Likes
Comments
Share
@Kushizlez
Follow
Day 35-42 (June 4th - June 11th) (Day 36) After it stops raining I’m going to amend some 2 gallon pots and get some of these clones planted. Tuna recovered nicely from topping. The wind keeps impaling the slurricane leaves on the mini garden stakes. If everything goes to plan, I will be transplanting all the slurricanes and tunas into 5 gallon fabric pots on the 21st. If they recover nicely I will flip them on the 30th. (Day 37) It’s looking like I fucked these autos up pretty bad with the hot soil mix and low night temps. It was a dumb idea to sow directly into amended soil. I guess I’ll just leave them and see if they can push through the nutes. The 4 meatbreaths I’m going to transplant into 3 gallon smart pots in a few days. They won’t be transplanted into their final containers until the 10th of next month. (Day 39) God I wish this rain would fuck off soon. I want to get some of these clones transplanted but can’t in the rain. Forecast says sun for the next few days then more goddamn rain. None of these plants are liking these low night temps. It’s currently 6 degrees (42f) which is guaranteed stunting. Zone 3 problems..... I honestly should have waited a little bit before planting the autos too. (Day 41) Weather finally let up. Got all of these clones and meatbreath’s in their new homes and looking happy. (Day 42) The gelato 33 autos are definitely doing better than all the rest for some reason. Grapefruit, Dr seedsman and exodus cheese haven’t even pushed their second set of leaves yet. Their containers are definitely too hot for seedlings but I will just leave them and hope they recover. Maybe the gelatos are just heavier feeders. Next year I’m going to establish the autos in coco before I put them outside. Or just start them outside in coco and transplant.
Likes
Comments
Share
The plants are looking really healthy, I've been defoliating here and there to get the light to penetrate to the lower leaves and branches. They have started to bush out from topping them last week. I started using Mammoth P Microbes halfway through last week. They seem to have grown a little quicker since adding them. The plants are still being fed 4 times a day at 1 minute each feeding. No signs yet of which is female and male, I am planning on pulling all the males once they show signs.
Likes
15
Share
We are in the middle of week 7 and flowering has started about 4 days ago. Big gal started budding 2 weeks ago.
Likes
61
Share
Hello all! I am finally back online and so here is a proper update for the Queen! Citronella has suffered terribly during the house move and following weeks, a few days ago I took her lower third off and defoliated and removed underdeveloped nodes. I dried the popcorn I took off during this process and got 12g (dry). The rest I am leaving on her and hoping and praying those buds swell. The smell is absolutely the greatest thing ever, she is stunningly pungent - even the quick dried popcorn is really beautiful to smoke - so whatever I get from her, whatever little it will be, I will certainly enjoy. Anyway she is now being taken care of a bit more regularly and properly and moving forward until harvest I expect this to continue. Day 109: Fertigated 10l Day 111: The queen is maturing, but I am not sure her buds are going to get much fatter at this point. She is already struggling to hold them up, they must be really dense if they are so heavy this small. I am really at a disappointed stage with this grow, and I must do better next time I grow this strain. I am not impressed with this LED light, I think I need to grow a full tent under my better light and see how they do. Anyway she is trundling along and I don't think too far from the inevitably disappointing harvest.
Likes
29
Share
These girls are wild. I did a Trichome check yesterday and I don't have many clear ones they are almost ready to go. I'm still taking off larger vegetation getting in the way of lights and air circulation. I've also increased my intake fan to cool down my tent more and my heater has been off for weeks. The buds are extremely dense and sticky and they're giving off a wicked aroma. Very pleased with this strain and the ease of this grow. I'm feeding full strength calmag (0-0-0) and sulfur-free blackstrap molasses every watering with very small dose of a p-k booster every third watering. Im also using Orca liquid mycorrhizal as much as I can.
