train well. Nodes larger than SB1, but SB1 has mode nodes
Likes
21
Share
🌸 Week 11 – Gorilla Cookies Auto Pheno Hunt Another week is in the books, and now all the phenos have officially entered the bulking phase. 🔥🌸 The flowers are swelling rapidly, and it's amazing to see how differently each phenotype is stacking and filling out. Every week brings more weight, stronger aromas, and denser buds. 📈 Current observations: All phenos are now focusing entirely on bulking up their flowers. Pheno #1 and #2 are producing massive buds, with some already reaching the size of soft drink cans. 🥤🔥 Pheno #6 has made incredible progress over the last two weeks. Although it had the slowest start, it has developed beautifully and is building flowers surprisingly well. It will most likely need around two extra weeks after the others and will probably finish the grow on its own. Pheno #3 unfortunately never fully recovered after I had to remove several main colas because they were growing into the SANlight fixture. While it's still producing nice flowers, it clearly lost some of its potential. Pheno #4 continues to be my personal favorite. The aroma is absolutely incredible, with a sweet Kush profile, and the buds are becoming rock hard already. 💎 📊 Current environment: Temperature: 31°C Relative Humidity: 63% VPD: ~1.66 kPa SANlight fixture at maximum height Light intensity: 90% ⏳ Looking ahead: If everything continues as expected, I think the first phenos will be ready for harvest in about two weeks. The final stage is always my favorite—watching the buds swell even more, the trichomes mature, and the terpene profiles reach their peak. I'm excited to see which phenotype finishes on top, but right now Pheno #4 is definitely leading the pack. 👑🔥 💬 Which pheno would you harvest first based on these updates?
Likes
13
Share
June 6: cool and rainy today. Bigger one is tall enough to tie down so I did. Used a piece of wire to hold apical tip below the other growth tips. Will do this for about week and will release once the lower sites are bigger and apical dominance has been broken. June 8: adjust tie down but a couple hours later I noticed the stem had shifted and folded. Patched this unintended supercropping using green floral tape which you can barely see on the stem. Floral tape is great and readily available at florists at the local mall. Breathable, flexible, very helpful for this kind of thing.
Likes
11
Share
*english version below* 🌿 HydroLab Germany – Vegiwoche 6: Zucker, Pilze & Präzisionswahnsinn Willkommen zurück im HydroLab, wo Wissenschaft und Wahnsinn weiter Hand in Hand tanzen – diesmal mit einem ordentlichen Schuss Zucker im System. 🍭⚗️ Projektstatus Die Damen machen sich weiter breit – Training läuft präzise nach Plan. Das Scrog-Netz wird nach und nach gefüllt, Triebe werden durchgeflochten und Blätter geopfert. Untenrum wurde ordentlich lollipopped – klinisch sauber, wie man’s im Labor mag. Neue Seitentriebe wachsen nach und werden sofort wieder ins Netz eingearbeitet – kontrolliertes Chaos in Reinform. ⚙️ Systemparameter 🌡️ Temperatur (Tag): 26 °C 💧 RLF: 65 % (geregelt über AC Infinity Cloudforge) ⚗️ Düngung: Advanced Nutrients pH Perfect (Grow, Bloom, Micro + B52 + Bud Candy) 📊 EC: 1,1 System: RDWC (4 × 30 L Euroboxen, DIY – weil zu groß gibt’s nicht) 🌊 Wasser: kühl, klar, quirlig – und jetzt offiziell lebendig Living RDWC Experiment Das Labor wird biologisch aktiv – Mykorrhiza, Zuckerquellen wie Bud Candy und bald Aloe Vera Saft & Chitosan sollen das Mikroleben pushen. Ziel: Den typischen „sterilen Hydro-Geschmack“ zähmen und mehr organische Tiefe schaffen. Kurz gesagt: Wir impfen das System mit Leben – und hoffen, dass es uns nicht auffrisst. 