Propa first week of flower finish. I change light shedule and now girls have propa night not like before there was a bit of light leaking when they supposed to sleep. This learn me if they sleeping it has to be 100 % of darkness. We learn all our life 🤙

Hallo zusammen 🤙. Sie wächst immer weiter so eine Dehnung hatte ich lange nicht. Das ist das letzte mal ohne Training 🤙😠🤪. Habe die Lampe nur auf 50% laufen hoffe das das gut geht. Trotzdem geile Pflanze 🤤

V8, supuestamente hoy haría transplante a los maceteros definitivos, pero, hace 3 días que las plantas están presentando hojas débiles y dobladas hacia abajo, en un principio pensé en que podría ser exceso de agua, pero creo que es exceso de nutrientes, básicamente exceso de nitrógeno, ya que las hojas están con un verde muy oscuro y algunas están presentando manchas color café. Así que hoy les hice lavado de raíz, con agua EC 0, hasta que el drenaje fue de cercano a 4 EC. Esperaré unos días a ver si se recuperan, si no, simplemente las eliminaré y empezaré de nuevo, ojalá se recuperen. V9, al final si era exceso de nutrientes/nitrógeno, menos mal que se recuperaron con el lavado de raíces, pensé que morirían, ahora veré como siguen para decidir si hago transplante hoy mismo. V10, se realizó trasplante a macetas definitivas y un riego suave. Las plantas están todavía en recuperación, esperaré unos días más para empezar el LST. V12, riego. V13, se realizó una pequeña defoliación y LST.

Photos and video Day 78. Can't control it, temp got a bit higher during day/night. Started low EC feed. Will probably harvest main colas of the gorilla on the right side in 7days(if anyone more experienced can confirm ?). Rest will wait a bit longer (Gorilla on the left and lower buds gorilla on the right). They probably want more light hence its only 150W LED, maybe will try some reds for next run

Hi growers. It's end of week 5 of flowering. So far, all girls looks quite well, only OG is showing that he is missing some zink.. Hope to heal her... Red mandarine is showing her true color as well.. Live that purple!! Stay stoned and keep growing! One love!

There isn’t a ton to report this week other than the two behind my garage are on their stretch, and the one in the garden is bulking up. It has been raining a lot here, I gave all two big dosages of cal/mag and tiger bloom. I figured most of the nutrients were washing through the soil. I haven’t noticed any nute burns, so I’ll likely keep feeding them once a week. I did some bud backbuilding on my garden plant about a week ago, because the other two didn’t look as developed, i snipped the tip of the buds on the other two about two days ago. I think overall I should have a pretty good yield this summer, I wish I had a bit more purple buds, but hey🤷‍♂️ Purple kush none the less. I’m signing out for the week, thanks for tuning in. Cheers.

For now, everything is going okay. Some nutrients shortage, but they are fixed.

Notes Week 18 (week 11 flower) Light settings 12/12 on at 9.00am off at 9.00pm Viparspectra Light power= 75% 165w VPD aim 1.0-1.2 DLI aim 35 Extractor settings temperature 23c with 0c steps Humidity 30% with 0% steps Max speed 10 Min speed 4 Monday 17/7/23 Day 120 (day 74 flower) Looking good. Tuesday 18/7/23 Day 121 (day 75 flower) Defoliate Wednesday 19/7/23 Day 122 (day 76 flower) Harvest all 5 plants. #1 377g Thursday 20/7/23 Day 123 (day 1 dry) Removed some fan leaves. Friday 28/7/23 Day 132 (day 9 dry) #1 FBPHP12, dry 40g. Larf 4g. Friday 11/8/23 Day 146 (day 14 cure) Stop using auto burping system now and burp less frequently for a bit. Saturday 26/8/23 Day 161 (day 29 cure) Sampled. Stats for the grow #1 377g #3 338g #4 276g #5 393g #6 312g Total wet weight =1696g #1 FBPHP12, dry 40g. Larf 4g. #3 FBPHP14, dry 38g. Larf 4g. #4 runtz, dry 29g. Larf 2g. Rot 5g. #5 Pink Rozay, dry 38g. Larf 6g. #6 Candy Rain, dry 34g. Larf 0g. Total dry weight. 179g Total dry larf weight 16g Loads of trim so going run some hash.

Great harvest! Ended up a little shy of 12 ounces from the two plants, all super dense sticky top buds!! It’s smooth, flavorful and strong! Love it!

Whats up brothers and sisters. We have the fourth week of flowering, my beauty has completely recovered from problems with pH. The leaves have returned to their color, the white flower hairs, as you can see, are developing wonderfully. The level of smell has increased, but the manifestation of the smell is yet to come. This is the first time I have dealt with the AutoPot watering system. In the set I use the newest AQUA valve 5, combined with a standard 47 liter tank. WOW !! Friends, I didn't expect it to be so easy and fun to use. I highly recommend it and don't forget to put your AirDome in to your pot ;) Have a nice day, You Lovely Girls Growers :D

This week was great. This runtz from zamnesia recovered good af. Look how she looked last week she was not so healthy^^. I topped her and gave her an lst. Lets see how she grow this week, turned light down to 20hours and maybe next week i let her flower. Have a nice week and thanks for watching my diary✌️✌️

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

Auto Moon rock has been growing slow, but is starting to make progress. The growth looks healthy. A few spots from me getting the leaves wet. Hopefully she does good in the long run. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

July 6: looking good stating week 11. Nice response to the last round of topping to form a 16 cola manifold. After a couple more days of growth I’ll do another scrog layer to open it up further to the sun. So far so good. 👍 July 7: added scrog net. This is tied to half filled water bottles that can move if the plant catches some wind. Main reason at this growth stage is to help expose the growth tips and to hold down the fan leaves. Basically, I’m doing this instead of tomato cages because cannabis plants are tough and a net is better than a metal cage. July 8: hot 33 C today. Extra water, misting during peak sun, and some seaweed extract in the water. Continuing to mist regularly to make up for low humidity. Plant looks nice and green and vigorous. Growing at more than an inch per day now. July 9; hot again. Misting every few hours and foliar of seaweed extract and potassium silicate to help beat the heat. July 10: hot but this should be the peak day. Re-scrogged using a loose scrog layer. The overnight low here was almost 20 C which is super warm. Started another (third) lazy compost tea. Ingredients in a 5 gallon pail are 4 gallons (16 L) of water, compost, shredded coco coir fibre so bacteria have physical media to grow on, 1 tbsp of seaweed extract and humic acid blend, and 0.8 mL/L of Monster Maxx. About 1.5 tbsp of blackstrap molasses. No pH adjustment yet, and will let stand until end of day to allow some bacterial growth. July 12: made it through the heat wave and she looks great this morning.

The tropicanna was meant to be an automatic flower but turned out to he a pheno having to take it out tent at certain time becoming a sore head

Hey everyone 😀. These weeks they have continued to develop very well 👍. They have made a huge leap forward since they were repotted 😃. They will be topped again this week, and will then move to the flower tent next week 😍. I am very curious to see how it will develop until next week. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .