Its a soft smoke, But feels good and relaxed This strain will be done a next time.. Its a smoke you will not forget -------------------------------------------------------------------- This is the last one thats still going on.. I have cut 11 and I gave 3 away.. But this lady is a hard to get... Hopefully I can smoke her before 2017

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

30.04.2024 Continue into week 9 Clean nutrient tank for the last time...This is last week of flowering for almost all girls. Electrical Conductivity (EC): 0.8 for this week.. Purple Lemonade: First pheno is insane! Shape, size ,color, bud hardness, appearance, frostiness' all attributes to become photo model! Beautiful and high odor in the room! Lighting Parameters: PAR Map: Maximum PPFD is 800, minimum PPFD is 550. VPD: Ranges from -0.1-1.1 Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 19-20°C. Leaf Temperature: 21-22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 60%, positioned at a 45-55 cm distance. Girls drink less water, so for this week and till the end of flowering new misting timing's Daytime: ON for 50 seconds, followed by 30 minutes OFF. Nighttime: OFF for 50 seconds, followed by 45 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.80 and 6.00. Stable PH, small drifting up and downs EC: 0.87 Temperature: 19-21°C

I consider this the first full week of real bloom, and she looks beautiful. For now, I'm just letting her grow. I don't want to defoliate yet, but it will happen very soon. I had no problems at all this week and enjoyed watching her grow.

Servus Moin! Die Pinapple Slush XL geht richtig in die Höhe! Die Woche bekommt sie wieder schön Dünger und dann mal sehen wo es hingeht.

Harvest day! I left it without light for 48 hours. The buds are full of resin and very fragrant. Now I just have to wait to taste them, the hardest part. 😊🍀💪🌴

Sie wächst 😁 Die Drähte hab ich auch noch mal angezogen damit sie schön in die Breite geht. Jetzt bin ich am überlegen ob ich mir noch ein Netzt spanne. Aber da hab ich mich noch nicht entschieden mal sehen.

I’m Missing a lot of pics but so far the grow has been great. This is my second grow and first organic grow. Started in early feb. vegged for almost 9weeks. I haven’t had any major issues with this strain whatsoever, will definitely grow again. Has a sweet fruit, gassy and earthy smell. Smells amazing can’t wait. Hoping to yield a few ounces hopefully she bulks up some more before harvest.

🤙🏻 30.08 (1) - Geburtstag beide sind am gleichen Tag aus der Erde gekommen 🌱 31.08 (2) 01.09 (3) 02.09 (4) 03.09 (5) 04.09 (6) jeweils 250ml Wasser mit Root Juice / Links etwas Erde nachgelegt 05.09 (7) Höhe Links 6,5cm / Rechts 4,5cm

They are now growing faster than fast... They are getting ready for flowering. I will soon switch to hesi nutrition... 🙌👍

Experiment in progress A Dark room & no water for the next 4 days then I’ll harvest.

It was a last week of flowering. Next week will post a photos of a harvest. Some conclusions from the current grow- It is looks like there was too much light. Many top leaves were too dry. Next grow will use only one 240W lamp

Start week 6 flowering This buzz is really wet and sticky Growing really fast Auto defoliation 😂 problem with pot to small

I added a C02 bag... hmm... probably not enough. Maybe time to look into a small tank system. I will likely flip to flower soon. All the plants get to play!

Day 1 - LST train both plants... Mostly SB1 to have a wider canopy let the smaller nodes catch up. SB2.. Nice structure, really upset to break 1/2 of it... But loads of energy and recovered /train well. Nodes larger than SB1, but SB1 has mode nodes

It worked! After 30 days away, I returned home to see if automating the first 30 days of this grow using the Blumat watering system and automated fan from AC Infinity worked. Day 36 - I defoliated quite a few large fan leaved and did some LST to expose some flowers to light.

-Soil mix is FFOF with 20% perlite added -Led light hung 30” over top of seedling set on 4/10 clicks

Day 7 - 21/09/23 🌳 OG Kush is growing well. a nice healthy shade of green, and a decent height too. although the first leaves are a little odd looking to me. maybe its a phenotype thing? 🤔 Day 10 - 24/09/23 ok so i saw this growth on my OG Kush, which was not there last night... mold? mycelium? what the hell is this? 65W LED hanging at 14" running at 80%, 18/6 light schedule. Just using water to keep substrate around seedling hydrated. roughly using around 200ml every 24hrs.

Its been topped She does look a bit tired hopefully she’ll pick up