The Grow Awards 2026 🏆
Likes
Comments
Share
Going good this week. Really packing on the buds now. Added some more nutrients that I now have kicking around for a hydro grow. Plant 6 was transplanted last week as I thought it may have been having some issues. I pulled off all the yellow leafs and it seems to be alright. Just glad it’s still kicking. Question: Should I be pulling leaves off my other plants? There’s a few covering up lower bud sites but I’m unsure how it’ll effect my auto flowers. Question: Wondering when to harvest these bad boys. Trichomes don’t appear amber yet. Website for the seeds say 70-90 days seed to harvest. I’m wondering if I can push it to 90 days (13 weeks(ish)) even if they appear ready at 70. Will that effect my harvest?
Likes
19
Share
Watered straight water on day 130, runoff & pH still high at 5/3230, raised lights to 23" above the canvas do give better coverage but only getting between 17,000-35,000 lux so I'm under lit for flower, might be upgrading to HLG Scorpion R Spec LED. Added half a tsp NPK Microbes Bloom Stage today, hopefully this will help.
Likes
24
Share
@BunnyBud
Follow
Phenological stage: the plant has entered pre-flowering. Structure / LST: adjusted the Low-Stress Training to keep the canopy open and light spread even. Leaf appearance: leaves are drooping slightly downward with a very light green tone, likely due to slight overwatering and previous pH issues. Feeding: 800 ml nutrient solution 0.4 ml/L Biobizz Grow 0.2 ml/L Biobizz Bloom (to support early pre-flower development) EC/PPM reading: ~430 Runoff observation: no runoff was produced with 800 ml, so next watering I plan to give at least 950 ml, possibly up to 1 liter, to ensure at least ~10% runoff. Environment: Temperature: min 24 °C – max 30 °C (average ~28 °C) Humidity: 60–65 % (planning to gradually reduce to 55–50 % over the coming weeks) Ventilation: installed an automatic oscillating fan to improve air circulation. Notes: despite mild chlorosis and the downward leaf posture, the plant appears stable. Main focus for the next weeks: correct pH, careful watering, and progressive humidity adjustment.
Likes
2
Share
@MG2009
Follow
07/09/2019 Start of week 6 flower topped off the reservoir two days ago with 4 liters of nutes so will do reservoir change in a couple of days thanks to Advanced Nutrients technology i don't have to rush to get it done. The buds are getting heavy and super dense,stems are leaning from the weight. (Get a fan for future grow). Did light defoiliating as needed,and leaves are sticky as hell I could make finger hash if I had more plants I've used gloves and freeze them after trimming and peeled off the resin. Very flavorful!
Likes
124
Share
Day 1 drying: Really nice strain! Easy to grow, medium dosage of nutrients. Smells amazing, I’m really curious how they will end up after the drying. Let’s see in some days. Drying day 7: finished and damn the terps are amazing! Smells and taste amazing. It reminds me of amnesia but in a mix with mimosa. Super special. I do really recommend trying this one out. But I would recommend using living soil over coco!
Likes
37
Share
What a difference a week makes, now starting week 4 and moved them up into their final pots now that I have some space in the tent and they are currently under 600w dual spec and a 315w daylight, I have topped 5 of the 6 but left one as it looks like it’s a stocky plant anyway, they all look like they should be impressive plants so far and visibly growing by the day 😊
Likes
41
Share
@bruxup
Follow
Week 26: September 20 2020 - September 26 2020 Great week, no issues, no complaints. Buds are getting fatter and the smell is really starting to come off of them. Fertilized for the last time on Friday and will begin flushing with water until harvest. Blue Dream looks like she can come down now but trichomes are still milky with very little amber. Keeping a close eye on her but I think 2-3 weeks more at most before she's chopped. Girl Scout Cookies is an absolute beast! She got some wild colors from the cold snap last week and she looks awesome. I got some dead leaves I could pull, but they all look awesome with the reds, purples and greens. Buds are dense too! The pictures and videos don't do them justice. The fan leaves have long stems so they're hiding the buds, but if you pull them back, each cola is huge and gets bigger almost daily. Trichomes are starting to come in more heavily, and pistils are just starting to turn red. Purple Kush is starting to put on weight and has really shaped up in the last couple weeks. Surprised she's still so green compared to the purple in Girl Scouts, but it could just be the phenotype. She's definitely the furthest back of the two and may stay out a little longer. Overall, I'm extremely impressed and happy with my results this year. Decent weather in the forecast for the month of October. Looks like we're on the road to a pretty sweet harvest. Hope everyone is staying safe. Thanks for stopping by. Cheers!
