It is the end of week 7. Nice development on both plants, love that the right one has finally caught up in height, they will probably be harvested a few weeks apart. Need to start looking into getting a drying tent in order since I won't be able to chop both at the same time. Think I started to develop a little nutrient burn on the tips, but will continue on with what I am doing as far as nutrients.

Talk about a mission accomplished, dam you Lamby… you had me excited at one point when I thought you were an auto, but to my shock, you are a regular, you just have a long ass flowering window… at least unlike her sisters within the 4th cycle, she did not reveg she just focused on flower, the buds are bulky and firm, scent is amazing, you would mistake her for a cheese strain. I should not be disappointed by the plant’s size! Because I planted her during winter, and all outdoor or greenhouse(unless you have a GH that is climate controlled), do not grow as big as the would during spring or summer season, and due to this factor, I only got 59g of wet bud. But I have faith the other ladies will produce a higher yields. Last I smoke this strain was earlier late summer or early Autumn, and from smoking to growing now harvest, I wish I am blown out the water with this strain, it’s time to conduct that questionnaire. Or even better go to an established cannabis club, and get them to samples bud, and ask for a review.

By the end of week 6, went on and took the plant of the Autoflower tent and placed it in the 3 x 3 by itself tp begin the flowering process. Gave it water and mycorrhizae.

This is my favorite plant at the moment, she is looking really healthy. I cut back on the nutrients a bit and next week I'll begin defoliating and lollipopping her.

I am probably going to purchase these seeds again. I liked how they all few, and they all were very similar in growth styles so I knew exactly what to expect after the first time. I loved that aspect for sure.

Hello growers day 63 red poison is in the net 😁 well what can I say about this incredible strain 60 days from seed I thought was abit of an ask but what do you no it is possible lovely red/ purple colours absolutely stinks my whole house is humm dinging i had them on a 20/4 light cycle from start to finish and I used biobizz allmix soil with biobizz nutrients and didn’t have any problems I will put a smoke report up when the buds are ready so if you’re looking for a very quick strain this is defo 1 for you super easy to look after and rewards you with stinking buds 10/10 from me on speed and smell and colour 👌🏻 And a very big thanks @sweetseeds for sending the beans for me to test much appreciated and big thanks to everyone who checked out my grow hope it’s useful for someone so until next time be safe and happy growing easygrower out✌️

🌱 Week 3, Day 7 Update: Buds Are Blooming! 🌿 Hey Grow Fam, We're cruising through Week 3, and my girl is really coming on—buds are starting to form, and it's a sight to behold! The girl is growing so fast now, drinking 4.5L a day. She could even do with in-between waterings, in my opinion. She's aiming for the stars and shooting for the moon, getting bigger every day and stinking out my room. I had to tie my light higher up with some rope as it wouldn't go any higher, and shoots were getting way too close! I did SCROG when flipping, and I should've been a bit more strict on it (did it longer), but now I realize why SCROG is used. Imagine if I never used it—she would be way too tall. Overall, I'm so happy with how she is growing and can't wait to see the final product. :) But, as with any journey, we've hit a little bump in the road. Despite keeping our feeding consistent at 850ppm, the runoff readings have been creeping up. Last check-in showed a runoff of 1400ppm. It's got me thinking we might be dealing with a salt buildup in the root zone. To address this, I'm sticking with our feeding routine at 800-850ppm. If the runoff ppm keeps climbing or if our plants start showing signs of nutrient burn, I will adjust accordingly, but as of right now, I'm sticking to the same feed as she looks great! ( If I do begin to notice signs of nutrient burn (excess), I will try to water with a lower EC/PPM, like 700ppms, to bring it down. But if I don't get the results I'm hoping for, I will just flush the plant with 3x the media size of water (just plain pH water) to wash out any old salts and reset the medium. You don't really want to do this with coco depending on what stage your at in flower, veg on the other hand flush.? Sure!, if you really need to reset that medium go for it, (i do see tiny signs of burn but thats fine if it gets worse then i have a problem) Let's stay focused and keep our eyes on the prize—beautiful healthy buds. We've got this! #GrowUpdate #Week3 #BudsBlooming #KeepGrowing 🌱🌿

