Likes
1
Share
Another week done. Final selection of the 3 phenotypes I found in a 10 seed run of the f4's. I am pretty confident I'll be carrying on the dark purple/red male since heavy anthocyanins production is what I was hunting for in this particular venture. Will be collecting pollen as I'm doing a good job keeping humidity low in the grow room so should be pretty viable. Will be crossing this into my winner from the ethos hash plant run as well as the rainbow belts
Likes
27
Share
@Zamzam974
Follow
La wombat féminisé qui a passé 84 jours sous 18h d'éclairage avec les auto, aujourd'hui elle a 91jours j'ai passé en 12/12 sa fait 7jours, gros travail pour le scrog pas facile avec les branche solide certaine ce sont pliers normal... J'ai ajouter du compost maison. Arrosage a l'eau tous les deux jours 1.25l, j'ai hâte qu'elle passe vraiment en floraisons j'espère le strecht ne sera pas énorme 🙏🙏🙏 à bientôt les amis
Likes
8
Share
@Ddddgbbb
Follow
Pictures are made while watering so it has + 30 cm in height in the beginning i fucked ip ph + with the lamp it was 2 close to the buds they turned purple never had this type of issue this early on veg hope plant will develop everything what it should cuz now ppm+ ph is normalysed
Likes
1
Share
@GrowwUp
Follow
It looks like one of the plants got some light burn so I'm taking the lights higher but keeping them at 100%. I'm gonna check them every day from now on as it might be wind or even nut burn as well. I had to add some taps to control the flow on my irrigation system. It looks even cooler now.
Likes
10
Share
Both plants continued progressing through early flowering this week 🌸 Vertical growth slowed but has not completely stopped yet, so the light fixture had to be raised again to maintain proper distance. • Height now approx. ~110 cm • Stretch slowing but still slightly ongoing • Bud sites becoming clearly visible across the canopy Light intensity was increased to ~950–1000 PPFD ☀️ Environmental conditions remained stable: • 25.5°C temperature • 50–55% RH 🌡️ Trichome production began appearing toward the end of the week ✨ Resin is now visible on both the sugar leaves and the bud sites, though aroma is still very mild at this stage. Phenotypic differences remain noticeable: • Pheno #2 is slightly ahead in flower development and continues to grow very compact around the main stem • Pheno #1 maintains a more open structure Water demand remains high during early flower: • ~4L every 2 days until runoff 💧 Feeding this week: • 1x Orgatrex • Otherwise water + BioBizz CalMag Defoliation was performed again this week ✂️ Slightly more leaves were removed than the previous week, improving light penetration without causing excessive stress. Midway through the week, Pheno #1 showed clear signs of hermaphroditism. Initial pollen sacs were discovered and carefully removed. Despite close monitoring, additional pollen sacs continued to develop toward the end of the week. Due to this progression, the decision was made to remove the plant from the tent to prevent any risk of pollination. The plant was cut down and processed separately, as it was clearly expressing unstable traits. Overall, the remaining plant continues to develop well, with visible resin production and improving bud formation ?🔥
Likes
25
Share
@Vincent11
Follow
Hi Everyone A great week like always for the Gorilla Autoflower from RQS. Buds forming up nicely getting bigger by the day. Some big buds forming again. She is doing really good besides the light stress I always cause because no high in little grow room. She accepted high PK Bloom nutrition really well and we are gone into first flower sprout first orange/brown pistils have appeared. This means she is getting ready to go into finishing and concentrating on buds ripening. From my experience most Autoflowers have 2-3 cycles off flower spouts before they are ready. So one more week High Bloom nutrition awaits my baby. Feeding her 2 times Nutrition, 1 Time 6PH water only 1.2 Litres every 2 and half days. I think she will do well on the scale. Thanks everyone for following and good luck growing. Happy Growing
Likes
3
Share
@skipakz
Follow
Eine Pflanze Mitte der 11. Woche teilweise weggeschnitten (Pflnaze hing in der Blüte stark hinterher, war seit Steckling heller als alle anderen trotz gleichem cut, sah ungesund aus, wenig trichombildung etc. - man siehts auf manchen Bildern an den Blättern) so kann ich den freigeschnittenen Platz für untere Triebe nutzen… seit letzter Woche nun Athena PK und Calmag dran. Habe nochmal ordentlich entlaubt + nutzlose Blüten weggeschnitten das die unteren Triebe nochmal richtig Gas geben können.
