Likes
Comments
Share
@Chi_K24
Follow
Hey folks. The first set of uploads for this week was taken on Wednesday. Super heavy defoilation done. Lots of excess growth under the main conopy so I lollipoped them. In total between the 4 plants I estimate about a 1lb worth of leaves! She's a bushy plant so I got to keep her in check. Regular watering of 40mL of molassas to 19L of dechlorinated h2o. Also did a bit of lst with wires, binder slips n the 3d printed clips you see in the photos. Work great and its opening up the canopy wide. I can already count more than 15+ potential main cola sites. Not sure how much for i can make befor flowing which starts mid August for us. I may have to starting thinking about when to apply our second round of top dress. I may start to feed her with higher ratios of the bloom amendments. Also a note. Watering with molasses is a new thing for me and it seems to work wonders with a organic grow since you are feeding the microbiology which in turns feeds the plant roots with co2 and organic ions. Pretty cool to see the plant respond well to the carbs added via watering. Another note to mention is I'm starting to notice some gnats hanging around the topsoil. I do belive the molasses sugars are attracting the critter which is bad! I have been combating them by spraying thr topsoil with neem oil. 1tbs per quart of warm water and 10 drops of non-posphate dish soap to act as a wetting agent. (Helps the neem oil dissolve into the water). I have been applying the solution to the top soil every 3-4 days and have notice a significant decrease in gnats flying around and the plant doesn't seem to mind it at all. I'm just hoping it helps kill the gnat worms if they did lay any eggs into the soil. Hope you guys enjoy this one.
Likes
50
Share
Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Likes
9
Share
hola colegas , 6 semanas desde el cambio a 12/12 , las nena siguen bien amarillando algunas hojas por falta de nitrigeno me imagino , instale los tutores que me faltaban a las 5 nenas que no lo tenian , EXHALE CO2 es una bomba 100% recomendado. tienen un olor muy rico que al empezar a subir la escalera del segundo piso se siente el buquetazo , segun yo voy bien , cada vez queda menos para la cosecha y eso me deja muy feliz , ya quiero que llegue ese dia , el ultimo riego con fertilizantes que hice no use la base (top bloom ) y la verdad respondieron bastante bien las plantitas , saludos a tod@s de esta gran comunidad y pagina , grow diaries ,me encanta. pueden ver el avanze de mis nenas por instagram tambien , abrazos y que esto no pare .
Likes
4
Share
Die Umstellung auf 12/12 ist passiert, jetzt beginnt der Stretch und dann die Blßte. Die nächsten zwei Wochen wird nichts geschnitten, nur die hÜchsten Tops werden auf eine hÜhe gebracht. Ich bin sehr zufrieden mit dem aktuellen Stand! :)
Likes
26
Share
Well, these girls are well on their way into bloom. They are really stacking it on since the addition of the worm castings. I strongly suggest everyone use worm castings in your soil mixes, even if you are using salt-based nutrients.
Likes
59
Share
@Jsammy09
Follow
8/19 (Day 63) - Pretty normal/typical today. Have just been monitoring since the defoliation a few days ago. Environment has been stable, stay around 78/79 degrees during the day and around 73 at night. Humidity fluctuates between 55-60 RH. PH stays 5.8/5.9. I did accidentally feed a bit much and have been watering with just RO water and they have been drinking fine, a few deficiencies and I also lowered my light power by 10%. I may end up changing the res and water tomorrow just because I did mix my nutrients a little hot by accident and took me a few days to notice. Everything is looking pretty good thus far and we are getting closer to finishing! Pretty pleased with my first grow but excited for the second because I have more knowledge and have a few things that im going to correct and do differently. Will be updating throughout the week. Thanks for looking. 8/20 (Day 64) - Decided to just ride out and keep topping the res with RO water, Calmag, and Rootdrip. I think I added too much Calmag last week trying to correct the calcium deficiency I was seeing. Girls are drinking just fine and not showing any real issues. Everything is stays in check. Tomorrow is water and nute change. 8/21 (Day 65)- Woke up early and got the everything pumped out and fresh water and nutrients back in. Definitely over did it on the calmag last week by mistake but doesn't look like any real harm done. Roots and plants are looking good and getting big! All the plants seem at slightly different stages in flower though, not sure if its something ive done or just differences in plants genetically. All conditions are in check and gonna continue to watch them hopefully keep fattening up! As always, tips and recommendations always appreciated!