😄 🔍 Beobachtung Die Pflanzen zeigen kräftige Stämme, saubere Wurzeln und gleichmäßiges Wachstum. Das Netz wird von Tag zu Tag dichter – fast so, als hätte es einen eigenen Willen. Einige große Fächerblätter mussten für den Fortschritt sterben… aber hey, Wissenschaft verlangt Opfer. 🧠 Labornotiz Im HydroLab riecht’s mittlerweile nach Zuckerwatte trifft Nährlösung – ein Duft, der Erfolg verspricht. Alles deutet darauf hin, dass Leben im Wasser = Geschmack im Weed heißen könnte. Phase 6 läuft stabil – aber Stabilität ist hier ohnehin nur die Ruhe vor dem nächsten Versuch. ------------------------------------ 🌿 HydroLab Germany – Veg Week 6: Sugar, Fungi & Precision Madness Welcome back to the HydroLab, where science and insanity continue their delicate dance – this time with a healthy dose of sugar in the system. 🍭⚗️ Project Status The ladies are spreading beautifully – horizontal expansion: successful. The Scrog net is being woven tight, trichome soldiers in training, leaves removed for maximum efficiency. Below the net it’s now clinically clean – lollipopping complete. New shoots keep popping up, and every single one gets trained into position – controlled chaos at its finest. ⚙️ System Parameters 🌡️ Day Temp: 26 °C 💧 RH: 65% – perfectly managed by AC Infinity Cloudforge ⚗️ Nutrients: Advanced Nutrients pH Perfect (Grow, Bloom, Micro + B52 + Bud Candy) 📊 EC: 1.1 System: RDWC (4 × 30L Euroboxes – DIY, because “too big” isn’t a thing) 🌊 Water: cool, clear, and officially alive Living RDWC Experiment This round, the Lab goes biologically active – Mycorrhiza, sugar sources like Bud Candy, and soon Aloe Vera juice and Chitosan join the mix. Goal: erase that “sterile hydro” flavor and bring organic depth to hydro-grown weed. In short: we’ve inoculated the system… and we just hope it stays friendly. 😄 🔍 Observations Strong stems, glowing white roots, uniform growth. The canopy is tightening up – like a neural network learning how to photosynthesize better. Some big fan leaves were sacrificed in the name of progress – science demands casualties. 🧠 Lab Notes The HydroLab now smells like nutrient solution and cotton candy – oddly promising. Early signs suggest the theory holds: life in the system = flavor in the flower. Phase 6 is stable… but in this Lab, stable only ever means “right before the next experiment.” 🔖 Tags:#HydroLab #RDWC #LivingRDWC #Scrog #AdvancedNutrients #BudCandy #ACInfinity #CannaScience #HydroExperiment #GrowTech #THCGrow #ScienceIsSexy #MycoPower
Likes
10
Share
Have some problem with bud leafs. It's looks like potassium def or maybe nut overdosing. My PPM meter was not accurate and I switched to another one. The old one showed 100 PPM less. Thats why I gave 800 PPM instead of 700 PPM
Likes
16
Share
@Wakesk8
Follow
The clone looks nice, I have some issue ( in my opinion ) with cal mag but balance is great 👍 Any suggestions??
Likes
10
Share
@SgtDoofy
Follow
3/21: That last quarter-strength nutrient feeding seems to have taken well. Amnesia is bulking up slowly, and isn't letting go of as many dead leaves today. I am removing any crispy leaves I can find from Trainwreck as well. She isn't letting go of any leaves like Amnesia is, they're just ugly as sin. Oh well, they're doing their job. I am keeping the humidity to match the current temperature according to the VPD charts, like every week, so I haven't been lowering the humidity over time because of the heat in the tent. 3/22: Leaves are looking greener today. Just keeping an eye out for any loose leaves ready to be removed from either plant. Not many so far today.
Likes
10
Share
Made itnto the main part everyone wants to get to... chop day. Wish i had a scale to get a wet weight but for the next harvest of the closet ill have a scale big enough.. loves growing these strains pretty deficiency resistant. Gave them 48hr dark period to see if i can notice a difference. Any questions feel free to ask.
