By the looks of the trichomes this girl is ready I will let it go one more week because the weather forecast seems to be sunny but if anything changes to Everyday rain I would chopper her down to protect the flower. Thank you for reading and I will continue to update have a happy grow.

🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 👤 29.3 ... 👤 30.3 ... 👤 31.3 ... 👤 1.4 Begin to see a swelling of the flowers, it was time: D begins to feel a slightly sweet scent but we wait a little longer to feel the veterinarian characteristics of this beauty. Viparspectra always works to the maximum, I am enthusiastic about this lamp, I can't wait to mount the XS1000 too. in a week I will soak another seed, I hope to catch the colored one: p 👤 2.4 👤 3.4 👤 4.4 __________________________________________ 👀Are you looking for a good lamp to start?👀 Viparspectra in my opinion has something more than the others, take a look at their site. ➡️ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩Use " GDVIP " for an extra discount💯 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 70% Indica / 30% Sativa 🎄 Genetics ▪️ Sirius Black 🚜Harvest ▪️ 450 g / m² 🌷Flowering ▪️ 63 - 70 days ✨THC ▪️ 25.0% ✅CBD ▪️ 0.5% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 ____________________________________________________________________________________ 👀📷 Follow the best photos on instagram 📷👀 https://www.instagram.com/dreamit420/ 🔻Leave a comment with your opinions if you pass by here🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

Muy bueno un que se me complicaron algunos detalles muy pocos pero el resto todo bien actualizare en 2 semanas para lo g en seco

11/06/25

Amazing experience with the Mix Pack, I will try it again next summer for sure. Love the variety.

Week 11 (10-4 to 16-4) 10-4 Temperature: 24.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 60% (highest) 52% (lowest) No pictures. Added 10L to the reservoir, and turned it on for a couple of minutes. 11-4 Temperature: 24.4 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 52% (lowest) 12-4 Temperature: 25.5 degrees (lights on) 22 degrees (lights off) Humidity: 65% (highest) 57% (lowest) Turned the reservoir on for a couple of minutes. 13-4 Temperature: 26.5 degrees (lights on) 23 degrees (lights off) Humidity: 65% (highest) 56% (lowest) 14-4 Temperature: 26.4 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 45% (lowest) Turned the reservoir on for a couple of minutes. The reservoir is almost empty, there is 850 ml left. 15-4 Temperature: 24.4 degrees (lights on) 20 degrees (lights off) Humidity: 59% (highest) 49% (lowest) No pictures. 16-4 Temperature: 23.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 60% (highest) 53% (lowest) Today i defoliated both plants heavily for the last time, you can say i did a method called: schwazzing. Dont know why but while i was defoliating the Chemdog smelled a little bit like soap haha. Turned on the reservoir for a couple of minutes. (Till the AutoPots are full and the valve closes) Rised the pots aswell, so the canopy is very even. I let them recover from the heavy defoliation i did, and next week i will slowly increase the light's strength. (Now still at 50% 50cm)

I am extremely satisfied with the biotabs fertilizer, something incredible. and no PH water adjustment 🖕🏼 one shows a slight lack of magnesium. I will not deal with it at this stage, but next time I will put the lights higher.🤘🏻 -and the buds are incredible for 4w blooms BIOTABS: …….. is still the best organic fertilizer I've tried. incredibly good and simple and I only applied it 2x🤘🏻 in 1w and 4w🌹

