Great run will update after drying

I am done topping plants gonna give them few more days before I transplant them again before I got to flower.

En 2do video se encuentran, MPK #1 #2 y Og cream x gg #1 y Og cream Feno seleccionado. 1/03/24

Season 2 is officially underway and so excited for this grow. Growing 4 plants, but space is a lil limited. Growing in an 80x80cm so using small pots. 2x 8l and then 1x 5l and 1x 4.7l (if you wanna be exact lol). This time I decided to experiment a bit. I'm testing 2 different soils, both in 8l pots, both Purple Punch Auto by Fastbuds, both in airpots. Their names are Robin and Lily. Also testing fabric bags against airpots. Both in same soil, both in 5l pots, both Wild Dwarf Auto by Bulk Seed Bank (that was the plan but now it's 1 WD and another Purple Punch). Their names are Jess and Cece. For this one, Robin, had the seed in water for about 24 hours then in paper towel. Then, into Living Organics soil. If you check the pics, when she popped out the soil, the root was showing also, ouch. But she looks ok now.

Finally, I found the time to finish the report. Thanks for joining me!

I thought the ladies would have another 2-3 weeks left in veg, but started to notice pistils forming within the last couple of days. So flower will most likely start to begin within the next week, I’m guessing I may see a couple oz per plant come harvest day. Not bad for first time grow & using autos, from what I’ve heard a lot of people do not recommend learning with autos due to how quickly their state can change depending on what you do with them. There are some things I wish now I would have done a bit different within the last couple of weeks, I can’t help but wonder how much bigger they’d be if I did not do any defoliation at all. But I have been combating flies bad and made the call to defoliate mainly for that reason. Started to cut back on veg foods and introduce flower foods and sugars to their diet. Humidity levels still at a steady decrease, aiming to have humidity down in the 30s come flower time. Will be going on vacation for a week soon, so fingers crossed that nothing goes wrong. Will be having a good friend of mine come by every couple of days to FaceTime me and make sure everything is handled as well as possible when the time comes.

Vamos familia tercera semana de floración de estás Tropical Zmoothie de SeedStockers. Que ganas tengo de ver el progreso de esta variedad, las plantas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos. Esta semana añadimos nutrientes de la gama Agrobeta. Las plantas están bastante bien ya llevan unas semanas en 12 horas de luz 12 oscuridad. Estas próximas semanas veremos como avanzan. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨.

Hello my beautiful friends 😊 😊 😊 2nd week arrived and he is here 💪 💪 💪 Girls looks very happy and I am happy with them 🙂 Day 9- like you can see on picture a humidifier was temporarily removed. I have to clean and maintain it, so humidity is low but tomorrow unit going back inside 😇 😇 😇 Please have a beautiful day and I wish you all to have a fantastic Christmas 🎄 ♥️ 🌲

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Mid trimmer

Gestern hat die 5te Blütewoche begonnen. Hab jz mal obligatorisch einen Gelbsticker ins Zelt gehangen, falls sich doch mal eine Vieh in meinen Garten verirrt. Aber bis jz immer noch keine Probleme außer 3-4 kleine Fliegen denen ich immer sofort das Leben verkürzt habe. Läuft top. Bilder werden geupdatet.

The plant was harvested and trimmed, yielding a total of 112 grams. Buds are notably dense, pleasantly heavy, and visually striking. Their surface exhibits a green velvet-like shimmer, which may indicate optimal trichome density and light-reflective resin coverage. This supports the hypothesis that late-stage environmental conditions—such as controlled humidity and light spectrum—contributed positively to resin production and bud structure. Further analysis during curing will help validate terpene retention and overall potency. Initial results suggest a successful harvest.