Likes
20
Share
Well,all i hve to Say is she Still growing well.😏😊😊 Well but there are some lil brown marks on a few leaves so i must hve overfeed her a bit,i'll do my research. ✌️✌️✌️
Likes
9
Share
@Sauce_XL
Follow
1.20.2024: Time to gives this a go. 2.3x2.3 tent, XS1500 light, 2 gal fabric pots. Pots filled with FFOF(90%) & Perlite(10%.) Don't ask me why I chose 90/10. Nutrents are the FF Trio. Also growing a freebee seed from Humboldt Seed Co(Emerald Fire OG Auto.) Decided to germinate directly into the medium. Light is at 50% power at 2.5ft from the top of the pot(s). I'll have the light running 24hrs until it sprouts(fingers crossed it does.) I sprayed the top soil with pH 6.5 water when i stuck the seeds in then placed clear plastic cups over the seed location. My 4inch fan is on the way and it comes with a monitor for temp and humidity....no idea what current stats are. Just hope the damn thing spouts. Fingers crossed. More to come. 1.23.2024: 3 days and still no sprout. Going to give it another day or two before i go fishing for them. Off to a fantastic start! 1.24.2024: They've finally popped....aaaaannnddd we're off! 1.25.2024: Took the lil domes off, opened 2/3 vents for some circulation. Been misting the top soil just to keep it moist with 6.5ph water. I also "bottom fed" 12oz of water just to keep things lubricated. On the fence about when to give the plants a proper watering. Might keep things going "as is" for the next two days. Inline fan and associated hygrometer comes tomorrow(1.26) so i'll finally have an idea on what the current stats are in the tent. Will make adjustments at that point in time. Light is 2.5 ft from soil at 50%. 1.26.2024: Inline fan came yesterday. Only set up the probe just to understand temp and humidity. With the light at 50%, 2 ft from the soil, all vents closed except one(1) port at the top, my current temp hovers around 79 and the RH is 50%. After setting up a humidifier, i'm now running 75 degrees, 64% RH and VPD .58. All within tolerance. I can already tell it will be a delicate dance managing heat, exhaust fan speed and humidity. Still haven't given the plant more than 2 cups of water and i'm only watering when the soil is dry. Tomorrow(1.27) marks 1 week since the seed was dropped. Plan is to lightly water the entire pot when dry for the next week or until growth really kicks in.
Likes
7
Share
@cliv4ge
Follow
Last week of the apple fritter.. As Im writing this I already harvested it. Ill report back in 2 weeks after the drying and before the curing. This was an amazing journey that its not yet finished. Drying and curing is very important and ill be doing the following: Drying Environment: - Temperature: Maintain between 18-22°C (65-72°F). This prevents terpenes from degrading while slowing the drying process. - Humidity: Aim for 50-60% relative humidity to avoid mold and overly crispy buds. - Airflow: Use a small fan to keep air circulating, but don’t let it blow directly on the buds to avoid uneven drying. - Darkness: Keep the tent as dark as possible. Light can degrade cannabinoids like THC. - Timeframe: Drying typically takes 7-14 days. Stems should snap (not bend) when drying is complete. Curing: - Jar Storage: Once the buds are dry, ill trim them again properly - Humidity Packs: Using Boveda packs (58-62%) to maintain proper curing humidity inside jars. - Burping: For the first 2 weeks, open jars for 10-15 minutes daily to release excess moisture and allow fresh air in. Afterward, reduce burping to once a week for long-term storage. - Curing Time: At least 2 weeks minimum.. Ill comeback soon with final dry weight. Wet was 400g. Keep up the good work galera 💜
Likes
2
Share
Still feeding full strength. When the calyxes swell I will stop feeding for a few day to a week to allow for senescence to take place.
Likes
19
Share
Pues han salido las 4 , 100% de efectividad. Hoy voy a cambiar ya a tiestos de 2 gal. A ver quĂŠ tal empiezan esta nueva semana despuĂŠs del transplante. Buenos humos a tod@s
Likes
164
Share
At the start of week 8 she is still doing amazing and looking very healty and lush green the little nuggets are fatning up nicely and smelling very tasty cant put my finger on it what the smell is but its like a certain brand of bubblegum very sweet Day 51 drinking 33cl a day that’s a lot for such a little thing but she takes it in 3 times feeding her at 6 in the morning 5 in the afternoon and 11 at night like a little baby that needs her bottle in time Some of the outer leaves are colouring a little but hey she is half way her flowercycle so i expected her to start showing Some kind of signs that fall is starting to kick in Day 53 split her stem on top of her flux knob to increasse thc and budproduction to the fullest potential and binded a soft bendie arround it so she does not split further then neccesary🙏🙏 To all contestants the end dates is moved to 31 december due to Some unexpected and unnormal wheather factors with Some of the contestants Some of them have to unfortunatly start over so to give every one a fair chance final date is 31 DECEMBER!!! Or 14weeks as maximum growcycle Everybody gets that?!