Bonne continuation

Ill be changing some more nutes later today (Liqui compost)pot4&6 . As well as more LST, HST. Pot1&3 T.A @ 600ppm 5.7ph and all doing very well after the bashing they took on friday.. Well time for some sleep.. 4AM

The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾

This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

-En primer lugar dar las gracias a zambeza por creer en mi en todo momento,y por darme a conocer esta gran pagina y familia, espero que sea para largo esta colaboración. •Hemos germinado 9 semillas, 3 de cada raza, lemon , power plant xl, northern light xl, y que pasadas 48h fueron colocadas en maceteros pequeños, los cuales iluminaremos con un bajo consumo las primeras semanas. •Esperemos que este seguimiento sea más completo y más extenso que el anterior , (que lo edite todo en una noche,aún que me llevase casi 4 meses el jodido proyecto).

WEEK 5 (03/28/2021 - 04/03/2021) Day 38: 03/28/2021 Plants had their first feeding today. It’s been about 3 or 4 weeks giving them tap water only. With my ppm dropping in the soil, I thought now would be a good time. Leaving out the Cal-Mag this feeding. Nutrient mix: 651ppm, 6.0 pH, 71℉ FF Big Bloom: 5ml/gallon (⅓ strength) = 15ml/3 gallons FF Grow Big: 5ml/gallon (⅓ strength) = 15ml/3 gallons ppm/ppm = runoff/soil JB#1 - 960ppm/309ppm, pH 6.9 JB#2 - 1290ppm/639ppm, pH 6.8 AP#1 - 1400ppm/749ppm, pH 6.8 AP#2 - 1190ppm/539ppm, pH 6.8 GC#1 - 1190ppm/539ppm, pH 7.0 GC#2 - 1350ppm/699ppm, pH 6.8 ------------------------------------------------------------------------------------------------------------------------------------------- Day 41: 03/31/2021 Plants watered around 5:30-6:00 p.m. ppm/ppm = runoff/soil JB#1 - 955ppm/653ppm, pH 6.8 JB#2 - 1070ppm/768ppm, pH 7.0 AP#1 - 1470ppm/1168ppm, pH 6.8 AP#2 - 1390ppm/1088ppm, pH 6.8 GC#1 - 1110ppm/808ppm, pH 7.0 GC#2 - 1160ppm/858ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- Day 44: 04/03/2021 Plants watered between 5:30-6:30 p.m. Botanicare Hydroguard was used at half-strength to supplement the roots and as a preventative against rot. Tap water: 247ppm, pH 9.4, 70℉ Botanicare Hydroguard: 1ml/gallon = 3ml/3 gallons pH Down: 11.5ml Mixture: pH 5.6, 285ppm (+43ppm from pH solution) ppm/ppm = runoff/soil JB#1 - 858ppm/573ppm, pH 6.8 JB#2 - 857ppm/572ppm, pH 6.8 AP#1 - 984ppm/699ppm, pH 6.8 AP#2 - 1030ppm/745ppm, pH 6.9 GC#1 - 880ppm/595ppm, pH 7.0 GC#2 - 932ppm/647ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- This week has been much more pleasant than the weeks prior. I believe my plants are finally getting acclimated to the medium and recovering from transplant shock. New growth is looking much healthier. Just as a preventative measure, I picked up some Botanicare Hydroguard to use in an attempt to supplement the roots and bring the pH of the soil down to where I want it. Personally, the pH remains just a tad too high for my liking this week. I would like it more in the range of 5.7-6.5 but I'll give it a week or so to see the reaction to the Hydroguard. I've continued with more LST on all but the Glookies #2. On this plant I simply did a topping. It was a risk, considering the plants isn't vibrantly healthy, but I need to maintain it's height. I also did a second topping to the American Pie #1. As can be observed from the photos, not all of the plants were shaped the same way. I got creative with the fabric pots and I decided to LST a few plants a little bit differently just to see which technique/style I liked the most. So far, I am digging the way the Jelly Bananen #1/#2 and American Pie #2 are shaping up. They are going to have a beautiful, wide canopy when they head into flower. I'm considering transplanting into 5 gallon fabric pots within the next week or two so I can flip them to flower two weeks later. My intuition is telling me this has been a pretty lengthy vegetative stage, thus far. I'm expecting all of my plants to double in size during the flowering stage, which should be anywhere between 65-70 days long. I made sure to select strains with similar flowering times (60-70 days). Thanks for stopping by this week. Please feel free to leave a comment or any tips/advice! Until next week! 🙏

