Processing
Likes
Comments
Share
@Cysolja
Follow
Budsites have fattened up beautifully she’s growing fast and is loving the nutrients at the minute can’t get enough !
Likes
17
Share
14/12/20 inicio de semana, se le aplico dos cucharadas de leonardita y dos mas de harina de cangrejo riegos solo con agua, se metio al invernadero una led bestva 600w elite tanbien se rego con un poco de algantic potasium se le relleno con 4cm de sustrato se le ato las puntas del apical alas hojas de abajo 15/12/20 55cm de altura 18/12/20 ya cuenta con 58cm de altura 20/12/20 cierre de semana asta la fecha riegos solo con agua
Likes
6
Share
@burnout
Follow
That's a wrap. Long time in veg due to cold wet soil, but turned around for some decent buds. The White Gold plants could have gone for another week or longer, Papaya Bang Bang was getting past its peak so decided to take them all down today. Be back in a couple of weeks for weights after drying and trimming .
Likes
14
Share
@GhostByte
Follow
9/7 She was showing me about 10% amber, so i decided it was time to hang her. I dont have hanging scale yet, might get one today actually. She was quite easy to grow. Ill keep updates here on the drying process. 14/7 she is drying nicely, still in the wet side after 6 days of drying. Nice and slowly does it. I hate the waiting game in the drying process. I want to light her up and see whats shes made of. :)
Likes
1
Share
Another week down. They still haven't recovered in their root zone starting to get pretty irritated don't understand why they aren't bouncing back 04/08 watered in 2 gallons with goodies
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
4
Share
Cherry Strudel, filling the net out well. Definitely not a stretcher, looks like I should hopefully get some nice nugs, I’m looking forward to seeing how the terps come through.
Likes
5
Share
Olor a natillas de chocolate Segunda semana en la que siguen saliendo setas 🍄 en el sustrato 🔝
Likes
4
Share
This week was a real breeze! She's gaining a ton of weight on the bud sites and she's really growing nicely! She's starting to bud around the flowering sites and really finishing nicely. The formation of bracks and the formation of the buds is my favorite part because that's when you get to see somewhat of the final picture and the time the flower is most colorful! Now the second best part is harvesting the flower for smoking which will be occuring soon! The smell on these girls is very invigorating!! She's putting out a smell of a Apple Tart! You can smell the Apple Strudel right away when you open up the tent! I can't believe how big she's got and how beautiful they are coming along! I have to say that this is one of my favorites to grow and my favorite smelling strain! I also love the way the flowers are stacking on the colas!!! The frost on top of the cola leaves is insane! During the day I drop the humidity down to 45-50% and then at night I raise the humidity up to 60-65% which helps a ton with flower promotion during the flowering stage! Also, I raise the temperature during the day to 80° and at night I lower the temperature to 55°-60° which helps mimic the autumn temperatures that aids a ton in flower production in the flowering stage!!! I'll be stopping the two Apple Strudel Auto's from receiving any synthetic nutrients soon and flushing them once harvest is closer. It will be within the next two weeks or so! I do that because they'll stop taking nutrients in and start to self canabulize as a normal (ending) part of plant life. Then I'll give the two ladies plain pH balanced H20 for the next 2 weeks to flush any and all nutrients out of them. Then three days of darkness. Finally I'll chop them down to hang in my harvesting closet for 7-14 days with a dehumidifier on at 65% humidity. Then I'll place the flower into the trimmer and then into the grove bags for the last step in harvesting! The grove bags will keep the flower at 58-62% humidity. They also help keep the flower fresh longer, the Terpenes fresh, the Terpenes flavors, and from becoming moldy or dried out! I've used both these and the mason jars with boveda humidity packs but to me the grove bags are a must and a go to fail safe!!! All you do is hang your buds upside down at 60/60 or 65/60 for 7-10 days or until the braches snap and make that noise. Thanks and as always stay safe, stay high, and stay blessed!
Likes
12
Share
@gr3g4l
Follow
dia 3 volví a cortar un par de hojas más de arriba del todo . esta semana seguimos con el tratamiento anti araña roja con Solabiol como preventivo, no he visto ni una y así espero que siga siendo.