🙄🤣🤣 Not many people know about this trick, but I’m sharing it with you today. Have you ever heard of splitting the stem of your plant? No? Well, did you know this will force your plants to create heavier and denser buds? And it also increases THC production up to 20%! The purpose of stem splitting is to disturb the flow of nutrients and water right at the base of the stem. This will cause the plant to start producing more trichomes which means heavier and denser buds with higher THC levels. Make sure to read my article How to split the stem to increase THC levels after I tell you how to do this in 3 easy steps. How to split the stem in 3 easy steps: Step 1 Tie the stem with a rope or cable tie right at the base. Tie a second rope or cable tie a couple inches above that. Step 2 Take a very sharp knife and cut from the top tie to the bottom tie. There should be one vertical cut that is a few inches in length. Step 3 The knife should remain inside until you have a pencil or chopsticks to replace it with. This is to keep both sides of the marijuana plant from touching each other. Splitting the stem causes stress on the plant and forces it to create more trichomes. Trichomes serve as protectors of the marijuana plants. Specifically against pests, diseases, low temperatures and wind. Because of this protective feature, more trichomes are produced during times of stress. Take advantage of this special feature and read this article about splitting the stem and many more secret tricks to grow huge buds and increase your yield
Likes
9
Share
@Cannabot
Follow
Love this plant,beutiful uniform growing.The smell is amazing,super sweet smelling.Found her sweet spot nutes wise.Very happy thus far
Processing
Likes
3
Share
Every week I watch my girls grow into beautiful budding trees only difference is now she in flowering I take her outside to absorb some of the beautiful sunshine and she's loving every bit of it. I let her stay outside for 8 hours in nature then back inside for another 8 hours of led full spectrum and turn out my lights for another 8 hr she's an Auto so she loving every minute of this ...... this is the results ⬆️
Likes
9
Share
Guava Runtz Automatic – Woche 5 Meine Guava Runtz Automatic befindet sich aktuell in Woche 5 und zeigt einen richtig schönen, buschigen Wuchs, der mir persönlich extrem gut gefällt. Sie entwickelt sich sehr kompakt und gleichmäßig, wirkt dabei absolut gesund und vital. Ihr Gesamtbild ist kräftig und stabil, genau so, wie man es sich in dieser Phase wünscht. Bis jetzt sind noch keine Anzeichen der Blüte zu erkennen, aber ich gehe stark davon aus, dass sie in der kommenden Woche damit beginnen wird. Die Voraussetzungen dafür sind auf jeden Fall perfekt. Ich bin mir sicher, dass sie ordentlich abliefern wird – sie macht jetzt schon einen sehr vielversprechenden Eindruck. Neue Updates gibt es jeden Sonntag – bleibt dran! --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Guava Runtz Automatic – Week 5 My Guava Runtz Automatic is currently in week 5 and shows a really nice, bushy growth structure that I personally like a lot. She is developing in a very compact and even way, while looking completely healthy and vigorous. Her overall appearance is strong and stable — exactly what you want to see at this stage. So far, there are no visible signs of flowering yet, but I strongly expect her to start transitioning within the next week. The conditions and her development definitely point in that direction. I’m confident that she will deliver great results — she already looks very promising. New updates every Sunday – stay tuned!
Likes
3
Share
@Budnoob
Follow
Missed a few weeks due to laziness. Been quiet a bit of slow growth, and yet to see any colour in the the leafs yet. But still plodding along. Anyone grew this strain before??
Likes
13
Share
Day 23-30/04/22 all looking very healthy gave them a nice watering today about half a liter each! Bio grow and calmag!!! - Day 24-01/05/22 everyone of my babies are looking very well 👌. - Day 25-02/05/22 everything looking good no need to water today just let them do there thing!!!! - Day 27-04/05/22 gave them a nice watering today!!!! All looking good 👍
Likes
22
Share
Allright... starting today (20-12-2021) as day 1. 9 ladies in a whole new setup (see germination week). All looking great, curious about the performance of this setup and the lights in particular. Let's have some fun. 21-12-2021: First 12 hours of light was on the ladies @600Watt. Measured some PAR values to calculate current DLI. Average DLI: 61.7 mol/m2d, Peak DLI: 84.9 mol/m2d, PAR: Average: 1404, Peak: 1989 So it could be a little less😆 Will raise CO2 level next week when first nodes are there. I guess I start with 1000 ppm and raise it with 100 every week. 23-12-2021: Great... all still alive.. Put power down on the lights a bit because a DLI of 50 is a bit on the high side for seedlings I believe. Noticed a huge drop of PH so added some fresh water and will reevaluate tonight. My guess is that the buckets are finally full with water and so the older water is flushing through now. If I am right I should not see a PH drop tonight. If I am not right I will raise the irrigation frequency. 26-12-2021: The PH problem is solved... my PH- bottle seal was leaking😡. 7 days old now.... I believe they look fine. Raised the power of the lights again to see how temperature will hold. Total power now is 950W (just for a few hours to monitor the temperature).
Likes
17
Share
@Dunk_Junk
Follow
Wow she tripled her height this week! From 20cm to 60cm!! She has very long internodal spacing. I note a VERY short veg period in this strain.