Likes
93
Share
@Hologram
Follow
Asyou can see, my lil'Candyshop has got alot of sugar already! But her buds are not fattening up bc she is foxtailing a bit... It was very hot this week with temp of alomst 40C without wind.. Temp is now a bit lower.. and letshope she can get some weight on her those last weex! (next time gonna top her and do some LST.. 👍 i was a bit of a dummy by not doing that this time, being lazy i guess😳) Happy growing for all✊ ***KISS growtechnique: KeepItSimple,Stupid!
Likes
Comments
Share
Likes
15
Share
@AustinRon
Follow
LJ4Q23 Flower 9 SOP LJ4Q23 - 8-Plant SOG from Cuts Harvest Window - Earliest: 2024.02.01 - Latest: 2024.02.10 Objective: - 8 Plants - Single Colas - No Branches - Harvest Lemon Jeffery (Narrow Leaf Phenos): 70±5 days - Light Intensity - Ramp up from 200 - 40 DLI, at 13 hour ScotoPeriod, will need MAX Light to Achieve ______________________________________ Start of Week: [ 2023-01-24, LJ4Q 57:F:8:1] End of Week: [ 2024-01-30, LJ4Q 63:F:8:7] Plant Height: [ 21, in] Temp: [ 78, °F] RH: [ 61, %] VPD: [ 1.2, kPa] Light Intensity Peak: [ 850 , µMol/m2/s] Light Distance: [ 11, in] Environment Targets (Flower 7 - 9): - Scotoperiod: [ 13, h] # Contiguous dark hours daily - TemperatureMax: [ 78, °F] - RH: [60, %] - VPD: [ 1.1, mS] - LightIntensityMax: [ 1000, µMol/m2/s] - LightDistance: [ 8, “] Fertigation Plan: - RLA Hydro Chart, EC 2.0 - 1.1 - Primer A: [ 6, ml, gal] - Primer B: [ 6, ml, gal] - Silica Skin: [ 2, ml, gal] - Resin Bloom: [ 2, ml, gal] Penultimate 3 Days (before Harvest) - RLA Resin Bloom, EC: 0.8 __ Wed Jan 24, 2024 LJ4Q 57:F:8:1 - [x] EC: [ 3.3, mS] - [x] Runoff: [ 500, ml], [ 62.5, plant], [ 15, %] Estimate 440 ml/plant/day (10% of Container Volume) Confirmed 1 min increase in event duration yields Runoff 200 ml/day @ 5 Minutes, we’re delivering 1 Liter per event, 6 Liters per day TOTAL, .75 Liter/Day/Plant Refresh Reservoir - [x] EC: 1.8, 2 Gal - [x] PrimerA: [ 9, ml, gal], [ 18, ml] - [x] PrimerB: [ 9, ml, gal], [ 18, ml] - [x] Silica Skin: [ 4.5, ml, gal], [ 9, ml] - [x] Resin Bloom: [ 4.5, ml, gal], [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml, gal], [12, ml] - [x] Quillaja20 Powder: [ 0.5, tsp, gal], [ 1, tsp] - [x] SLF-100: [ 5, ml, gal], [10, ml] __ Thu Jan 25, 2024 LJ4Q 58:F:8:2 - [x] EC: [ 3.4, mS] - [x] Runoff: [ 600, ml], [ 62.5, plant], [ 15, %] - Reduce Fertigation Duration :30 per event Runoff Estimations - RunOff Total/Day: [ 500, ml] - RunOff per Container/Day: [62.5, ml] - Estimate 10% Irrigation/Day: [ 440, ml, plant] - Runoff %/Day: 62.5/440: 15% Estimated Deliver/Plant/Irrigation - Irrigation: [ 440, plant, day] - Runoff: [ 62.5, plant, day] - RunoffPCT: [ 15, %] - Total Irrigation/Day: 3.6, liters, Day (Just Shy of 1 Gal/Day) TempAvg: [ 79, °F ] RHAvg: [ 59, % ] VPD: [ 1.12, kPa ] PPFDAvg: [ , ] LightDistance: __ Fri Jan 26, 2024 LJ4Q 59:F:8:3 - [x] ECReservoir: [ , mS] - [x] Runoff: [ 600l+, ml], [ , plant], [ , %] - [x] ECRunoff: [ 3.4, mS] __ Sat Jan 27, 2024 LJ4Q 60:F:8:4 - [x] Back off Light 1” (3 Clicks) - [x] Runoff: [ 600, ml], [ , plant], [ , %] - [x] ECRunoff: [ 3.5, mS] __ Sun Jan 28, 2024 LJ4Q 61:4:F:8:5 - [x] Runoff: [ 500, ml] - [x] ECRunoff: [ 3.3, mS] - [x] Med (2.7) chart for EC: 1.5 - [x] Primer A: [ 8, ml, gal], [ 16, ml] - [x] Primer B: [ 8, ml, gal], [ 16, ml] - [x] Silica Skin: [ 5, ml, gal], [ 10, ml] - [x] Resin Bloom: [ 6, ml, gal], [ 12, ml] EC: [ 1.6, mS] __ Mon Jan 29, 2024 LJ4Q 62:F:8:6 - [x] Runoff: [ 500 , ml] - [x] ECRunoff: [ 3.3, mS] __ Tue Jan 30, 2024 LJ4Q 63:F:8:7 Refill Res: ~2 gal - Primer A - Primer B - Silica Skin - Resin Bloom EC: [ 1.3, mS] - [x] Runoff: [ 475 , ml] - [x] ECRunoff: [ 3.3, mS]
Likes
Comments
Share
@mojogrow
Follow
It was my first grow and I really screwed it up a lot, but it resisted all my beginner mistakes, pests, stress, being without irrigation, irrigation without measuring PH, revegetation, etc. I love her, really, in love with this strain. It is a genetics with a very relaxing effect, recommended for those who cannot sleep at night. shoutout for trimix, very good prices for begginers> https://www.trimix-pro.com/
Likes
1
Share
@Raul2021
Follow
Día 81 de cultivo, día de cosecha y secado, se retiran las hojas grandes y se cuelga dentro del armario a secar, con un deshumidificador trabajando entre 50% y 60% de humedad. Se han obtenido cogollos grandes, resinosos y con muy buen aroma afrutado y dulce.
Processing
Likes
17
Share
We’ll week ten is here and I’m amazed to say the least. The girls are doing wonderful. Getting sticky and thick. Probably going to start flushing the zkittles and purple lemonade here in the next day or so. Most of the tricomes are milky noticed one or two ambering. The blackberry has another week I believe. They all smell amazing. Can’t wait to smoke them!
Likes
26
Share
All 12 are flowering now ! rolling through week 5 almost at the end of start of week 6 . This is for tangiematic , gg4, and sweet creme glueberry a few days behind . The hazes and others are 2 weeks behind And forgotten cookies stretching out nicely ! The frost level is amazing . Leaving. Also got a new kitten about 4 months old her name is dutchess loves being in the tent smelling each plant truly amazing :)! Little update by the end of week 5 !
