01/19 - Tied her down completely (HST) - full light coverage - running in 2x2 until clones in 3x3 are complete then transplanting into 3x3 - offsetting clean water and nute feeds. 01/24 - She got a little funky on me a couple days ago after the tent and light transfer, She is in recovery mode right now - She should be back to norm by Mon - Tuesday.

Strain is actually very easy to grow so i would recommend it even to begginers. Robust plant that did very well on topping, hst and lst training. Buds are thick and heavy. They release very pungent and piney smell with deep tones that reminds grape. After a week of drying i did some bud testing and i would describe the high as awesome physical stone with a bit of euphoria and happiness. Cant wait to cure the buds for a couple of weeks. Peace and be safe!

Week 11...the final week for a few plants

Woche wird noch beschrieben ... in der nächste Woche

Planta com bom crescimento, os botões estao engordando e tive um leve problema com a altura da placa que deu uma queimada emalgumas folhas do galho mais alto ja subi mais a placa.

Sloooooow going. My temps are fine if not ideal, humidity is steadily above 40%. Yet these plants still look weeks behind. If you are reading this and my parameters and see any glaring mistakes please feel free to drop a comment. I am definitely new to organic growing andI just don't know what to do. I started PHing organically this week. I ordered a water conditioner from Microbe life. It's not here yet, but soon. And if my video uploaded you'll see a product from Microbe Lift that will hopefully kill any fungus gnat larvae in the soil. Beyond that adding Armor Si back into my nutrient schedule is the only other thing I can think to snap these plants out of their funk. Good luck everybody else!

WEEK 13 - FLOWERING: Late Flowering Phase ​🌼 FLOWERING PROGRESS The Monster Maker has officially entered Week 9 of flower. The plant is in the middle of a perfect final "fade," with leaves turning deep purple and yellow as she exhausts her internal nutrient stores. Resin production is at its absolute peak—the buds are rock hard and completely over-wintered with milky trichomes. We are seeing the first few amber heads appearing, signaling that harvest is just around the corner. ​👃 TERPENES & AROMA The aroma remains incredibly potent. The dominant scent is a sweet, ripe tangerine, which is layered over a heavy, earthy, and slightly spicy base. It’s a very complex profile that has only become more refined during this final week. ​🌡️ ENVIRONMENT & VPD Conditions are being kept stable for the finish. Current readings show 24.8°C and 46% humidity, which keeps the VPD at a solid 1.65 kPa. This environment ensures the resin stays fresh and the dense buds remain safe from any moisture issues during the final days. ​💧 NUTRIENT FEEDING & WATERING The flush is in full swing! I started using only plain, pH-regulated water on Thursday (2nd April). She is reacting perfectly to the water-only diet, pushing out the last of her resin while cleaning out all residual nutrients for a superior taste and clean burn. ​Current Feeding: Pure Water Only (Flush in progress since April 2nd) ~~ Citric acid (1.2 ml/l) ~~ ​💭 GROWER'S NOTE Week 13 (Flower Week 9). We are watching a masterpiece finish. The trichome coverage is insane, and the fruity-meets-earthy scent is a dream. I am monitoring the amber count daily now. We are looking for that perfect window to chop within the next 7-10 days. The excitement is real!

Candyman is now 99 days old! Day 49 of flower and they are looking unbelievably beautiful and smelling crazy strong. I am aiming to do one more feed and then a 7-10 day flush if they are all ready anyway. I really am gutted i couldn't take cuts of pheno 3 😭 all in all I'm super happy with this run. Update: day 53 of flower and they just look unbelievable 😍 nearly time for a 7-10 day flush. I've now lowered the light intensity for the final weeks

Yesterday some recharge because she was dry, today some calmag and some gaiagreen bloom

This week i did LST on the gorilla cookies. The nugs are starting to fatten on a couple. Looking good so far 😎. Also the yellowing went away after a good few days of flush. Now rhey are on half of the recommended does of nutes.

Hi Growmies, I feel I had a root issue, may have even been root rod. So as I saw a few of the very deeply submerged roots turning brownish and decay, I decided to generously cut away the affected areas and cleaned everything with hydrogen peroxide as good as I could and then properly rinsed the whole system. It seems, however, like she has started a whole new set of roots that started to submerge after I started feeding the orca from plant success (can be seen in the video below). Can highly recommend this product! She has also not show any signs of stress due the suspected root issues. Other than that she is a super pretty indica lady :) almost crazy how symmetrical she is. I have trained all main colas horizontally until the canopy had evenly opened up. Now I will let her grow towards the scrog and depending on her stretch, I will flip her at some point towards the middle or end of next week. Here is the code that’ll give you 20% in Zamnesia‘s online store, just input ZAMMIGD2023 at checkout. Thanks for stepping by and until next week!

