Hi guys, Welcome back to Queen Peaky's Grasslands This week we will dedicate it to just rinsing the soil to discard all excess nutrients😎 You can already perceive some excellent smells👻 I hope you l

Another good week!! I need to LST and defoliate... probably going to do that tomorrow. I fed them this week as well as watered. I will add the flowering nutrients going forward!! Otherwise, I hope this grow continues to go well!! Cheers!!

Day 127 Mon Add water PH 5.8 EC 0.6 PPM 300 DLI PPFD Water 18 Day 128 Tue Flushing PH 6.0 EC 0.1 PPM 50 DLI PPFD Water 19c Day 129 Wed Add Ph Down PH 6.3 - 5.9 EC 0.1 PPM 60 - 50 DLI PPFD Water 18c Day 130 Thu PH 5.9 EC 0.1 PPM 60 DLI PPFD Water 20

Man this week has been taking forever, my theory is it will only get slower relative to harvest just because my excitement. I top dressed with about 2 inches of worm castings with an eyeballed mix of 2tbps of bone meal (3-14-0, bloom fert.), 1.5-2tbps of Gaia green all purp.(4-4-4, I don’t have an actual potassium fert. Like leingbenite So I use this), 3tbps of dr earth kelp meal (1-.05-2 has many different vitamins, amino acids, carbohydrates) and 2tbps of mykos (for microbiology inoculation and nutrient uptake/upkeep). So I every time I water I have this old 2gallon water tin that I usually fill up about a quarter to half way full. Using this amount of water and the 5 gallon bucket of my soil mix makes my watering schedule once every 3 days (on average). I do use bottle nutrients but it’s mainly for the supplementing. For feeding I use 2-3ml to half a gallon for all bottle nutrients, I have never gone over, and I have never had deficiency’s that can hinder plant development. Deficiency's: PSA: Now if anyone happens to read and actually look at my plants please do look closely and maybe let me know if you see something that I have missed since I’m still very new. I noticed my plant was having a cal mag issue so that’s why I top dressed with worm castings, I also top dressed with about 3tbps of azomite (I feel using azomite it may help with all those unnoticeable deficiency’s that a new grower might miss). I’ve been noticing on some of the leaves the very tips are showing discoloring, since the color is still so vibrant mostly I can rule out nitrogen, phosphorus, Iron, manganese, and sulphuric. It’s still very early stage so I did an extremely light foliage feeding (in the dark to prevent UV damage) of 2ml of big bud, big bloom, and tiger bloom, mixed into half a liter of water, I then emptied the spray bottle and sprayed with tap water just to make sure there’s no nute burning. Today I fed the plant through water amendments with 3ml of big bud, 3ml of bud candy, 3ml of big bloom, and 2ml of tiger bloom;(my theory is hopefully the nutrient deficiency’s will go away) My soil mix is pretty basic. 40% coco, 10% perlite, 10% well composted chicken manure, 20% black gold compost, 20% worm castings. I’m not going to put the fertilizer amendment percentage to be honest I eye ball it but there’s a rough general measurements that I do.

1 plant was very ripe, 1 plant was almost perfect to harvest and the 3rd could take another 1-2 weeks...but it was end of 10th week of flower and i had to go on vacation, so i perhaps choped 1 plant abit too early....still awesome result!

