Básicamente lo mismo, aunque está semana pilló bastante más horas de luz(tuve que irme fuera de casa dos findes seguidos, en los cuales la dejé con la luz encendida full 24/7 en la caja) Como experiencia utilicé café reposado 48h para "alimentarla" e intentar bajar el Ph de la tierra (coco ph6+hummus ph7+vermiculita ph8= ph total 7) El otro experimento fue cubrir la tierra con coco para que el tallo eche raíces y aprovechar su espigamento! Las horas de luz solía dejarla 8h en bombilla mientras duermo, y el día la pongo en la ventana a que tome el fresco, pero apenas tiene luz directa, me da la sensación que crece más rapido cuando vuelvo del finde, estoy replanteandome tenerla más tiempo en la caja con luz, porque la veo aún pequeña, y quizá ponerle un ventilador de pc o algo🤔..veremos, aún tengo el papel de aluminio al lado de la caja y ni se lo he puesto, con eso os lo digo todo☝️🎃

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

day 73 I was not ready for all this! 🤣🤣 they literally exploded and I started seeing purple on these buds I had to tie them up so the weight of the flowers didn't break the branches. compared to El Patron that I also have in my tent, Purple is much fatter and shorter. they have a very sweet scent and I can't wait to taste it, but alas I will go there a little longer. I have to say that 6 photoperiods are too many for my 1m x 1m x 2m tent. in addition to this I have noticed that they are very hungry. like me and give me some advice. thanks for stopping by, have a nice day and happy cultivation

Que pasa familia, vamos con la segunda semana de floración de estas Gorilla cookies Auto de FastBuds. Tiene muy buenas reseñas y pues me animé a colocar 4 plantas. Alimentamos nuestras plantas con Agrobeta. Por supuesto el ph se mide en cada riego y se mantiene en 6.2 y riego en intervalos de 48h. La temperatura está entorno al 22/24 grados y la humedad anda sobre el 50%. Las plantas en si ya están bien sanas, tutore la rama principal para que no se fuese de madre, y así controlaré la altura. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Week 3 of flower. Plants look great. Trying a few more tops this run, with some upper deleafing. Ive also been running Hydro Bio and ive decided to move the lights down to anout 2ft. Im running 800W of KingBrite LEDs and im hoping for a nice outcome after the upset with the test of bleach for sterilization vs H202. This run the Hydro Bio has microorganisms, so no sterilization needed. PH seems to be more stable and root zones of the vegging plants seem much more white and more of them. Stay tuned!

❤️🍀my first sativa👀

Short video on her progress. Preflowers started so time to add worm castings and banana FPJ

DIARY Plant was given nutrient solution every day when the sun went down in the concentration down bellow -    FloraSeries Gro-->1.8 mL/L -    FloraSeries Micro-->1.2 mL/L -    Flore Series Bloom-->0.6 mL/L When I mixed all the nutrients in the water the ppm was 840. That is quite high so I diluted the solution with tap water to 590 ppm Day 50 It was time to bend two new mains, they were long enough to be trained. Firstly I drilled two holes (parallel with mains) into the side of plastic pot. Then I bended one main at the right angle and secured it with electrical wire to a drilled hole. The same was done with the second main, but I was more careful while doing it because the main stem was already under tension and I was afraid it would split. Bend down mains that now resembled letter T were also topped, so I was left with four new terminal shoots. Day 52 Plant recovered very quickly. Two mains turned upward just after two days. Day 55 Four new shoots are growing were quickly and are already about 3.5 cm long. OVERALL PLANT CONDITION Plant recovered very quickly after topping and bending, it also didn't show any sign of stress. Before bending it was 16 cm tall after bending it measured 12 cm. Overall plant is healthy and it doesn't look like it suffers from any deficiencies. Day is about 15 hours long and plant is receiving about 8 hours of direct sun light. REPORT ON CLONES Clones are doing OK and look healthy. I watered them every other day with tap water WEATHER REPORT Day 50-51 Weather was sunny. Average daily temperature was 30 °C. Day 52-56 Weather followed similar pattern every day. It was sunny at morning and afternoon, and it was raining in the evening. Temperatures were around 26 °C during day and 19 °C during night. I also captured some clouds (mammatus clouds) with interesting shapes at day 52, they look liked child drew them.