Likes
31
Share
@Reaper
Follow
So week 8 flowering, the plant in the back starts to get purple tints (night temperature drops to 12celcius. trichomes on both plants are cloudy (on top) at bottom they have clears left so i go another week and well see what happens. i give only tap water now dont mind the butterfree hes protecting my buds from sneeky neighbours
Likes
8
Share
@jaydee702
Follow
bubba cheese cake is growing will she is looking sweet in her natural state un topped or LST even going to flower early doesnt give me time enouph to get to harvesr hoping the deadline is for entering and not completing so i can compete in the contests without comming up short of harvesr wich is still close to 60 days yet.(crossing fingers). bubba cheese cake is an awsome strain to grow so far.
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 6 - Bolt 3 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Week’s Objectives - Auto-Fertigation Installed and operational - Twice/Day, 440 ml/ Day (Initial Rate) - 220 ml/Event Weeks Observations - We have a smattering of pistils showing - looks like pre-flowers with Haze morphology - Confirms (for me) the known property of Haze - that 7+ weeks of veg (from seed) is required BEFORE the plants can initiate flowering. (Noting that CUTS will be ready to flower @ Flip. Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ __ Fri Apr 11, 2025 TH 1Q25 22:F:3:1 EC: 1.8 LightDistance: [ 20.5, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ 640, µMol/m2/s] - [x] TM-7: [ 0.125, g] # Prep - [x] Fertigation: [8.5:8.5:3.4:3.4:3.4:0:3.4] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 0.5, gm] # Once or Twice/Week - [x] TM-7 (µNutrients): [ 0.125, g] __ Sat Apr 12, 2025 TH 1Q25 23:F:3:2 LightDistance: [ 18, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ 703, µMol/m2/s] LightDimmer: [ 85, %] We’re bringing up Intensity SLOWLY, as the plants adapt. Allowing the plants to grow INTO the LightField and naturally raise PPFD as it does. - [x] TM-7: [ 0.125, g] # Prep - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 0.5, gm] # Once or Twice/Week - [x] TM-7 (µNutrients): [ 0.125, g] __ Sun Apr 13, 2025 TH 1Q25 24:F:3:3 LightDistance: [ tbd, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ tbd, µMol/m2/s] LightDimmer: [ 85, %] - [x] TM-7: [ 0.125, g] # Prep dilution in 250 ml plain water - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0.0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] TM-7: [ 0.125, g] # Delivered - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] __ Mon Apr 14, 2025 TH 1Q25 25:F:3:4 LightDistance: [ tbd, in] # We’re in STRETCH, ~1.5”/day! EC: [ 1.9, mS/cm] - [x] TM-7: [ 0.125, g] # Prep dilution in 250 ml plain water - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0.0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 1, tsp] # Once or Twice/Week __ Tue Apr 15, 2025 TH 1Q25 26:F:3:5 EC: [ 1.8, mS/cm] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [8.7:8.7:3.5:3.5:3.5:0.0:3.5:0.0] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] Terps Plus: [ 2, ml] - [x] PCAL 1660: [ 1, tsp] # Once or Twice/Week __ Wed Apr 16, 2025 TH 1Q25 27:F:3:6 Stretched another 1.5” Main Canopy @ 740 (PPFD) Fertigation 1L/Plant/Day - 2 x 500 ml, 6 hour freq LightDistance: [ 17, “] LightIntensity: [ 740, µMol/m2/s] EC: [ 1.8, mS/cm] 
Fertigation Amount: [ 2.0, gal] # We’re a little low at a gallon/day … Light Intensity: [ 750, µMol/m2/s] # Adjust Light Height to Achieve. Light Dimmer: [ 100, %] # Photone is ok, but I think reads low . . . # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [17.5:17.5:7.0:7.0:7.0:0.0:7.0:0.0] # [ 10, 4, 4] - [x] Photosynthesis Plus: [ 12, ml] - [x] Terps Plus: [ 2, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 2, tsp] # Once or Twice/Week’ __ Thu Apr 17, 2025 TH 1Q25 28:F:3:7 LAST HAND WATERING: FRIDAY We Start Auto-Fertigation Light Distance: [ 13.5, in] # 2“ Today EC: [ 1.8, mS/cm] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [16.9:16.9:8.5:8.5:6.8:0.0:6.8:0.0] # [ 10, 5, 4] - [x] Photosynthesis Plus: [ 12, ml] - [x] Terps Plus: [ 2, ml] - [x] Quillaja 60 Powder: [scant]