Likes
8
Share
@ProKush27
Follow
By the start of the week I’ve noticed magnesium deficiency on plant A and B, so I started adding Biobizz Calmag on Froglord’s kind recommendation. Otherwise I started slow defoliation process and I’m currently removing around two leaves per day. Plants definitely grew larger than expected but I’m not mad :D. They’re taking a bit longer, but it should be worth it. I’m expecting harvest on plants C and D soon.
Likes
21
Share
End of week 5 - Night 41 Added a couple videos, one from the side of the buds and one from the back (LST) things are going well for this plant now, it may only be 15-18cm but its flowering stronger than my other plants. the smell is just getting more pure and strong every day :) and its getting frostier too :D so excited! I have to grab myself a magnifying glass of sorts on monday to try and estimate when harvest will be :o
Likes
4
Share
Likes
6
Share
All the girls looking good all have bud forming on their tops this strain has been really with no problems at all. All except one has staid short and bushy the one topped stretched up and fanned out real nice
Likes
75
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We were expecting around 600-700grams but got just over 540.. not unhappy at all lol..the berry terps are very strong with this batch, we've grown this stain several times but this is our first grow under the FC-E6500, buds are hard and resinous. This was a great harvest and should get us all through the next few months..Thanks as always for dropping by and happy harvests everyone!!! 💡🌱 ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
21
Share
@Whitebelt
Follow
Week 8 - second week of flower One plant is much smaller - still not confident on sex of any of them ... maybe that small one is a male - I’m guessing they’re all female tho. Either way i may need to slaughter that little guy - the other plants are just overtaking the tent - might not be worth keeping that little one in there. Update 6/5/19 - I’ll take some updated pics tomorrow - I’m 95% sure I have FOUR out of four female plants. Just picked up some yucca to try - and I got some more led hangers so maybe I’ll upgrade the lights today - the rapidLED far red flower initiator isn’t coming until Wednesday unfortunately but I have two more SolStix I could add. Update 6/5/19 - far red flower initiator and the two (now 4) solstix are installed - I need to make a simple aluminum frame - maybe this weekend Picked up some 29% H202 to clean the rez tank and pumps and filter etc (not to put in the nutes for the plants tho!) Got a better air pump and airstone for the rez. New Vivosun oscillating fan - wtf!? Made for grow tents but can’t turn without stopping on the sides of the tent!? - I emailed them maybe it’s defective.
Likes
24
Share
@Doubleb84
Follow
Running into some rookie mistakes with PH and nutrients 😫. Getting her healthy again with help from friends though! Love this light so much!!
Likes
3
Share
@LAShugars
Follow
Going to stop giving her nutes. I think she’ll be ready in 2 weeks. She’s been an easy grow. Her smell, colors and bud density are wonder
Likes
6
Share
@Weedzoks
Follow
Flo 22: Arrosage engrais complets Flo 26: Arrosage engrais complets
Likes
29
Share
Hi guys So into week 4 now for these 10 autos under the marshydro tsl2000. Some are bigger than others but all looking healthy. I ran out of pegs for my lst so I put up a scrog net. I wont keep it on full time only u till the plants have developed and stretched enough for me to remove it. By the end of the week they should be nice and stretched and ill just keep tucking them lol
Likes
8
Share
Next week harvest! 🔥
Likes
4
Share
@Jaschkoo0
Follow
Nice buds but the Werther is 28 to 39 degrees so it Hot dry very fast. Not good it lost a lot of terps.
Likes
23
Share
Plants are now reaching the final ripening stage, showing extremely heavy trichome production and fully developed flower structure across the canopy. Several phenotypes are displaying darker coloration while resin coverage continues increasing day by day. Most pistils have started to mature and calyx swelling is becoming more noticeable, giving the buds a denser and more compact appearance as harvest approaches. Feeding is now being reduced gradually, with Bio Flores remaining as the base nutrient alongside Hungry Bacter, Glutton Bloom and the final applications of Ultra Booster before entering the finishing phase. The aroma has intensified significantly during this stage and overall plant health remains excellent heading into the final stretch before harvest 🔥