Likes
7
Share
January 31st - Day 120 from seed. I flushed twice with flawless finish over the past 8 days, and harvest day finally arrived for this freak show CBD Cheese Pheno. When I started this grow I had no idea a phenotype from an auto-flower strain could take 120 days from start to finish. That said I'm not complaining about the extra time because she turned out beautifully. Massive, dense, sticky, and aromatic flowers. Thanks for following along. I will update final details once dried. Stay tuned!
Likes
4
Share
Yeah this strain finished in 9 weeks just like the guidelines say, tons of golf ball sized nugs. I could have got a better yield if I topped her earlier but I'm really happy with this grow. $20 investment and a quarter pound of weed in return. Outdoor plants really require very little to no maintenance, so if constantly pruning and training isn't something your interested in then go outdoors mate. In terms of how I grew this girl I just used a bit of cal-mag and amended the soil with organic nutrients before flowering. The organic notes saved my ass for flower. The yield may not be as much as many outdoor plant but again my first outdoor grow. I'm happy with the quality over quantity too. Thanks for all for stopping by!
Likes
27
Share
All are going strong, zkittles OG auto is nearly 30cm bigger than the rest and has started showing bud sites, the rest are not far behind at all. I think they will be into flowering stage at the end of next week and by then hopefully 30-40cm taller. Do si dos is very different, looks short and stout so will be doing some LST on her. Seems to be happy with the nutrients and strengthening nicely. Added another 600w light on 11/12/20 so 3 600w lights in now.
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
13
Share
Likes
1
Share
Buenas a tod@s... Otra semanita más de flora para estás hermosas niñas... Creciendo un poquitito más, super bien, super fuertes... Ya faltan pocas semanas y la verdad q lo las veo nada mal, absorben muy bien los nutrientes, aumentado el riego a 1lt x planta, no tienen ningún signo malo de nada, todo perfecto, eh tenido que hacer un poco de defoliación ya q habia muchísimas hojas grandes, se nota la buena circulación de aire, la penetración de luz en las partes bajas ( que aunque algunos no les den importancia o digan que esas zonas le quitan fuerzas a la planta, a mí me gusta dejar que crezca todo tal cual, sin problema.) son cogollos pequeños, pero los aceptamos igual, claro q sí... Buenos humos y buena semana para tod@s a seguir trabajando... 🤗👍🏻🙏🏻 💀😎🇦🇷
Processing
Likes
10
Share
Start of week 5! Plants are doing great! Still some P & K deficiencies showing, but overall the bud development is phenomenal on the blueberries and is coming along nicely on the super lemon haze. I am still feeding an extra 2 liters to the Slh, this time at full dosage of part A & B, this seems to have helped with this past week (4). The blueberry are super sticky and smell amazing!
Likes
13
Share
Juhu in blüte. Klein, aber definitiv in blüte. Ich mag sie sehr.
Likes
19
Share
@valiotoro
Follow
Hello everyone week 1 of flower has passed for this Cherry Cola auto 🍒 Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻
Processing
Likes
13
Share
This plant has a solid stench of pure ripe lemons. So much aroma and color in every bud, purples, to dark green, to lime green, to solid frost. This one definitely a fun strain to watch grow and tend too for the last few months. She’s definitely a hungry girl, seemed to be the only strain out of the three that accepted and thrived with full feed nutrients. Would definitely recommend this Strain to someone For a nice uplifting day smoke, also seems to do me good for some pain and stress relief.
Likes
11
Share
@w00tGrow
Follow
Here comes the week 12. West Coast OG looks huge, what i can't say about Californian Snow, in some moment it buds stopped growing and im not sure about the harverst. what do you think should i give it extra week ?