Processing
Likes
84
Share
SATURDAY: Today I mixed up 5g of nutes for my bloomers and douched them. I'll let them dry completely for 2-3 days, then flush them a bit with a little boomerang and calmag. I ordered a Gorilla lite-Line High CFM kit last week and received it today...fits my tent poles perfectly. This really works to keep the tent walls from collapsing in too far, and I was able to use one pole to rig a shelf to put the fan. That freed up a good bit more floor space. Yesterday, I ordered a 4 x 4 Vivosun tent and inline fan, and a 1500w (5 x 300w COBs)..this tent will be for vegging autos to put into the flowering tent as others are harvested, as well as a place to veg photos that I encounter before they are moved outdoors. I'll probably end up ordering another of the same lights, but for now I have a few supplemental lights I can use...blues and daylights. I'll drop a few WW's or CC's as soon as that stuff arrives so they are big enough to occupy flowering tent space in a few weeks. SUNDAY: I spun everybody around and misted with spring water a couple times throughout the day and formulated my plan for ventilation of the new tent which should be here Tuesday. I plan to hook the exhaust from my 4' x 5' tent as fresh air intake in the top of my 4' x 4'. By doing so, all that good CO2 that is exhausted from the flowering tent will rain down over the veg tent inhabitants before being exhausted from the bottom of the tent. I don't think heat will be a problem in the new tent with so much less light, so I'm optimistic that it will work just fine. I may even route the exhausted veg tent air back into the bottom of the flower tent, giving the girls another shot at the CO2 enriched air....we'll see... MONDAY: Got the room ready for the new tent which will arrive tomorrow, misted, rearranged, and whispered sweet nothings to all the girls. Tried out my new macro lens...need practice.. TUESDAY: Mixed up 7.5 gallons of nutes for the bloomers...ceased open sesame and began beastie bloomz. Assembled my new 4' x 4' Vivosun tent and set up its ventilation and lights. I implemented my idea of exhausting the semi-cool/CO2-rich air from my flowering tent into the top of the veg tent. Only needed 5' of flex duct, so it's got great airflow..no need for another intake fan...yay! Tomorrow I'll get the 6" x 6" x 6" 'Y' duct and connect my 6" booster fan to it. The booster fan will still be sticking into the flower tent, drawing 70 degree a/c air into the tent via direct flex duct connection, but will now be mixed with the exhausted air from the veg tent. I'm probably gonna keep the ventilation in both tents running once I've got a fully closed-loop system. The only reason I was shutting down the ventilation was so that CO2 would build up for 4 hours, but even if it gets exhausted from the flower tent, whatever the veg tent inhabitants don't consume will find it's way back to the flower tent in under a minute...and so on, and so on.. I spent a while putting together a lighting schedule that will allow me to decrease temperatures while still keeping optimal color spectrums and maintaining good light intensity. Had to empty the tent so I could get to everything...what a pain! --------------------------------------------------- FLOWERING TENT Timer #1 --- exhaust, intake (digital timer) on - 6:15am off - 2:15am Timer #2 -- primary blurple light (manual timer) on - 6:30am off - 10:30am on - 11:30am off - 3:30pm on - 4:30pm off - 6:00pm on - 6:30pm off - 8:30pm on - 9:30pm off - 2:00am Timer #3 -- all 4 daylight cobs (manual timer + power strip) on - 6:00am off - 12:00pm on - 12:30pm off - 6:00pm on - 6:30pm off - 2:00am Timer #4 -- all 4 overhead reds, sub-canopy tubes, side strip lights (manual timer + power strip) on - 1:00am off - 6:30am on - 10:30am off - 11:30am on - 3:30pm off - 4:30pm on - 8:30pm off - 9:30pm Timer #5 -- all 4 miracle LED (flowering) in corners, corner, daylight supplemental (manual timer + power strip) on - 6:00am off - 10:30am on - 11:30am off - 3:30pm on - 4:30pm off - 8:30pm on - 9:30pm off - 2:00am ---------------------------------------------- VEGETATIVE TENT Timer #1 --- primary light and exhaust (manual timer + 3-way splitter) on - 6:00am off - 2:00am Timer #2 --- blue supplementals (manual timer + power strip) on - 2:00am off - 6:00am on - 10:00am off - 2:00pm on - 4:00pm off - 8:00pm Watching temps closely.... ------------------------------------------ WEDNESDAY: My new lighting schedule seems to be working..high was 87 today, and it dropped into the upper 70's last night...schweet! I'm pretty confident that when I get my ducting in on Friday and have the closed-loop ventilation for the two tents completed, that it will drop the temp even further and I'll not be wasting so much precious CO2...and then I can ADD MORE LIGHTS and begin with renewed heat mitigation efforts!!! I'm really wanting to pump up the deep reds and maybe far reds during their 4-hour "nighttime" ...maybe