Still got some slight burning of leaf tips more so on the right side of the tent. Otherwise, growth is good. Stratiolaelaps scimitus are now abundant in the soil. Pretty neat. GIBBERELLIN: Note: As gibberellic acid is not soluble in water you need to dissolve in alcohol first, Mixed 0.75g Gibberellic Acid 90% with 50ml of 99% Isoprponal alcohol , (Any alcohol will do but a higher % works better) also warmer alcohol helps dissolve the gibberellin. Mixed with 1000ml =1L of distilled water, bringing the concoction to 400ppm. 2000ml = 200ppm etc Every plant has a different threshold required to elicit a response, 400ppm is on the high end of the scale I've read to be careful with dosage as it's easy to over-apply, let's find out if it does anything like it described. Added bunch of enzymes, aminos, 5 or so different kelp. Can be kept for 1 week in the refrigerator. Nutrients for the week are recipe foliar application. The speaker (containing a 3 KHz signal and nature sounds) is played at high volume with high treble and medium bass for 10 minutes before spraying the plants. The plants are then sprayed while it's playing and the sound is continued for another 20 minutes after spraying. Both sides of the leaves should be saturated. Treatment is best performed early in the morning/daylight, preferably in foggy 65+RH% dew. On cold mornings, spraying should be delayed until late afternoon if outdoors. Do not spray plants when the temperature falls below 50o F. The formula also can be administered in the regular weather supply, by drip-feeding, hydroponics, etc.. The nutrient solution should be applied once somewhere in first 4 weeks, then twice weekly thereafter. https://biologydictionary.net/gibberellin/ Once a plant has sprouted past the surface of the soil, the endosperm is long gone. The plant must now rely on photosynthesis for food. However, the role of gibberellin does not stop at the seed. Gibberellin is responsible for many aspects of plant development. Further, plants produce many forms of gibberellin molecules, which act on different parts of the plant. In the image below, you can see the effects of a specific gibberellin applied to a plant. In number 1, no gibberellin was applied. Plants 2 and 3 both had gibberellins applied, with plant 3 receiving the highest dose. Gibberellin here encourages the plants to increase their internode length or the length between their leaves. In many plants, the regulation of gibberellin is an important natural process that regulates their height due to this process. At the cellular level, gibberellin is influencing the balance of proteins. In doing so, it encourages cell growth and elongation in the stems and between nodes. In some species of plants, gibberellin is involved in many more processes. These include flowering, fruiting, and senescence, or the natural death of leaves and other plant parts. Interestingly, many genes that regulate and adjust gibberellin levels are influenced by the temperature. Thus, when the temperature changes during seasonal change, the plants react to this as gibberellin levels change. This starts off many processes such as flowering and fruiting. Gibberellin molecules are involved with and interact with other plant hormones. The auxin level, for example, is directly related to the gibberellin level, and the two complement each other. Ethylene, on the other hand, tends to degrade gibberellin levels. Plants use these hormones, which respond to different inputs, to balance and react to inputs from the environment. These inputs signal various environmental conditions, which the plant is keen to take advantage of. Gibberellin Structure Gibberellin molecules of different types are synthesized in many different parts of the plant. Currently, there are over 100 uniquely identifiable gibberellin molecules. These molecules are synthesized in many cells of the plant, but tend to be concentrated in the roots. This is different from auxin, which tends to concentrate at the apex. Gibberellin is a diterpenoid, which is a familiar and highly represented molecule in biochemistry. It forms the basis of molecules like Vitamin A and Vitamin E. Seen below is Gibberellin A1, which was the first identified gibberellin. Other gibberellins have the same basic structure, but have various side groups attached. These groups affect where and how the gibberellin acts, which is how gibberellin can have so many diverse and unique functions in different tissues

Had budrot on one plant due to thunderstorms every day last week. Took that plant out last week. Also took the main colas as a preventative measure. Left all the smaller buds. Now I took the one plant which I believe is cheese, I actually grew 2 cheese, 2 gorilla girl and 2 white widow seeds and ended up with these 4 plants.... the one I harvest looks like it's been ready to harvest for some time now.

420Fastbuds FBT2304 Week 9 Hello everyone from far and wide on this beautiful planet. Weekly update for these twins. Both seem to be in mid flower on cruise control with no big issues present. I'll most likely stop feeding nutes this week and just go with ph'd water after that till harvest. All the colas on both are super chunky so it'll be exciting to see how the next week or two turn out. All in all Happy Growing

Did a full leaf strip on everything this week, the pics and videos were taken 2 days ago I just havnt got around to uploading them. Everything bounced right back after the strip but the pots arent drying out as fast and humidity went down a little bit. Use the code bangdang for 10% the following sponsors.. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led

Candy gas ⛽️ 🍬

🍀🍀

Lets go

Getoppt um Platz zu schaffen, da mein Wachstumszelt nur 40x40 cm hat. Jetzt kann Sie schon einmal neue Triebe ausbilden.

6th week of flower, I just started increasing N because their color was starting to fade a little sooner than I'd like for a 10-11week strain..

All three girls are officially in bloom! 🌼 #2, our surprise LST candidate (thanks, fan 😅), has now also entered flowering, and is looking strong! #1 has shot up and is clearly the tallest in the tent, stretching like there’s no tomorrow. Meanwhile, #3 decided to skip the gym and focus on curves, she’s staying short but growing wide, even without any training 💪 Overall, everything is going smooth, healthy. Let’s see what these girls bring in the next few weeks!🌱

Day 103: It was a great pleasure growing the Kitsune Kush Automatic from Zamnesia Seeds. Only the main stem was bent and very few leaves were removed. The amount of work, if you can even call it work, is very minimal. Tag 103: Es war ein großes Vergnügen, die Kitsune Kush Automatic von Zamnesia Seeds anzubauen. Nur der Hauptstamm wurde gebogen und nur sehr wenige Blätter entfernt. Der Arbeitsaufwand, wenn man überhaupt von Arbeit sprechen kann, ist hier sehr gering.