On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd

🥒 Project Blue Tent – Week 4 Pickle Lemon Haze F1 – Pheno B (Folder 14B) Hello everyone, and welcome back to another chapter of Project Blue Tent! 💙🌱 For those joining the adventure for the first time, this project follows four individual plants, each grown under exactly the same conditions while being documented separately from seed to harvest. By giving every phenotype its own diary, we get to appreciate how different personalities can emerge even when genetics, lighting, nutrition, and environment remain identical. Today we're visiting Pickle Lemon Haze F1 – Plant B. ⸻ 🌱 Week Four – Trusting the Process Last week was an exciting one for this beautiful lady. After showing excellent structure and vigorous lower branching, she received her very first topping, redirecting her energy away from a single dominant leader and encouraging a wider, more balanced canopy. This week, however, wasn't about making more cuts or introducing new training techniques. Instead, it was about stepping back. After putting a plant through any high-stress training, I always like to give her time to recover naturally before asking anything else of her. Healthy plants often know exactly what to do when we simply provide the right environment and stay out of their way. Plant B proved that once again. Rather than slowing down, she responded with impressive vigour, pushing both new leaders upward while the surrounding side branches continued filling out beautifully. Sometimes the best training technique is simply patience. ⸻ 🌡️ Environmental Conditions Consistency remains one of the biggest goals inside Project Blue Tent. Stable environmental conditions allow the plants to recover quickly while maintaining uninterrupted vegetative growth. This week's average conditions were: • 🌡️ Day temperature: 27°C • 🌙 Night temperature: 25°C • 💧 Relative humidity: 68% • 🥥 Root zone temperature: 24°C • 💦 Nutrient solution: 18°C • ⚗️ pH: 5.8 • ⚡ EC: 1.88 mS/cm • 💨 CO₂: approximately 450 ppm • 💡 Light schedule: 18/6 The combination of stable temperatures, proper irrigation, and the even light distribution from the Phytonaut LED continues creating an ideal environment for vigorous vegetative growth. ⸻ 🥥 Feeding Adjustments Over the last couple of weeks, all four plants developed a slightly lighter shade of green. Since every plant displayed the same colour while remaining healthy and growing vigorously, it became clear that they weren't struggling—they were simply asking for a little more food as their metabolism accelerated. Rather than waiting for deficiencies to develop, I responded by increasing the base nutrients slightly. Current feeding now consists of: • Plagron Hydro A — 1.8 ml/L • Plagron Hydro B — 1.8 ml/L • Plagron Hydro Roots — 1 ml/L By the end of the week, the results were already becoming visible. The newest growth across the room is gradually deepening in colour while maintaining the vigorous pace of development that has characterised this project from the beginning. It's always satisfying when small adjustments produce exactly the response you were hoping for. ⸻ 🌿 Pickle Lemon Haze F1 – Plant B Plant B continues proving why every phenotype deserves its own diary. Although she shares the same genetics as her sister, she's expressing herself in her own unique way. Her recovery after topping has been incredibly smooth, and the two new dominant tops have quickly established themselves. Around them, the secondary branches are climbing confidently, creating a naturally balanced and increasingly bushy structure. One of the things I enjoy most about this phenotype is how symmetrical she has become. Looking down from above, it's easy to see the canopy beginning to spread evenly in every direction, giving her the kind of architecture that should work beautifully once future training begins. Her stem continues thickening nicely, the internodal spacing remains compact, and the leaves stay upright throughout the day, showing no signs of stress following last week's topping. The lighter green colour that was present earlier is already beginning to improve following the feeding adjustment, while the constant production of fresh growth leaves no doubt that she's thriving. Healthy plants have a way of speaking without words. This one certainly looks happy. ⸻ 🔍 Looking Ahead With the topping now fully behind her, the next stage will simply be allowing this beautiful framework to continue developing. The goal is to let both new leaders strengthen naturally while encouraging the lower branches to catch up, creating the even canopy that will later make training and flowering far more efficient. For now, there is no need to rush. She's building exactly the kind of foundation I was hoping for, and sometimes letting the plant dictate the pace is the smartest decision a grower can make. Every day she becomes a little fuller, a little stronger, and a little more interesting. ⸻ 💙 Thank You A huge thank you goes to Zamnesia for the incredible Pickle Lemon Haze F1 genetics and for providing the complete ecosystem that makes Project Blue Tent possible. Another heartfelt thank you goes to Plagron for supplying the Premium Coco Growbags together with the Hydro nutrient line, helping these ladies develop strong roots and healthy growth week after week. I'd also like to thank GrowDiaries for giving growers around the world a place to share knowledge, document their journeys, and inspire one another every single day. And finally, thank you to everyone following this project. Whether you've been here since germination, recently joined the adventure, leave comments every week, or simply enjoy watching these plants evolve, your support truly means a lot. Project Blue Tent is about learning together, celebrating every stage of the grow, and showing that every phenotype has its own story worth telling. I hope you're all having an amazing week, and I can't wait to share the next chapter with you. Until next time... Growers Love, happy growing, and take care everyone! 💚🌱

Buds fattened up quite a bit

The "Gelato" grows in a very particular way, an irregular bush with the right brunches in the right place, we have also patched the sides and placed something dirty in the regrown central.