more low-wattage sub-canopy tube lights, too. I guess that the girls really loved the Beastie Bloomz...much fattening happening... It was so nice being able to move Kushpialidocious into the new veg tent...more space, better canopy penetration. THURSDAY: Spun everybody around and misted with spring water..soil still moist. Temps held pretty much...86-87 all day..i changed the overhead light timer a bit so it kicks on a half hour earlier and as a result temp climbed to 89-90 for about 15 minutes, but quickly dropped to 85 when the 4 COBs turned off... when the big blurple and 4 miracle leds in the corners ( + the extra 40w daylight supplemental in my darkest corner) turned off 15 minutes later, it quickly dropped to 79.....15 minutes later...74...15 minutes later...72!!! "By Jove, I think he's got it!" I might actually be able to harvest these fuckers with all terpenes intact.👍 On second thought.😎..I'm gonna dial back the reds a half hour again (and maybe the 4 COBs), because I'm going to try switching out the 40w Sansi bulb for my extra 100w Bridgelux/Epistar 3500k COB light. (MORE POWER!) I really don't think it gets very much, if any, hotter than the Sansi 40w. I'm really hoping to keep it below 90 at all times and as close to 70 as possible at night (red zone).. new temperature test will be tomorrow. It will also be the first run with the closed-loop ventilation system in place...all ventilation will remain on at all times in both tents, and based on my rudimentary calculations, my 2 x 6" inline fans and the 6" duct booster can move enough air to circulate through both tents about 240 times per hour. I figured that like this: The 3 fans move 1,010 cfm. The two grow spaces total 252 cu ft (4 x 5 and 4 x 4) There is just over 12 feet of ducting involved in the loop, which is about 6 additional cubic feet. Correct me if I'm wrong...I'm not an HVAC guy.. The A/C kicks on, on average, every 12 minutes, so there will be a regular supply of cool fresh air injected into the mix as well. My hopes are high! (and so am I) One other interesting thing is that the addition of the 4-5 gallons of frozen water in jugs makes the substrate temp stay in the lower 70's all day long..I'm hoping the roots at least get the signal that "Winter is coming." FRIDAY: Well, shit. My closed-loop ventilation system didn't work quite right...evidently, I should have studied up on calculus. Rather than the negative pressure in both tents that I expected, both tents swole up like they were snakebit..(positive pressure?)..and temperatures in both tents started to rise...no pinche bueno. I'm sure it's my math that's off..., for example, I didn't account for the fact that the flowering tent has a carbon filter which decreases the cfm's considerably, and the intermittent flow of central air is a variable that I am also uncertain how to factor. So....I scrapped the idea until I can achieve truly equivalent intake and exhaust in both tents. HOWEVER...I did discover a trick that I will dub a "heat siphon," which is a definite improvement, but only in the veg tent. When I disconnected the flex duct from the 6" inline fan(exhaust) in the veg tent, I had intended to stub it off for now. I noticed that there was considerable "back-flow" caused by the duct booster intake fan in the flowering tent. So, the duct booster draws air from the a/c register, AND from duct which I've placed in the veg tent immediately above the light. I moved the 6" inline fan in the veg tent to to top of the tent and connected a 3' piece of duct to it that is also placed immediately above the one side of the light, so heat from the veg light is ejected into the room and partially drawn into the flower tent where it is mixed with cool a/c air, carbon scrubbed, and sent to the veg tent raining the unused CO2 down over them at about 85 degrees, which is considerably cooler than the normal tent temp. It's still not perfect.. Because the flowering tent is absorbing some of the heat drawn of the veg tent light, I'm up 3-4 degrees on average in the flowering tent, which is not what I was hoping for at all...it's now hitting 92 degrees in the flowering tent at some points during the day, and hovering at 79-80 at night, so I'm gonna have to revise the lighting schedule again..
Likes
2
Share
@UrbanBoer
Follow
An interesting discovery was made with this plant’s pot, I observed how having a row lesser of drainage drastically effected how I water this lady. Her grow medium swamps up if I maintain a 1lt daily water schedule, which would result in drowning the roots, luckily my grow medium has sponges up when wet, allow the slow irrigation to take place to avoid root rot. Luckily it’s spring time and in Mzansi(South Africa) it is hot enough to push my greenhouse’ temperature higher than the outdoor temperature, to encourage some form of evaporation and humidity, next week I will add pictures of the thermometers, and you can see the drastic difference in temperature.