Ok guys we are starting week two of this pineapple chunk strain from Barney's farm. So far everything is looking good and healthy. I gave her her first worm tea and have been stressing her stem with light flicks and slow bends since day 2. I've been increasing the light incrementally every day and it seem to take it all as it comes. I hooked up a diy light mover in the garden increase light impact and decrease possible dead spots in the growing space. All and all it's been a easy week with this strain and everything looks promising so far. Thanks for checking out my grow. If you like Barney's farm genetics or pineapple chunk specifically or if you are interested in organic/ living soil growing follow along and lets watch her grow together!

Deliciously grow, without problems - super fine and satisfactory result. Unfortunately I forgot to weigh it wet, but I will update with the dry weight as soon as it is dry - but a good bet is that it has been about 200+ grams wet and there will probably be about 50 grams dry. I have added some videos from before and after, the top cola was cut - and some close up photos 😘 Update: 42 grams in total 😍 She taste so damn nice, super great !!

12. Woche in den nächsten Tagen werden beide Phenos geerntet um Platz zu machen für die nächsten Pflanzen

Overal I’m very happy. The weight’s looking insane. Obviously imma update you after drying and curing. Can’t say to much at this point, apart from the fact that everything is looking very nice!

Today I top dressed everyone with a full strength feed of nature’s pride bloom, compost, added bacteria, kelzyme calcium and a handful of promix. This will be the last feeding for both the blackberry breaths. It looks like everyone else is going to go 9-10 weeks so they will get 1 more feeding. Either way I’m going to harvest everything at once so the bbb’s are going to get extra ripe. The frost on the one pheno is insane. Smells are amazing so far too. Will report smell after drying. I just grabbed a full organic nutrient line for use in my next run. I got more of the nature’s pride veg and bloom dry amendments, boogie brew tea, kelzyme xx calcium, EM1 microbes and method 1pps spray. I will also be using Alaska fish emulsion (5-1-1) worm castings, WOW mycorrhizae and a pre inoculated 50/50 coco promix blend. Seeds came in!!! They hooked it up fat too. I got the 12 dolato seeds I ordered plus Slurricane F1 x6 and puro loco x6. The puro locos are going to be used for outdoor and I might do a little pheno hunt of the slurricane this year. The F1 is supposed to be better or more likely to show genes from both parents. Can’t wait! So today I forgot to water and it really looks like it shocked them... they all drooped like crazy and yellowed out more. I got them all watered and raised the light to ease some of the stress. Worst time possible to forget a watering!!! Won’t let it happen again. I was reading that PPFD levels over 1000 require added co2 and my light is well above 1000 at 8”. That could also be another reason my plants yellowed out so quickly. Next round I’m going to up the nutes and get one of those bottles of co2 and see if they make a difference. I would have to keep my filter on a timer so it wouldn’t deplete so fast. Or just use it for the parts of my grow that doesn’t need a filter. I didn’t even need the filter until week 3-4 of flower. I cleaned the sock on my carbon filter and now it’s just sucking the life out of my tent. The humidity went from being too high to being too low. Going to lower the speed until the humidity is proper. This tent isn’t that old and that filter sock was disgusting. Going to try stablizing my RO water with a bit of snow in the winter and rain in the summer