What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !

👉Its week 11 and the plant is looking beautiful. Lots of bud sites all over the plant. The plant is looking healthy and seems to be thriving. The tips of the leaves on the new growth at the top of the plant show a brown. I had a day when the outflow of the fertigation was +30. I did a low EC fertigation right away and more regular EC. Since then Ive kept the run off within 10 by preceding ever other fertigation with a low EC feeding with just enough volume to get a few mls of run-off. On the GHE drain to waste feed chart Im on Mid-Bloom mixture. I am guessing it may be 2-3 weeks before its in 'late bloom' stage. Im still mixing full strength and the EC for a batch is 1.5ms. While I believe that by allowing the run-off of fertigation to reach +30 is what cause the brown tips. Im also mindful that I may need to dilute the batch a little. To see the effects of nutrient/media issues it can take a couple of days if its subtle. So if I continue to see the bright green tips of new leaves turn brown then Ill lower dilute the mix. Ive seen no other possible indicators of negative issues. 👉The plant is filling out nicely all over. Marble sized fuzzy pearls are scattered all over. There isnt much aroma besides the typical young cannabis plant smell. Ive squeeze a couple small buds, there are visible trichomes and its sticky to touch, but no notable aroma. The trichomes are coming out all over the place and it should make for a very fuzzy plant. 👉I have removed a couple more small branches and shaded leaves and will only take vegetation that is showing issues or totally shaded and showing lack of vigor. I have installed the bamboo steaks that I will use for support for the branches. I attach them to the metal posts attached to the hoop around the base of the pot. This keeps the steaks out of the media. The Plant is 36" and the early flower stretch seems to have slowed. I have 6 more inches of light adjustment height before I have to resort to spreading the light supports and angling the lights to allow for more height. 👉This coming week should be more of the same as 99 slowly matures. I have a new fan that I may install. Currently I have a 4" 190cfm exhaust fan (vented outside). I anticipate as temperatures drop outside my tent temps with rise like they did last spring. Im not using a cob light this time and surprisingly the temps have stayed steady at 78-80. The new fan is a 6" and 440cfm. I have a variable speed controller to use on it and will hopefully be able to have more control and success at maintaining cool temperatures better during the more mild weather (sounds convoluted I know).

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

2.3.2024: More of the same. "Plants" are getting bushier. 2 Nodes with the 3rd coming through. Look healthy. Top soil is dry but a few millimeters below is still moist. Once the 3rd node fully develops i'm considering topping but we'll see. Definitely can tell the Crystal Meth has a different structure then the Emerald Fire OG. I'll add pics at some point today 2.4.2024: Watered 32oz at 6.3ph. No run off. 2.5.2024: No water today. Plant is still super moist. Temp hovers around 77-79 and RH has been struggling to stay at or above 60%, even with the humidifier on and the inline fan speed at 2. I've increased the humidity output with the goal of getting it to the 60%-65% range. Leaves are getting bigger and everything is nice and green but i'm surprised at the lack of vertical growth. Its only day 17 from seed so we've got time. Just raised the light to 14 inches from soil and increase power to 50%. 2.6.2024: Moving along nicely. Plant is a little stubby. Nodes are tightly spaced when compared to the Emerald Fire OG. Perhaps thats just the difference in genetics? Raised the light again to 16 inches from soil with the hope of inducing some vertical growth. 2.7.2024: No change to current state. Struggling for lower shoot development due to fan leaves blocking light access. I couldn't help myself so i clipped the single leaves on the bottom of the plant. Probably a big mistake but it'll be a learning lesson if it comes back to bite me. Not much change in vertical growth so i'm thinking about raising the light an inch or two to see if that will help them stretch. Watered 64oz of 6.3ph. Small bit of run off, ph also at 6.3. 2.8.2024: Day 20 from seed. At the moment, the very small haircut i gave the plant didn't seem to have any adverse affect. Lamp at 14 inches from top of the plant, still at 50% power(75watts). Fan leaves are nice and full but rather stubby without much outward growth so I can't really LST or even leaf tuck. There are 3 sets of shoots that i'm struggling to give ample light. Not sure when/if to increase power and/or change height. 2.9.2024: Day 21 from seed. End of week 3. Plant looks healthy but leaves aren't as flexible when compaired to prior days. Wouldn't say crispy or brittle, just a little firmer to the touch. No nutes given yet as the FFOF still has amendments the plant is using. First sign of sex showing too.