My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip

New light installed, twice as powerful as before but still a cheap light I've yet to learn fully Like the first batch of seeds to germinate, I again get a strange 'quad' seedling, 4 embryo leaves, then attempts to grow it's first 4 leaves instead of 2 also, growth is severely stunted in both seedlings to start with 4 embryo leaves after seed popped

Second week in stretch training a bit more with the net.

Today I trimmed the tops of the plants. development is good. Tomorrow I will increase the amount of light. Day 14. Tomorrow I will start spraying with Delta 9 and get ready to start flowering. Let's move on. =)

Day 52 - Deep Jealousy Auto from @anesiaseeds Nutrients: @atami_deutschland / @atami.international / @stefan_atami / @daniel_atami Soil: @promixgrowers_eur / @promixgrowers_global / @promixgrowers_unfiltered / @promixmitch LED: @powerlux_spain Tent: @secretjardin_ Thank you to everyone who follows and supports my work 🙏🏻💚 This means a lot to me and you should know you are a part of it and only with you all this is possible, you are the best community 😎 Growers love, love for everyone

Hello. I've harvested the Mega Mouth. WOW!!! I'm very impressed with this strain. Over 1.5 k for 5 plants. and it was finished by Aug 20 with the tents help. I'm trying some new (for me) categories to add to my report. Plant Stretch (PS) 1 to 5- 1 is hardly any stretch. Bud Mutation (BM) 1 to 5- 1 is a beautiful normal bud- 5 is big weird growths like foxtails. Trim- How easy or hard it was to trim up 1- you blow on the branch and hang it up. 5- Is very hard to trim takes a long time. About- Best guess on the THC % (I've been smoking a long time) Resin- 1 is super slippery 5- is very sticky like Gorilla Glue. Size of Buds (SOB) 1- is very small 5- is the biggest buds Dense- 1- is the lightest or fluffiest 5- is the rock hard buds your bud buster has trouble busting up. Plant #1 Wet Trim 1647 g PS. 3.5 BM 3.5 Trim 4 About 21% Resin 4 SoB 4 Dense 4 Finished Dry Weight 289.5 g or 10.33 oz. Plant #2 Wet trim 1606 g PS 3,5 BM 3.9 Trim 4 About 22% Resin 3 SoB 4.7 Dense 4.3 Finished Dry Weight- 302 g or 10.78 oz. Plant #3 Wet Trim 1635 g PS 3.7 BM 3 Trim 2.8 About 20% Resin 2.8 SoB 3.7 Dense 4.5 Finished Dry Weight- 314 g or 11.21 oz. Plant #4 Wet Trim 1753 g PS 2.5 BM 2.5 Trim 3 About 22% Resin 4 Falls off easily- Clumpy Dense 2.5 Final Dry Weight- 343.5 g or 12.26 oz. Plant #5- Wet Trim 1787 g PS 3.5 BM 3.7 Trim 3 About 24% Resin 2.5 Dense 2.5 Finished Dry Weight- 355.5 g or 12.69 oz. The taste is sweet and smooth to go down with a nice balanced buzz. There was some pests around. I found thrips damage in veg and got some Spinosad to take care of that. Saw some fungus gnats around but they didn't do much damage. Easy to grow and trim. This is a recommended strain. Chuck.

Tops rock rock hard .had to put strings cos they was falling cos of the weight. I think is comimg to the end and stressing me out cos first time doing it .dont wona start to flush to early ....any help would be much pri...started looking at the trichomes every day now

Stretching so good

Some more photos. ✌️

Day 21 also known as week 3, everything looking great even the lil cute white widow

I'll be doing the update day by day now. First day of the week: I started her 2 weeks flush today, I measured the ppm, and my water without nutrients has around 200 ppm. She's doing fine, one friend said those colas are going to double their sizes. Does anybody think this as well? Second day: all ok Third day: all ok Fourth day: this was the day the kid cried and momma wasn't there... I found mould in the main cola. I removed it asap. Hope it's no going to spread. The umidity wasn't high. Don't know what happened. I'm in pieces

Week 4, 22/3/2020 - 29/3/2020, as seen in the pics the growth since last week was tremendous. She's gained 4 times her mass and she very healthy. Of course increased the nutrient strength this week and the watering. This week will water 4 times per day for 45 mins each time.