She is fed every 5 days. 8/5 I'm bubbling up a batch of pit bull Stew tea. This is my first time making a tea. Worm castings, bat shit, recharge, kelp, foxfarm grow big and rice water for carbs and starch. Been hearing good things about rice and potatoe water. 8/6 two gallons of tea. 8/11 giving the same tea minus the recharge adding 1/2 teaspoon foxfarm open sesame. Today she is getting a Foxfarm feeding. 8/7. She takes almost 2 gallons until I see run off. She was fed 24 ml per 2 gallons of Tiger Grow. I could have went to 30mls, but like to stay on the safe side. She is about the size I wanted her to be. I prefer no one can see her. Also how much bud do I need. She has been fun to grow. Next year I'm growing 2 outdoor photos different strains. This is my first grow in many years. I beat the crap out of this plant. Tying, pulling and bending. She has branches that look like a W. She should be in flower very soon. I been pulling off the obvious branches that will not make it. Then once she is in obvious flower, I will see if anymore need to be removed. I'm sure there will be a few, have to see what the stretch does. She got well fed this weekend. So I expect a lot more growth.

They’re loving the heat, even if I am not. They’ve grown substantially within a week. I have been rotating the stem around the stem clockwise to train its strength. Anything else you guys suggest I should consider? Please shoot your advice my way.

Hey growers, It's been another good week of growing. The girls are starting to get some bigger bud production. The WW seems close to harvest 2-3 weeks away, and the PP is still maybe 3-4 weeks away. The trichomes are looking great on both but I couldn't get a good pic thru the jewlers loupe unfortunately. I'm going to start flushing the WW this week and keep the nutes going on the PP. Other than that, nothing else to report. Happy Growing 🌳

Week 24 October 10 - Daylight 11h : 8h20 / 19h20 Temperatures 14° C to 23/24°C - globally rainy weather during the end of September and beginning October. Rare sunny moment but cool temperatures: best conditions to develop mold or diseases. Even if the plants are in a protected from rain and ventilated area. It’s why I harvested 2 plants ( Break Pad Breath + Flash Back #2 ) before losing the yield destruct by botrytis. Royal Moby and GMO x Zombie Kush are still flowering. RM: interesting sativa flowering, productive and resilient. Lot of resinous flowers; maybe it will be some seeds inside appearing after an autopollination. No mold for the moment. Impressive refreshing Lemon smell. Ready in 10 days max. GMO x ZK: ending the flowering cycle in a good way: pretty dense flowers, covered by resin. Spicy and flowery aroma. I had to cut a little bud attack by botrytis. Ready soon. Last weeks just add pk13/14 + Bud XL and overdrive + enzymes Start flushing now.

Bernice (my largest at 6" tall) got topped today after the 4th node. All 3 others will wait a few more days till they reach the same height and node spacing/growth. Will start foliar feeding of (1 gal water/2ml - liquid seaweed/2ml - gold shield silica/2ml boomerang) tonight on 03/06/21. Plants seem to be drinking water a bit more this week, meaning their root systems are growing and getting stronger. Will likely feed plain RO water tomorrow and check runoff PPM & PH. All in all they're growing much better, at the start of this week they were showing signs of deficiencies, due to me not giving them a good feeding early enough (I was afraid of over-feeding and instead under-fed!). Due to under-feeding some of my fan leaves on the early growth have gotten some brown spots, which I'm unconcerned with as these will eventually either fall off or be trimmed off by myself before sending to flower.

8/9 shes flowering💚 pistils everywhere. Been feeding with open sesame from fox farms and everythings looking awesome. I am concerned about how lanky she is. Her node spacing is tight but shes long and the branches are already drooping from the weight from pistils and new leaves lol fml im gonna have to get stakes/supports soon 8/10 shes loving the weather or the nutes, shes praying so fucking hard its beautiful

i used a low dose because for my plants even half strength is often too much, this saves nutrients tho. Around 825ppm, 18 DLI, Ph 6-6,25 thanks to FastBuds and Terra Power!

