Did defoliation on all three never done it before not sure did k over do it but they needed the trim I had a lot of fan leaves blocking bud sights Jan23 started to use the self watering pots from acinfinity gallon in each pot with fish shit

🔄 Looking back: Mimosa Evo #3 (Day 0 of flower) is still doing well overall, but continues to show signs of overfeeding 🚫 She doesn't seem very hungry, so I’ll lower the EC further – aiming for around 0.8 or maybe even 0.7. 🕒 Flowering begins: This week I flipped Mimosa Evo #3 to 12/12! Stretch is just around the corner 🌿📏 Really curious to see how much she'll take off in the next days – it’s getting exciting now!

Y nos fuimos a floración!! 🍀👨‍🌾🏻

CHERRY 🍒 COLA by FASTBUDS Week #8 Overall Week #3 Flower This week she's doing good towards the end of the week she started to her some burn on her leaves from the heat this summer☀️ ⛱️ she's in the middle of flower and the temp got hotter not idea but she's stinky and she's got nice trichomes on her buds. Stay Growing!!

Всех с новым годом! Сегодня 117 дней жизни моей девочки и ровно 8 недель как перевел ее на цвет. листья заметно пожелтели но она еще не готова, думаю ей осталось еще две недели, как и предполагалось. Сегодня я промыл ее FloraKleen - 3мл/л - 10л. Завтрашнего дня в течение двух недель(за исключением пожалуй последних нескольких дней) буду давать Ripen по 5мл/л.

Grand Finale

Everything is going well I got a raptor hood for my 600 watt so I was able to drop my light right on top of my plants maybe 6 niches away . Noticed she was getting a bit lighter in colour so I brewed up a tea first 1 ever just switched to organics tea looked good hopefully not 2 strong . I also pulled some branches out to open up more branches to get light as she was bushy and I did not want to cut most of the branches off because I'm not trimming larf lol. Now it's smooth sailing to the end I got 1 more top dressing next week and all I gotta do is water once a week

06/03/19 - unfortunately this was my own fault for being gullible with a mix of just not thinking, but I got a cal deficiency on my OG which was fitting seeing as everything was going well, but I think I have resolved the problem as I’m not see the new growth being affected but I do think it has slowed down in growth abit but I’m guessing that’s understandable, I’m really happy I’ve turned to mills as I can tell a difference from my previous grows, this slight hiccup was my fault but they were that healthy I’m almost positive it’s gonna spring right back 🤞🏻 09/03/19 - definitely looks like it stopped growing for awhile as the gelatos are a hell of a lot bigger now compare to my OG but I think the problems been solved as their was only a little progression on some of the newer leaves but the newest set of leaves seem unharmed includeding the side branches. 12/03/19 - a lot smaller than the gelatos but never the less I’ve started the LST/leaf braiding with the OG aswell to make sure the side branches catch up as they were stunted from the cal mag def

Hey everyone :-). The last plants were also placed in the bloom chamber kammer. Everyone has made great progress this week 🙏🏻. There is not much to say about this week, I think videos and pictures say more like words 🙈😎. I wish you all a good start into the week :-) Stay healthy and let it grow 🙏🏻👍

So beautiful..... Full fertilization started with the mix above the epsom salt is granulated so those little white balls are the epsom salt :) The little dried clementine is just decoration ;)

Day 60 of 12/12 HARVEST TIME They are soooo fine I barely have words. Weak-neck gland trait is a fact. I was collecting FRESH, "WET" (non-dried) flowers for Fresh Frozen - the amount of trichome heads just breaking off during that process was astounding. Air was full of trichome heads every time I touched a branch or a bud. I repeat - it was non-dried flowers, straight from a branch, from alive, watered plant - and I collected a few grams of loose heads in my TrimBin. Crazy stuff. I also pressed it and I got top-shelf rosin - without dryiyng and sieving or bubble ice wash. Mind blown 🤯 8 plants 60 days (8.5 weeks) of flowering under 12/12 4x4 ft tent 466W Mars Hydro light = 2166g of Whole Plant Fresh Frozen material (just trimmed buds + some trichome-covered leaves) Now floweres are in deep freeze -36°C waiting to be washed for bubble hash and pressed into live rosin in the near future.

Day 1 I don't understand why her growth is progressing so slowly; it seems like she's being rather lazy about it, and I have a gut feeling that she is growing slowly because of the humidity PH 6.0 EC 0.6 DLI /19h / PPFD / Water 25c Day 2 Refresh the water and add 10 L nuts PH 5.8 EC 0.8 DLI /19h / PPFD / Water 25c Day 3 PH 6.2/5.8 EC 0.8 DLI /19h / PPFD / Water 23c Day 4 Thu Add AC water to lower the EC PH 6.2/5.8 EC 0.9/0.7 DLI /19h / PPFD / Water 22c Day 5 Fri Add AC water PH 6.1/5.9 EC 0.8/0.7 DLI /19h / PPFD / Water 23c Day 6 Sat PH 5.9 EC 0.8 DLI /19h / PPFD / Water 21c Day 7 Sun PH 5.9 EC 0.8 DLI /19h / PPFD / Water 21c

Think I must have forgotten to feed the cutting at the back at some stage. You can see in the timelapse she struggled for a while before bouncing back after a good watering. I never expected all 3 cuttings to make it to the flowering tent anyway, so that plant will be the one that is most likely to not make the cut. Hope you all enjoy my first attempt at a 1 week timelapse. I'll intend to record the whole grow this way so follow along for updates and please let me know any tips/tricks any of you may have for recording / editing. Happy growing, happy smoking!

"Hi, I received my pH meter this week, so from week 6 onwards, I'm aiming for a pH value of 6.0 - 6.5. This week, I noticed that the plant in the small pot received too much fertilizer. The other two 7.5-liter fabric pots also received double the recommended amount according to the feeding schedule, but they don't show any signs of over-fertilization."

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room. With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation. But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.

Lampe

Looks like the Gorilla Zkittles is pretty much ready the colours are amazing definitely keeping this pheno. Nothing changed this week apart from a change to water, calmag & canna flush @pH 6.2 I have noticed thee THC glands are brown already you can visibly see them absolutely insane cant wait to smoke it.