I harvested them about a week apart. Neither one was as bulky as I hoped for, but they both frosted over incredibly well and smell a little bit like black cherry (one of the genetic donors)..but it's also a little like a burgundy wine flavor on the exhale. Very appropriately named! Plant A: 80g Plant B: 88g It's dried up into some really tight, beautifully dense nuggs. Between both plants I got about another 30g's of lower/larfy bud that I'll press for the rosin in another day or two. This strain is pure magic to grow...nothing to it really. They happily eat up whatever nutes you give them and aren't light-sensitive in the least. They stretched a little more than 3 feet from the time they were switched to flower and both plants reached 4' in total. Slightly more space between the nodes than the Sucrose Overdose, but they filled in nicely. They have a very mild aroma while growing, but it smells delightful in a jar. One pheno had "praying" fan leaves from the get-go, all the way to the end...never drooped..not even at night. It didn't have the more red coloration in the foliage and stems like the other one. But a real beauty just the same.😍 I still have one of these beans that I'll run next Fall..and prolly clone the hell out of it..👍. Special thanks to Wicked_Stix for his idea to breed this hybrid, and the magic beans!!!!!! I'll update with my smoke test and final thoughts next week some time.

03/15/2021 Reppoting of GSC done I used Bonide(4-10-3) Root&Grow with iba! to lessen shock of transplant and heavy defoliating. Flipping to 12-12 today (the first clones will be for outdoors) made before and after videos of defoliation, and reppot. Blue Dream is cruising along nicely with a little LST bending of branches & stems,so all in all not a bad week..

Big textwall incoming homies: Here Im doin some shit i knew from owning low to middle branded smd grow panels* how is that usually they come with both uv , ir, far red even newer quantum boards supplements itself with diverse chips extending their photosynthetic spectrum or making specific accesory bars / modules yet my purporse is rather focus on UV as this 15w bar (advertised as nominal 9 x 3w powered led) with UV-A 390-400nm spectrum – something that trigger some reaction to the plants with some other color son the flowering phase and trying to establish functional a ratio , as a bit of blue green and yellow have specific purposes instead of providing absurd quantities of red light , as there is some lateral cold bulbs in smaller but necessary ratios (as blue spectrum is still required on flowering , yet the original purpose was to complement mid to low branch development) in this shitty set up bonding with the upper bulbs and their colour temperature schema, every light has it's own schedule as how i suppose is a morning to night as something that cause plant resistance response (kinda noticed something i need to stimulate as i see a bit of fox-tailing but now with the uv-a i propose to build resistance and activate defense mechanisms like resin and of course, plant morphology according to its stage making bulkier , tankier , according to outdoor’s atmosphere i want to replicate as optimal weather as well – i hope this hardship make them more resilient and increase their health points as here i’s a HOT GIRL SUMMER- even indoors it rises my base temperature makes smell notorious, but as is not the usual weed smell make it and advantage in terms of discretion Killer Kush presents slight sweet tones not very prominent, the only herbal smell can be associated to pine undermining the refined coffee-like smell that is the dominant note (this selection of kush lack of lemon notes up to this point i can say it’s earthy with a bit of sour & sweetness) . Alas, as their late flowering phase and feeding schema should make chunky girls ,but the hot girl summer can become really a issue here, days and heat is something to be deal and prevent more light and food that they can chew , and this timing make me not over-do this niggas with excess of light, heat, disbalanced spectrum or extractions. So automatizing it with some timers ( a very good hint to repurpose old shit in your house!) im doing a Schedule that turn off some lights through the course of the day switching the intensity and the spectrum itself , making a sweet morning to afternoon look alike , , making that timer looks really like a basement like a nice dream to my plants, not exposing them to very disfavourable conditions and yet controlling my electric bill peaking , by the same reason , ventilation is also measured as im relying just on ventilators to distribute and disperse heat and also doing the role of intraction / extractors, there are 9 usb fans in various levels of this weed maze <3 . It's noticeable the quick evolution of these plants as there is no other factors to be aware except heat management as plants seem with not negative traces except some burnt leaf from previous weeks so i expect that they should be ready at the end of the month by my a personal mania of ripping shit all at once in order all to have that space at disposition for new projets , i will report stability eventually as they seemed quite rare enough when before putting to flower all, there was one already flowering AND THAT WAS FUCK THIS SHIT AND BECAUSE ITS NO CHEAP BULK TO EXPECT THIS SHIT!** ), and that shit become tears in the rain as that put me in some shit i can’t control or overcome, and just deal with in this strange lst bondage metal succubus nightmare that will be a nightmare to unmount too. Yet, i want the best conditions for her as all plants except her are ok so now the lateral bulbs also switched to give her more light (there is one on the left, right and on the back side, but i think better results with a neutral colour and using t5 led tubes with a water resistant case in each corner of the tent if i try to re do lateral lights ! ) *I still own the panels, in a next future, but not in this run i can use them as i think how i can supplement them and make them a team player as beyonding spectrum shaman shit i know now , and thankful to the chinese kids that made these fucking cheap as hell blessed bulbs,as they made me allow quickly adapt the spectrum on the main setup is 3000-4000k at the same ratio, with the addition of a cold light of 6500k on the idea of middle branching development too , and a small pint of unholy uv doing early 2000s cyberpunk shit with old trash janitor with compulsive hoarding stuff with some big gas leaks attitude niggas . **I do second runs of plants in order reach a better result through practice - but is noticeable the lack of stability on these bastards as i was very happy with previous strains i can say this strain is a big no! , unlike their famous ones, like black Jack or sweet cheese , the former ones fast version are way more stable and they didn’t presented me autoflowering phenos in the batch … i don’t hate autos, but i hate to mix them with feminized on the same run, its like having a hermaphrodite indoors for me. 😫😫😫

