Sunday 05-06-2022 Plants chugging along. Supplemented feed yesterday with Recharge. Trying powdered nutrients this week with a relatively high P fertiliser. Trichomes popping up on Plant #2. This grow is different from Test Grow #2, during early development of the grow there was substantial rainfall, the plants are significantly bigger and developing more slowly. Apart from the rain, I suspect that has to do with the fact my previous grow started and ended in short days (less than 12 hours light). This grow is experiencing increasing light, with daylight now 13+ hours.

Mar 24: Watering till runoff now... runoff ppm was 2500+... Will be using very mild nutes to flush over 1 - 3 feeds... or until I am near my input. Mar 26: Continuing to use 650ppm feed with bloom focus, 2L per plant gives 15% runoff... Runoff ppm is still very high... I wanted to check pH of runoff but the color is so vibrant i cant use the pH drops to view color, need to get a pH probe. Plants are thriving, no issues at all. the extra fan fixed the post-water droop. One plant is bushy and has the most bud sites, One is the smallest but has the most uniform structure, this one has the biggest buds and thickest stalk, One is about in the middle of the 2. Mar 29: one of these girls gets droopy early when its time for water, thought the canopy was too high so i tied down some more, no cigar... gonna try increasing calmag, if that doesent work im going to reposition in the grow box to a side instead of middle, may not need the upper end ppfd...

On day 2 of the week I turned both lights settings on (there are 3 options; growth: on flower: off / growth: off flower: on / growth: on flower: on) I set them both on because I read the more light the more bud and I was sure that the plant had started the transition and was flowering like stated in the previous week, the main stem got way to close to the light, (4in from ) and not having more room in the tent I bought a cheap garden net and distributed the plant so the light was as even as possible using a cheap little instrument with light sensor I bent the main stem pretty violently but it recovered well and is doing well tried dropping the temperature a bit by keeping my window open but I didn't drop it too much due too the fact that I live and sleep in the room just realized today that I should have changed the nutrient mix dosage at the begging of flower as recommended on the bottle to help the transition but I guess it turned out alright watering 2 -3 times a week 3L at a time

Sponsored by: 🦎THE HIGH CHAMELEON🦎-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 1/10 This sweetness was in a great location in the plant jungle. She has grown well compared to her sister but she also shows obvious signs of deficiencies, probably due to the pH but I'm investigating. I take some clones before sending it to bloom __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Check out The High Chamaleon website, their first selection criterion is the strong signature of terpenes by taking rare strains while being 100% organic and respecting nature. Safe anonymous shipping! ✅ https://bit.ly/TheHighChameleon __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

All in all this grow was super easy. I couldve done some things to make it better but she pretty much did all the work. This strain would be perfect for a SOG style grow because it produces mostly a singular main cola nug that's pretty huge and then the bottom nugs themselves are also decently chunky. 4/22 chopped the lower half the plant. Wet it weighs 50grams. Still have the main cola in a dark room for another day or so before im gonna chop. 4/26 bottom half of plant dried in 4 days. 5/2 top cola dried in 5 days. Total weight is less than 20 grams at 19.4 5/12. Ten days of cure and shes looking even better. Spongey thick nugs. Dark red almost brown Pistils with pyramid shaped nugs. I also wanted to not how fast and easy this grow actually was. She has so much amber I probably couldve chopped her 2 weeks previous. 3 weeks veg and 5 weeks flowering and some would chop. Review. Growing 9/10 for ease of growth Super fast and simple. You can Fuck up and get fat buds lol High: 9/10 super stoney. No paranoia Yield:8/10 plant a super short. Like less than a foot. Can probably yield around a zip roughly Bag appeal: 7/10after cure buds look good. Before harvest buds look fantastic as well

Week 10 for Wockesha she is finally at her end. All phenos look beautiful with different tones of purple through out the bud. All the Pheno had dense buds. Some phenos had better frost factor and some had better weight factor. Will do a whole plant hang dry for 2-3 weeks and then to a jar cure!

bubba has perked up well colour come back nice and shes the fattest of the bunch so far she's giving off a nice smell iv not had before very sweet and pungent she's only got 4 main colas and a few smaller buds but looking forward to her finishing up been waiting to try this one for a while I hit them with the 3rd dose of pk tee to finish her of just water to the end now can't get any good pics of these really so thanks for reading happy growing guys

The the buds were small so it made trimming a nightmare! But it’s done and the end product is worth all the time. I have loads of trim and small popcorn buds that will be dry Ice sifted and pressed into a hash brick. Will update the diary when I have some bcp hash Weighed up the trim at 588 grams, used my trim bins with dry ice to sift the trim and pressed it into blocks using a rosin pre press, I’ll now jar this and put it to one side. My first time doing this, definitely worth the effort!