: - Day 1 week 5: just checking how lst is doing, they will be ok - Day 2 week 5: not completely dry to water so I’ll wait for day 3 of week. Did lst to make sure all branches receive as much ligth as possible - Day 3 week 5: watered them with 4ml/L calmag and 2ml/L bio grow ph 6,5 tap water trough activated carbon filter. RHC#2 broke one of the branches, I had to tape it. Not to be worried, she’ll recover from that. RHC#3 is very slow compared to the others. - Day 4 week 5: defoliation so sun enters better and wait. - Day 5 week 5: added 1L of water with 2ml/L Bio grow, 6 ml/L calmag and 2ml/L bio heaven. 1600 us/cm and ph 6,2 - 6,5. RHC#3 suffered of broken branch due lst 😞 still learning about the flexibility of branches. I think she’ll recover hoping not too much stress for her. - Day 6 week 5: RHC#3 looks good despite broken branch. Not much for today just watch temp and humidity, hoping they grow tall so I can cover a good part of the tent. - Day 7 week 5: water with the usual calmag and biogrow ph 6,3. Defoliated every 3 days or so to keep light enter every branch

Test FBA 2503 – 42Fast Buds 68 days from seed — and we’ve reached the final stage: harvest time! Although the plant didn’t grow very big, it truly impressed us — the buds are dense, large (as big as a fist!), and absolutely drenched in sticky resin. The pinkish hue of the buds gives this beauty an extra touch of elegance — she looks stunning! But the most striking thing is the smell. It’s incredibly strong, sharp, and long-lasting. Our girl has a seriously intense chemical scent — it fills the entire grow tent instantly and lingers for hours. Not for the faint of heart! From the beginning, we focused on giving her everything she needed: a well-balanced substrate, a stable environment, and, of course, proper nutrition. Huge thanks to Xpert Nutrients for their powerful line of fertilizers — they played a key role in helping this plant reach its full potential, delivering impressive trichome production, vibrant colors, and strong structure. And special thanks to 42Fast Buds for the opportunity to test this unique and powerful autoflower — it’s been an amazing experience! Harvest results coming soon — stay tuned!

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil spread evenly across the top of the soil. Day 1 we had a high temperature of 84°F. We had intermittent storms and showers throughout the day that took care of the watering. The powdery mildew treatment worked well on these. Day 2 we had a high temperature of 88°F. We had on and off rain and thunderstorms throughout the day. The rain took care of the watering. These responded well to treatment. I'll treat again tomorrow. Day 3 we had a high temperature of 94°F with clear sunny skies. I watered about 5 gallons from the well. I treated these again with Growers Ally fungicide. The warmer nights, blazing sun, and this fungicide have really cleared up that powdery mildew. They've also decided to go all in on flowering. Day 4 we had a high temperature of 94° with sunny skies. Heat index was over a hundred. It was super hot today. I watered twice about 8 gallons total. Everything looked good after treatment. Day 5 we had a high temperature of 95 and partly cloudy skies. I watered twice about 4-5 gallons each time with well water. Day 6 we had a high temperature of 91°F with partly cloudy skies. I watered twice today 4-5 gallons each pot, each time. These look great after treatment. Day 7 we had a high temperature of 88°F with sunny skies. I watered 5-6 gallons each pot. This week was a success. The powdery mildew issue has been cleared up. The Growers Ally fungicide worked great. These girls have rooted into the ground through the pots which is helping some of the 100+heat index days. It's hard to keep these pots moist in that kind of heat. Overall it was a great week.

Super pumped to try it out, reminds me of when I was a teenager. 🌱😎💨