I mean this genetics it's excellent ... if I would grow zombie kush again ... good job ripper seed ... she fought and was very strong against the plagues after a beginning outdoors ... she fought against the white fly. worms .. red spider and other insects ... and deserves your recognition ... it will not be the most beautiful plant with its leaves impeccable ... but she is a champion ... thank you ripper seed .. .

Flushed and getting ready towards harvest

.

Week 4, May 2 to 8/20**********Days 22 to 28 from germination********* Fighting pH with numbers of 7.1 still coming out after putting in 4.5 for days and never given over 6.1 from the start?? Its time to rule out the damn pots as the issue because there is simply nothing else left......coco with perlite flushed from the start.....feed never over 6.1?????? How is run off staying so high even after several waterings of 4.5pH. They are only three weeks when this issue became apparent. I had cut slits in the bottom of the pots to aid in further drainage???? I transplanted the Fast Buds girls into 3 gal plastic pots. They are fighting the pH issues more than the other girls and will I pick on the weaker ones.......unfortunately its these ones. Plus since GSC is a longer running strain In this grow I figured these girls may have the most time to make up from any shock. GSC went well and she came out of the fabric pot well and into the new one. They were both exactly 10” across so I cut the whole fabric pot in half with razor knife while holding together. First girl fell right down in and went okay!!!! Cool👍👍👍 GSC2 on the other hand had more of an F U attitude about it all😡 Followed the same process but she didn’t’ come right apart nicely like the first one. She fought one side of the pot and in hind sight I should have cut a plus symbol or star pattern in the bottom of the pot rather than just the one slice.......It wouldn’t give right on the bottom of the pot on one side. When it finally did the roots came up from the bottom and she was flipped inside the medium..........basically worst case scenario 🤬🤬🤬 So what can you do.......you show her some extra love❤️ and talk softly to her😚 and promise to make her healthy👊 and strong💪 and never to hurt her agian😍😍🤞 Little more detail......... May 2/20 - Day 22 - 2L feed for each girl with CalMag @ 0.5ml, Vitathrive, Sensyzime, Piranha, Voodoo, Dual Fuel @ 1ml = 625ppm and 5.0pH - runoff numbers: - GSC 590ppm with 7.3pH - GSC2 580ppm with 7.2pH - why so high damn it?? May 3/20 - Day 23 - 6L mixed with Vitathrive, VeloKelp, Sensyzime @ 2ml, Piranha, Voodoo @ 1ml = 165ppm and 5.0pH - 3L given to each girl. - GSC girls have perked up the last three days. - GSC2 is getting wider but not taller. - Runoff numbers: - GSC - 725ppm and 6.9pH - GSC2 - 650ppm and 6.8pH - thinking that cheap fabric pots are the issue with high pH I am going to transplant two of the four girls into plastic pots and see how that goes. - GSC transplant went well. - GSC2 transplant not so well.......she caught the edge coming out of the old pot and her root mass became all twisted😞😞😞 May 4/20 - Day 24 - dry out day and leave them alone after being so shook up yesterday. May 5/20 - Day 25 - gave a small plain water feed of 2L each with ph to 5.0 - water and left them alone again today. May 6/20 - Day 26 - Feed day again. 