🌸 Week 3 Flower – Growing Strong, Tall, and Vibrant! 🌱 Hey Grow Fam! It’s already Week 3 in flower, and I’m thrilled to bring you this update because these plants are doing phenomenally well! Some are stretching up so tall that I might have to get creative in the coming weeks! Fruit production is well underway, and it’s absolutely amazing to watch the canopy fill out as these girls reach their potential. Aptus Holland Pack Unboxing & New Additions This week kicked off with a big arrival: the Aptus Holland nutrient pack! 🙌 I couldn’t wait to share the unboxing with you all; there’s a video up where I go through all the goodies, so check it out if you haven’t yet! Between the photos and videos, you’ll be able to see just how well these nutrients are already feeding these green beauties. Having a blast sharing more content lately—I’m in the zone with editing and creating, so get ready for even more shares! 🌡️ Environmental Control and Fine-Tuning the Reservoir pH Temps this week have been holding around 27.2°C with RH at 65.2% and CO2 at 800 ppm, creating a VPD of 1.26 for ideal flower development. The lighting intensity is at 833 PPFD, and the solution in the reservoir is fine-tuned to a pH of 6.22, EC of 475, with a temp of 21.8°C. Let’s talk pH in the reservoir: it’s a dynamic process, and I’m constantly adjusting it to keep everything at the right level. The pH tends to rise throughout the week, and each day, I work it back down, fine-tuning it to keep those plants happy and balanced. Managing pH is truly a hands-on job, and it’s worth every moment. I love staying on top of it for optimal nutrient uptake—it’s all about consistent effort and keeping that perfect range dialed in. Leaf Maintenance & Selective Defoliation These leaves are HUGE and gorgeous, creating a lush canopy that’s nearly too perfect! I’ve been taking a few leaves here and there, focusing on leaves that may be blocking light from reaching lower parts of the plant. Selective defoliation at this stage is key because it opens up airflow and allows light to penetrate deep, boosting energy distribution across the whole plant. Big, healthy leaves mean we’re getting excellent photosynthesis, but a gentle, strategic defoliation can guide that energy toward those developing buds. Leaf removal is all about balance, giving the plant space to breathe and thrive while still maximizing growth in flower! 🌐 TrolMaster + App – Real-Time Precision Huge shoutout to the TrolMaster system and the app—keeping everything in sync and at peak performance is honestly effortless with this ecosystem. The app provides a full overview of each environmental parameter, allowing me to make real-time adjustments as needed and track trends over time. The precision here is unbeatable, giving me complete control over temps, humidity, CO2, and VPD, ensuring my girls are in a controlled paradise 24/7. What I love most is how the app records everything automatically, so I always know exactly where things stand without having to keep separate records. If you haven’t tried TrolMaster yet, it’s a total game-changer for any grow setup! 💥 Shoutouts & Gratitude Massive shoutout to TrolMaster and Aptus Holland for powering this grow with tech and nutrition that’s second to none. And, of course, gratitude to Pro-Mix for the superb growing medium and to the seed banks behind the genetics. We’re running strong thanks to each of you. And to the whole community—thank you, everyone, from new friends to seasoned followers, lovers to haters. Your energy, whatever form it comes in, is all part of this journey, and I’m so grateful for it all. Special shoutout this week to my brother Daggadna—head over to IG and give him a follow! And if you’re loving the journey, remember to like, comment, and subscribe—it really helps the channel grow and reach others who may also dig this content! Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

6.4. Die 3 Babys wurden jeweils in 15l Stofftöpfe von Zamnesia 1,5cm unterhalb Erdfläche eingelegt und mit Erde bedeckt. Als Erde wird die 420Grow Erde von Gardenboss verwendet und es wurden jeweils 10gramm von Rhizobacter (RQS) der Erde beigefügt. Im untersten Teil der Stofftöpfe wurden Blähtonkugeln ausgelegt. Die ersten 2-3 Wochen sollen die Pflanzen auf der Fensterbank zur Südseite wachsen und dann in einem Foliengewächshaus (Kesser) auf dem Balkon (ebenfalls südliche Ausrichtung) bis zur Ernte bleiben.

Been an awesome week!😎 Lots of things going on last week.. We started LST, made a few LST adjustments, gave the ladies a haircut, and further refined the nutes👍 Looking forward to seeing some signs of flowering this week. 🙏 I used to believe I was a man of patience 😅 Stay tuned for pics and videos throughout the week.🙌 Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙

Ended up flushing Mumma for about 10 days - got her ppm down real low. Night before harvest I set the timer so the light would not come back on in the morning before I harvested (I've seen people who swear by this and other who say it doesn't do anything but figured it couldn't hurt). At this point the other plants are pretty disappointing compared to Mumma so they aren't getting as much "love" lol.

Hello Everyone 👏, As you can see, are all Cherry Colas growing, they all have a tightrips in their pots for now, for recognition. Will make nicer pictures of them in a few days. They are now 4 days from germination🙏. The humidifier had been added, so I had to adjust the room a lil bit. Seedlings don't need much nutrients, neighter do autoflowers. with normal soil I would recommend to only give water for 1-2 weeks, since it holds nutrients in it as well. But since I'm using Cocos for this grow, I might have to add some basic nutrients in the upcomming week. For this week I gave/give only water turns and Startbooster turns. Update day 5: - Lowerd the lights to avoid stretching. they are now at 75cm distance from lamp to pots. I want them at 40-50 cm, but I don't want to rush it. - Added another layer of cocos to avoid the soil from drying up therefore the roots from dying. This will happen because of lowering the lamps down, the soil will get exposed more to heat. As you can see, the humidifier is doing his thing haha. Pictures and videos where taken without the lights + fans on. because of that, it will look like this. Still fun thought. Enjoy 🙌

Trying to keep the day temperature a bit lower. The growtent is located in my shed. First time in hydro so if you have advice for me I would appreciate. 😁

Very few white pistols left. I have started checking tricomes now for peak harvest time (hopefully) lol. 11/9/22 Added tricome pics and video to this week. Starting to turn milky, which is what I want, so I'll be keeping an eye on her.

(Week 4 Day 1)Day 22) First LST, Gave a deep water with Recharge. Love the co2 Day 23) If your reading this ... have a great day, made sure no leaves are blocking light Day 24) Feeding her calmag,grow, micro at half nutes first time feeding half a gal , more lst, I think I’m under feeding her, gimme turn the lights up a little more (50W)-(55W) Day25) more tiring down and airflow and light for the others dropped lights to 26 inches from light Day 26)slow growth a little worried something is wrong Day27)Fed today same nute as last, plants giving off good plant smell, turn wattage to 60W Day 28) turning Wattage to 75

This was a fun project that was a few years in the making and a year later to see if they would last a season for this upload to happen. Before any of this I would bike aorund town grabbing up all the old Ikea solid pine bed slats that I could find and storing them in the basement. I have a lot of wood down there, any size worked as long as I have enough of them. The hot days to find them were the first and last of the months because that's when people where moving in/out. I also kept an eye on the free section on local online classifieds as well. The entire purpose of this was to recycle as much off the streets as I could before buying anything to finalize the project. In the end I only bought sealer, screws and some takeaway/beers. All the wood was 100% free and salvaged off the streets of Toronto saving it from the dumpster bin. After collecting all the slats for about 2 years I was playing aorund with them on how I wanted to make this work. I had previously done a little project like this before but I messed it up and the boxes where crap. did not last longer then 2 seasons, they where thin and shallow as well could not grow much of anything in them. I Was talking to my friend who is renovating their house and we brainstormed some ideas on the boxes, I found some designs I liked online and said lets make something like this out of what I have here. We tossed out a few of the design features when looking at them as it would have been wasted wood and extra work not needed. If I had more wood them maybe it could have been an option but simple was the name of the game. They taught me what I needed to know like how the miter saw and sander worked, plus all the other tools I was using. They did help out with a table saw and creating the triangle support joints in the corners, They used some pine left overs they had while making a staircase indoors. I did not feel up to the task of using a table saw given all the relatives I know who have lost a finger to them. In the end we decided the design would be three boards high and take an alternating pattern on corners. layer one short, layer 2 long, layer 3 short. Went with a galvanized and painted deck screw so it can take the weathering. Ran into some problems like making everything level as some of the boards were warped and other ones had undesired aspects like knots and tacky sticker goo I could not remove. So I used them for the base that will not been seen so much. Clamped everything down and called it a day. Once it was all done and over with, I then brought them back home from my buddies work garage and started to seal them. I went with a boiled linseed oil as its a food safe option should the wood degrade into the soil I will plant in them. I will need to reapply it to the boxes year after year but the main coat is the most important one and I put it on 3 layers with a good dry in between coats. the inside of the boxes that where coated did not degrade at all as the sun did not hit them so it will not need a new coat just the outside. Overall the end result was very impressive for myself, I've never taken a woodworking class ever and It was a near perfect outcome for me. Heavy Duty Planter Boxes for all my gardening needs. I made a last min decision to add in a plastic liner to preserve the wood even longer and stapled that into the frame. it has held up quite well and may need replacing end of 2nd or 3rd year out in the sun. Used a thick moisture wrap plastic with UV protectors in its formula. Lets see what I can grow in them this year! m0use's haus of projects - garden box edition

I started with 1L of tap water left uncovered 24hrs for evaporation of chlorides. I then added formulex alongside Regen (drop for drop) until e.c. reads 0.4, and then Ph to 6.3. Coming along nicely nothing to majot to comment on :)

I think 💭 that I might just grow this for a third time the yeild was amazing plus almost a half pound in hash. IM in love with SeedsMan early skunk00