I finally broke a pound with a single autoflower! Couldn’t have done it without AGLEX cob led’s, Remo Nutrients, and coco coir. They’ve changed my game completely! This grow started off as a pretty standard grow. I did absolutely no training until the veg period was winding down, and pre-flower was beginning. As the SCROG net went in, a little later than planned, numb fingers due to cervical spinal issues, and a poorly time muscle spasm, I snapped the main stalk...disaster right? Apparently not! They’re tough plants! Within a day or so she was perked up and sending up new colas from all the growth nodes now exposed to the 2000w AGLEX cob led’s. These lights have transformed my grow process, and increased my yields by over 300% compared to my old led’s, and only draws 408w from the wall. 1.23g/w is quite satisfactory I didn’t have much tucking to do this grow after the original SCROG. Due to the fact I was a little late getting the SCROG net in place, she didn’t have too much stretch left in her, she certainly fattened up quite nicely though, almost too much so in places. The front left side of the SCROG net got awfully crowded with huge buds packed tightly together. Lesson learned...keep the branches spaced apart slightly further, and maybe allow slightly more vertical growth of the colas to allow slightly better light, and air flow penetration. My issue is I only have 6 foot ceilings in my tents. The ceiling in my grow room is only a little over 6’2”. I managed, through SCROG techniques, without topping or fimming, to keep the top of my canopy 24” from the floor. This allows plenty of space above for the AGLEX cob, and exhaust fan. After last feeding I flushed with just Ph’ed water for 5 days, then gave the plant 48 hours of darkness, to rid itself of chlorophyll before harvesting on November 4th and hanging in a drying rack. It’s still curing in jars but after trying a few samples, it’s an awesome strain, and hits hard. It’s not as hard as it sounds to fill a 4x4 tent with a single autoflower, and still pull 18 ounces (504g) out of that tent. With simple SCROG technique, defoliation, quality grow medium you can achieve the same results. Of course you’ll need an AGLEX 2000w cob, but for an 18 ounce return on a $300CAD light, in 3 months, it’s a no brainer folks! You won’t find a better light under $300 Canadian. You’ll also need a quality nutrient line, and it’s hard to go wrong with the Remo Supercharged Kit. The proof of those 2 products quality are in my harvest. I hope this has helped improve your own grows somehow :) Head over to YouTube and visit my channel, just search for Scrog Freak, or click the link below. Drop a like and subscribe, more videos and logs to come! Recently entered a Gelato OG Grow Off and will be posting updates and instructional videos there. Check it out! Thanks and good growing! ScrogFreak https://www.youtube.com/channel/UCDFY6EjqIMqv2peq1d1eM1Q

The ethos put on a lot of stretch this week. The viparspectra xs2000 is doing a great job. Running cool and keeping the plants happy. Everyone is popping pistils. Excited to see what kind of variety comes out of this gutter!

Se instaló malla scrog, first time. Se riega foliar con delta 9. Entrando a floracion. Se accidentó una glueberry que mantenia un alambre en su tallo, el sustrato se seco demasiado y el tallo cedió. Quedaron buenos brazos restante por lo tanto será interesante ver el desarrolla de esa planta versus sus hermanas. Primera semana de LSD-25

Beginn Woche 3. Wasserwechsel und neue Nährlösung für den AutoPot angesetzt. Deutlicher Unterschied der beiden zu sehen (deutlich mehr Strech im AutoPot). Aber auch die 2. Im Airpot steht gut da. AutoPot 30l Tank (Gedüngt wird nach dem Plan von Terra Aquatica für Coco). Airpot wurde mit Greenhouse Feeding biolinie gedüngt je 4g/l Ende Woche 3 und was soll ich sagen... Bisher schaun beide gut aus, aber der Unterschied zwischen Airpot/AutoPot is schon Enorm (Vergleich hinkt etwas da ja auch Unterschiedlich gedüngt). Der EC ist recht hoch, hoffentlich geht's gut. Leitungswasser kommt mit 0,8 aus dem Hahn.....