1.5L each for each girl with Dual Fuel, Vitathrive @ 1ml, CalMag, VeloKelp @ 0.5ml = 675ppm and 5.1pH - the girls are working through it......just give them time. May 7/20 - Day 27 - simple feed today with VeloKelp @ 1ml and Sensyzime @ 2ml = 165ppm and 5.0pH - each girl given 1L. - GSC is looking like she is fighting back and starting to see her increase in size. - GSC2 is also coming along because her dying leaves are also starting to perk up. - Did some some stem twisting on GSC to help strengthen her stock. May 8/20 - Day 28 - Dry out day - The girls are doing well with the Kelp and while they are not much bigger they look healthier! - GSC2 low branches are not sitting in soil anymore👍 Cheers Growmies........have a great week!!!!!

D50/FD22 - Right, water change day (Evening). Right and proper f**ked off with the light doing me over (See D49/FD21 Comment for that epic story!!!). Where stretch had stopped (I thought), plants are back in the lights AGAIN!!! Blaming the light giving a near 24hour session and some other broken sessions of light over the last 48 hours!!! So had to pull out the extraction as getting LED burn on leaves that are touching! Blowing through the Carbon Filter and can't really smell anything so that's not bad. Everything a wee bit noisier with the fan not being muffled in the tent but need the space and got around a foot. Not prefiltering the fan as I have the new Cloudline to go in for next grow. Hopefully they grow no more and its all thickening buds from here so as I have space for the UVB in there in a week or 2! Slight change in feed. Dropped the roots booster as Wilma can't take any more...its full!!! Dunno how I am still getting 50L of water in there!!! Added PK9/18 (At half strength). Should probs drop the calmag (Or Kind Base down a bit) to drop nitrogen but am still seeing some copper spots here and there that looks like wee calcium deficiencies (Not much, but its there) - I do have some BioBizz CalMag (Which is Nitrogen Free) but it leaves the tank stinking with precipitate and dirties the roots. Think this is the 1st grow I have had where all the stems staying green so plants generally healthy. Cherry Pie still not budding up as quickly or as thickly as the Red hot Cookies but looks like its maybe running only a couple of days behind in growth so no biggie. Few weeks left for it to catch up and surprise me at the end! 😁 Red Hot Cookies is at the races for budding...even seeing pistils colouring a bit already (Dunno if thats good or bad!!!). Now just to make sure I see no signs of re-veg...as per the D49/FD21 comment, I'll be scowling at GeekLight this week. Digital Timer in there now to ensure no bleed through - power gets hard cut like old times. Unfortunately though, when the light comes on via power-on (and not app timer mode), UV & IR comes on too so have a timer set to stop it after 1 min (Its about all the app being used for now!!! Apart from turning on my IV at midnight for 4 hours - which is, I have just seen, still working). Think that's all the s**te I have to talk for now! Happy Growing all!!! 💪