Processing
Likes
19
Share
@lukavega
Follow
This is more of an equipment gathering project-first grow so I want to keep it simple and budget friendly, I ordered autos for my first grow but Oregon Elite Seeds sent a free gorilla Girl from Sweet Seeds. Super psyched for my first grow! Day1. Soaked seeds for 4 hours in bottled water, used paper towel method with 100% sprouts within 18 hours inside dark tent at 80 degrees (heater and air purifier) and 40% humidity. Hoping to plant directly into prepared soil (6.9 ph currently) in 24 hours. Day 2. Planted Critical OG Kush and Blackberry Autos 1/4 directly into 8 gallon cloth pots (these are the wrong pots-they are wax lined but the pandemic made getting the aeration pots unavailable-I may have to transfer later). Very lightly watered. i prepared my soil mix and had it acclamated to the grow room. I opened the air vents at each end of the grow room and set heat to 78, placed a bowl of water for humidity and started oscillating fan for airflow. Planted Gorilla Girl in a tupperware dish till i can get something more suitable. I really need another light but shipping just isn't working out. Day 4: 1 OG Critical was culled do to lack of progress. Gorilla Girl hs been repotted and looks fine. The Blackberry are much leggier than the others at this point. I'm watering just enough to get to the roots with bottled spring water. Day5 : the girls just woke up-posted pics. 1 light and 6 plants is not ideal. I'm not sure if I should put the strain that is naturally shorter under the light directly or focus on the tall ones getting enough light to not stretch. Comments appreciated. Day 6: Ligthts off after a 20 hour on cycle. I was concerned that my light insn't adequate spacially. I dropped it down to 15 inches above the seedling and got it tropical in the tent. I also used a 6500k 15 watt shop light for added light color and they enjoyed it, except for 1 had a bit of yellow. I will post photos when they wake up to see how they look after this light/heat/water boost for 20 hours. My Gorilla Girl is the only one that isn't above 2 inches. That one was planted deeper (1 inch instead of1/4th like the others. I did have some "seed helmets" so next time I will go a little over 1/4 inch deep. Qweeby's roots grew like a wad instead of down. I've had to readjust her placement twice because the roots act like they want to be on the surface. I'm excited to see them in 4 hours. I may cull one and start a different seed. The Blackberry Kush is stretchy which seems nice for a new grower like me. I am trying to limit the stretch so they match the Critical OG height but they are hearty toddlers. Day 7: Added a 3000w LED off ebay. I didn't account for the rise in heat but it only got up to 84. Raised it from 18" to 20" and got more air flowing through. One plant has a little yellowing from the inside of the main leaves (inside to out) but it's barely there so I'm going to check PH meter and easy watering since yesterday I did water more then I have thus far-so it could be a little root lock from too much water.
Likes
12
Share
@Rob96
Follow
Pleased with this plant overall although it has grown much higher than the others it has still been manageable and this last couple of weeks has really really started to fill these long stems nicely. Has a really strong nice smell so all seems to be going well and looking forward to see how much fatter it fills out these last couple of week, will be flushing from next week getting ready for the cut, can’t wait till all done and get to enjoy all these buds
Processing
Likes
11
Share
@MRTHC
Follow
Thanks for tuning in again. The ladies have been flipped. Few days before i have been adjusting my light schedule by reducing the light period by 15 every day to get them accustom to the longer nights. must say that the RH in the tent which used to be around 65 on a good day is now around 70%. Will have to ring out the dehumidifier. They are still on the same water regime but i think during this flower period they consume more water. Also I am unsure how to properly defoliate these ladies. So much mixed literature on the topic. I need to though as the girls are getting bushy and I have found some leaves on laying on top of other leaves and forming wet surfaces. A prime environment for PM and other shit that wanna mess with my harvest.