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

8/9 The two half-feeds of Foop seemed to have turned the nutrition tide. The top dressing I applied (with mulch this time) should be kicking in over the next few weeks, but I'm leaning toward continuing to feed Foop once or twice per week to keep things moving along nicely. Flowering is now kicking into high gear... with the Pineapple Meatball being the farthest along and the French Macaron being the least. Ordered Lacewing larvae and wasp eggs (that are parasitic to caterpillars) on the way. Hoping to get them applied by the end of this week. 8/11 Insects deployed.

Defoliated this week, reveg growth is very noticeable. I cut off most of the single, double and triple bladed leaves. I moved my tent divider and shelf back in so I can grow seedlings/clones in a smal chamber if I want to. I added a small LED into the corner under the shelf where this plant is now to help the two plants that got stuck in the shadow. I will thin out stems eventually. My plan is to take clones off this plant and because of this I may leave most of the bushy growth on so I can take multiple cuts. If you watch the video- fair warning... my inline fan is noisy. It has started making a grinding noise and it is not pleasant to listen to 🤷‍♀️🏼

We are getting close! I’m chopping the deep purple one tomorrow! The colors these are displaying are truly beautiful! Different phenos but really close to one another! Everything rock hard and smelling righteous! FastBuds indeed always delivers!

Such a beautiful girl! Purple pink and red colours beautiful aromas smelling very like Californian fruits with gasssssy underbelly! Can’t wait to try her and enlighten you more!

Este segundo cultivo no he tenido todo el tiempo y energía suficiente para ellas. He tenido varios problemas con la alimentación, las he llevado cortas en la etapa crucial como el estirón después del cambio de ciclo. Solo espero me hay servido para aprender para futuros cultivos

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since time change to 12/12 h. Hi everyone . short update on the mini plant :-) it is starting to bloom nicely and i leave it as an experiment :-). There was also 1 g GHSC enhancer per liter. It was poured 2 times with 1 liter this week. Have fun and stay healthy 🙏🏻 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Niente da dire, 0 stress questa settimana non ho fatto niente, la prossima settimana aggiungeremo acqua se necessario. Si iniziano a vedere i fiorellini,

Growing nicely

Day 9 - These plants are growing immaculately. Dark green, thick, healthy leaves, no stretching, they're growing like an absolute dream. Since removing them from the run-off catching orange cups, they have happily air pruned themselves and are continuing to beast out. 💪 I've only watered them once on day 5 so far. I've been warned by other growers that M3 is very easy to accidentally over water, so I am keeping that on my mind with every check. Day 10 - Noticed some pale spots on one of my seedlings. It's only on the second true leaves of one plant. Gave them a watering with 6.5 pH water Day 11 - Spots on one of my plants still there, taking up a little more space on the leaves. Still only present on the second true leaves of this plant. The plant appears otherwise happy and healthy. All three others are green and mean. 💪 Day 12 - Transplanted these little lovies into 1 gallon pots. Gave a light watering to just the outer ring of the pot with 6.5 pH water. My Step-Veg program for my California Lightworks Solar System 550 has been gradually increased to R80 W80 B99. First time transplanting anything outside of a seedling before, I was embarrassingly nervous. Made sure to get a ton of pictures of each one because I'm Mom af. 😂 Anyway - excited to see how many ladies I can score this round! Please give me at least one! 💜🙏💙 Day 14 - Closing out a beautiful week. I'm still unsure of what is causing the spots on one of my plants. I've gotten many suggestions of pests, but I've spent at LEAST a cumulative 4 hours over the past 2 days with her under the microscope, combing the leaves like an overprotective mother, and I have seen zero suspicious microscopic gang activity. As a precaution, I mixed some neem oil and dish soap and sprayed all the plants at lights out. Storytime was a big hit with the kids. 🤣💜

just add more nutrients

SuperSativaSeedClub PurplePunchOGauto Week9 What up grow fam. Weekly update on these three. Two of the three seem to be growing good as the other has been fighting me since the beginning. I decided this week to transplant from 1gal pots to 3gal to see if maybe it'll fix my leaf burning issue. Over all super excited to see what the next couple weeks will bring. All in all Happy Growing