Hey everyone First week of flowering here Plant is doing great Removed some starting popcornbuds and took away some mint and Lemon Balm. Was getting bushy down there 😂 Gave a last feeding with Alga Grow, next I will start up flowering nutrients. PH around 5,8. Will water in a bit higher next time. Sprayed her with Vita Race for one of the last times. Neem Oil doing his job too, no bugs to see 🙏 Weather is not that great. Not that much sun and cold nights. Lots of rain this week too and upcoming week no difference 😒... What a great summer huh haha So far so good See you guys next week Happy growing 😉🙏

Day 1 of week 6: 26th Sept Slow start to this week with an update as my phone is broken. Girls looking good but no pics to show.. Day 2 of week 6: 27th Sept Nutes in as usual! Girls looking good and I think the CalMag is working a treat! 🤞🏼 Day 3 of week 6: 28th Sept Just added some pics and a lil vid today to kick this week off after a slow start! Day 5 of week 6: 30th Sept Nutes in again today and some more defoliation due to yellow leaves not getting enough light.. I was a little worried I hadn’t sorted the CalMag deficiency out properly but the girls are looking much happier now I’ve got rid of those yellow leaves and LST’d them a bit more. 😍 Day 6 of week 6, 1st October: Girls looking much happier since yesterday’s removal of yellow leaves and more LST!! They’ve bounced back so nicely!! Happy days 😊❤️ Day 7 of week 6: 2nd October Girls looking good, nutes in for the last time before switching to flower.. Switching to flower 🌹 during week 7 all being well!! Can’t wait to see some cola action!! ❤️, ✌️ and hair grease!

Back after a reporting gap. In that 20 days or so I just let things stretch as it moves into flower, taking branches to make room, and defoliating. Things got a little taller than I wanted but overall I am happy with the spacing. There was a slight molybdenum deficiency that went away when I started using my flower booster. But other than that, nothing all that interesting.

โดนแมลงเข้าโจมตี 😩

9/13 everything's coming along nicely. They look a little hungry for nitrogen. Also showing signs of nutrient burn. Fed them more than I should be. Id like to note that these plants seem more sensitive to nutes than other genetics 9/16 I was right about them being sensitive too nutes. One of the plants is quite burnt by the looks of it. Both plants are extremely frosty though for how early it is. I flushed both plants 3 days ago and today, hopefully it evens out the nutes in the soil. Most of my grows have been with coco, I'm not used to having excess nutrients let alone any in the soil. Nonetheless these plants may be the most impressive ive ever grown In the resin production aspect

10/31/2022: Happy Halloween!! 🎃 Not much to update today. Just installed my scrog net the other day, but I'm thinking I may need to lower it. I'm going to wait and see how much stretch I get this week. Plants were all watered yesterday and are still wet enough. Light is turned up to 100% at this point, but raised it a bit more. At 18 hours of light my average DLI is about 45, which is as high as I will take these. 11/3/2022: Did a heavy watering for all 3 plants today, since they are all still stretching. About 2 liters per plant, using the Coconut Water Powder and Bio-Phos. Ph was 6.7. Also did a bit more defoliation on the Newberry and Orange Bubblegum. All plants are looking great. I think raising the light helped with the slight droop the Newberry had. They are starting to smell now too. When I open the tent, the whole house smells. Love it, haha! 11/5/2022: light watering today with the coconut water and Fish Shit. The Newberry and Orange Bubblegum continue to stretch and the Strawberry Gushers appears to have finished it's stretch and the flowers are beginning to get larger. All 3 plants look really healthy and have no problems at all. Also, most of the fungas nats seem to be gone. I'm assuming the predator mites in the BuildAFlower ate most of the fungas nat larvae. Only issue is the plants did not stretch as much as I expected, so my scrog net is a little high, but I'm just going to leave it. Avg. VPD:1.1 PPFD: 700 DLI: 45

🍊🏵️ Red Mandarine x9 SoG X ViparSpectra XS1000🍊🏵️ 🏵️17.5 We start again with a new week and the implementation of the new format, which is enjoying great success. Thank you all for the support 🙏💚🦄 🏵️18.5 🏵️19.5 🏵️20.5 🏵️21.5 🏵️22.5 🏵️23.5 _________________________________________________________________________________________ ❓ Are you new to the world of the cultivation and don't know where to safely buy your seeds? 😮From SweetSeeds you can find award-winning, sweet, fast, fragrant, beautiful, and delicious genetics !!! ✅http: //bit.ly/SweetSeeds_ _________________________________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ✅ https://bit.ly/ViparspectraXSSeries ⏩ Use "GDVIP" for an extra discount or "DREAMIT" for an extra 5% discount 👀 Search for it on Amazon ✅https://amzn.to/3ttb2j9 ⏩ Use the code - lt10gdvip - for an extra 10% discount 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT __________________________________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚 Thank you and enjoy the growth 💚🤗🤟

Auto Maxi Gom has been steadily making progress. She has started stretching, and is progressing more into flowering. I switched the feed over to blooming feed early week. I defoliated and did some lst. Everything is looking good, and nothing more to report at this time. Thank you Medic Grow. Xpert Nutrients, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Great 50/50 hybrid, terp profile is a creamy gas with phunky rancid fruitypine kush tones, fruity coffee tones, Doughy, Candy GMO Dried for 15 days in dark dry tent at 58RH 67F | Dry hand trim | Curing in Grove bag

Hey everyone :-). The last plants were also placed in the bloom chamber kammer. Everyone has made great progress this week 🙏🏻. There is not much to say about this week, I think videos and pictures say more like words 🙈😎. I wish you all a good start into the week :-) Stay healthy and let it grow 🙏🏻👍

Week 5 day 1. I have a favourite for next run. I’m very happy, I haven’t really defoliated at all this grow, just letting it grow. Wish I was going for mains(topping) but still very good. Going to wait around week 9 so seeds will be good for next run. I have decided to do very hard hst next round to show max potential. Very happy with supercropping so will do it very heavy with scrog. I will try to reveg the one I really like but it is difficult having only 1 set of lights and 1 tent. Plants are about 7ft tall, might just run 2 next round in 4x8 or will still continue to go 4 in the 4x8.

10/06/2018 Week 3 flowering and she is developing very nicely, a couple of tops poking through scrog. Drain and fill reservoir, roots are huge it will be interesting to see how many liters it will take to bring up to full. 10/08/2018 Peaked at the roots, and they are massive i fear that she will be limited in root space, 6 liters to top reservoir starting out I needed 9 liters, so I guess roots take up 3liters worth of space! Time to keep close eye on water level, as feeding frenzy is about to commence.😀, and definitely getting her stretch on!,so if i get the Captains Cake taste, I be happy,cause she definitely got some stretch i wanted. 10/11/2018 Stripped lower branches under the scrog, good growth bud sights getting denser, posting before and after pictures of week 3 defoiliating.

Hey guys! So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?

It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.

Anfang der 3. Blütewoche haben wir beide Entlaubt und Lollipopping angewendet. Jetzt brauchen beide Zeit um sich zu erholen.

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)