Likes
15
Share
4/6/2024 - Vegetation Week 8 Day 1- Last week in VEG, They are all looking amazing and no worry about stretch when I flip Next Saturday they are indica and I have more than 50% of distance from the top of the plant to the lights with a little more I can raise the lights if necessary. So going to really just enjoy this last week of VEG, and get my Cloning equipment ready. I will be taking 2 cuts for each this is also a PHENO hunt for HWG and he not only has the prize for the winner but he also has an additional bounty on a cut of the winner. I did have to take some from around the edges to keep them from touching. 4/7/2024 - Vegetation Week 8 Day 2- Didn't do anything today but watch them grow.. They will be getting a really good flip trim and clean up for clone material on Friday/ Saturday. 4/8/2024 - Vegetation Week 8 Day 3- Couldn't even get a picture of the #1 at first too much Foliage throughout.. So I had to clean that up and make sure they all still have some separation before flip. 4/9/2024 - Vegetation Week 8 Day 4- Huston we almost had an issue.. I looked at my Res and she was in desperate need of 10 gallons to get her through until next water change on Saturday. So I added 10 gallons and the Nutes. I added 10 Gallons of Water I added the following Nutes: CalMag= 1.00Mil/Gal= 10Mil FloraMicro = 5.4Mil/Gal= 54Mil FloraGro= 4.2Mil/Gal= 42Mil FLoraBloom= 4.6Mil/Gal= 46Mil 4/10/2024 - Vegetation Week 8 Day 5- Had to giver them a huge clean up today I couldn't even see the numbers in the first pic. I am also worried that #1 and #3 really, really are getting huge over the last few days.. starting to think I should have flipped them this past Saturday.. The interesting things is even though this is an Indica Strain, I might have to super crop just to keep them off the lights. The joys and sorrows of RDWC and timing. 4/11/2024 - Vegetation Week 8 Day 6- Even though Flipping in Two days almost wish I would have gone at Week 7. I am really worried about #3, #1 and #2 are huge and when I put them in flower they are going to stretch out 4/12/2024 - Vegetation Week 8 Day 7- Day of Work.. Lots of Work.. I gave all three a Cloning/Flower cleaning.. all three got cleaned up top Inside and bottom, I took 2 cuts of each to see which one come out on top then I will kill off the other cuts once I have a winner in flower. I clean up this thoroughly before I flip because it reduces the work load on the next major clean up I do on Week 4 of Flower.and they are so much taller that it is going to be a pain in the ass to maintain canopy space for #3, we will see how it goes and adjust as necessary..
Likes
6
Share
One more week and she should be in flowering excited to see how she does been leaf tucking and lst best I can wish main stem was longer but hey it is what it is :)
Likes
5
Share
Im learning with this coco and the watering Im trying to improve this as I am allways over watering . She was deffo ready today as the leaves were wilting so shes had a good drink about 3 litres. The shogun nutrients seems to be amazing no deficiencies and super growth. I had too many plants in my tent so have reorganised everything to improve their health
Likes
2
Share
@For2itous
Follow
Girls really starting to fill out and gain height. Starting to see pre flower so switching light and feed schedule to flower.
Likes
35
Share
What up gromies. I'm back here to put this diary to rest with a harvest and smoke report. After 14 day dry and 30+ day cure these flowers are ready for enjoyment. Purple Cookies from GFS grew short and compact finishing in just 9 weeks from seed to harvest. No sign of purple in this pheno but would you look at the quality here? Amazing structure and trichome production. Everything that I've grown from Ganja farmer seeds has been really impressive. I will continue growing their genetics.👊😁💨
Likes
2
Share
En esta nueva semana, he subido la dosis de Bio-Grow 1ml/l más, la planta en sí a desarrollado un tronco grueso con multitud de ramas, el crecimiento está siendo bastante rápido y no está creando demasiadas hojas. En 1 o 2 semanas como mucho, esta Gelato empezará a tirar pistilos, lo que nos anuncia que pronto podremos catarla jajaja. Dulces fumadas maquinas.💀.
Likes
33
Share
@BudXs
Follow
I will be vegging for a while still, autos will probably finish before I flip the clones that are still not rooted at 10 days. Coco has been a real issue for me this season, two bags both full of salt and killed off all seedlings and 4 stable saplings. Very bad things to say about Cana Coco and I will be abruptly changing my set up from Dutch buckets to boring old soilless mix, top fed from my exterior reservoir. Will be poking MANY holes (speedholes) in my containers and mixing a tonne of perlite into my mix so I can hopefully fertigate every 3 days Fingerblast the like button