Hi guys This week we done some lst on the potnoodles, the wifey got a extra node from the bottom, while my plant developed aids lol all fun tho, I got 2 x cheese autos 2 stardawg autos and another blueberry auto in there, all from fastbuds so should be a full room I the next 10 weeks. Happy growing guys

Really stoked with the outcome of this grow, I was aiming for a good 60g, so i outdid myself some bit. On to the next one!

Test

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone :-) She becomes a beautiful bush. It was poured twice a week with 1.2 l and once with 1 g enhancer per l coco. Furthermore, I continued to train her with topping because this time I want a real bush :-). Have fun and stay healthy 👍 You can buy this Strain and Nutrients at : https://greenhouseseeds.nl/ ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Green House Seeds Company Cup Clone 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Coco ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

Day 115 since seed touched soil. Twins are done. Was very nice plants to grow, waiting for results ... Happy Growing !!!

There we go, now the diary is all sorted out and the weeks are accurate. Pistils still poppin'! Starting to get the first few brown pistils to show up on the low low plant buds. Tops are still filling out. I might as well raise the dimmer to 10. It's been on 9 about 11 inches from the tops of the plants. I dialed it back to perhaps reduce the stress from the hot dose of nutes. They burnt up pretty good but still rocking! Hopefully the next run i can keep them pretty for the full crop! haha The Nutrient mix i listed is not a feed chart regiment. I've had to dial it back a bit because of the high ppm of my tap water which caused me to give them a hot 2500ppm feed one day and they freaked out lol. So now i test my ppm and i try to keep it around 1000, to 1250ppm MAX Next crop I plan on doing some experimenting. I'm going to grow 3 strains. I want to do a diary for each strain and I'm going to experiment with some different nutrients (Remo Nutrients) and I'm going to do side by side comparisons with Hygrozyme and HygroBen, as well as Resin by Green Planet Nutrients. Next Strains will be; #1 Female Seeds "Lemon Kush" (2 plants) Clones #2 Barney's Farm "Biscotti Mintz" (3 plants) Clones #3 Expert Seeds "Oreoz" (3 plants) Clones 1 of each plant will be treated with Mykos Fungi, Hygrozyme Enzymatic root enhancer, and HygroBen which is beneficial bacteria. So we can draw a side by side comparison of each treated vs. non treated plant to see if Resin really does increase resin output, and if the plants health, vigour and growth are affected in a significant way. These plants on Oct 31, are 42 days into their flowering cycle. I expect them to finish near end of November. Nov 15 i will cut clones off my mother's and prepare for the mid winter run.

She looks so amazing with those fat colas, very dense and sticky, beautiful strain to grow same sweet cherry strawberry aroma just like her sisters. 🔝. I could grow her endless times

Bueno resumiendo cookies gelato es una variedad híbrida muy fácil de cultivar pero ojo, cuidado con los últimos riegos si no queréis perder cosecha por moho. Lo demás de 10 pegada heavy sabor increíble, cogollos duros como rocas y bañados de una gran capa de polen. El ambiente del secado se mantuvo en 23 grados de media y la humedad estuvo por debajo de los 45% en todo momento. Poco más la verdad estuve encantado de poder cultivar una genética tan potente . Un saludazo que paséis un final de año increíble y por supuesto buenos humazooos💨💨💨.

This week we did some more garden maintenance, cleaning up the green house removing any weeds growing under the pallets. We also did some preventative maintenance , spraying Flying Skull's Nuke Em on the ladies.

Sativa dominant, gotta be patient with it

Coming along very nice now and bushing out nice too , The side branches are as thick as the main stem and showing the early stages or pre flowering , Still not done a great deal too this lady and have left her too do her thing ,

I'm 2 days early but here's a tent tour, still not sure about the rusty spots but I don't think it's that big a deal. I'm pretty sure lightly feeding with just the bloom booster was a good call. I'll keep doing that untill she matures out. I have spider mites ;-; good thing she is about to mature. I'm going to call 3 more weeks, might chop slightly early if I can't deal with the mites anymore, visibly affected leaves have been removed due to possible eggs

fast eddy measures 60 cm, the 3 gelato cookies between 70 and 80 cm, the 3 northern light from 90 cm to 1 meter 20, the smell is stronger when the tent is opened, major heat problem solved thanks to a portable air conditioning🍀

Mites are still a problem ive come to terms with the fact im not going to fully be rid of them so im maintaing them with lady bugs. I will be flipping bery soon watch for the next update!! They are looking beutifull!! Ive decided to take clomes of in house indica as well as cheese. Ive also begun the beginning stages of germination for another @greenpointseeds purple chem seed so be tuned for that. Will also be doing an @greenpoint seeds purplecake diary so make sure to stay tuned, stay lifted and keep growing😎😎😎 make sure to go follow my instagram @grow_ers4life

Very happy with the results for my first grow. Didn’t have any deficiencies. Only issue I ran into was some bugs. Ended up with white springtails but they didn’t affect anything.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. My homework. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration.Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Come walk in the enchanted forest.

Plants were watered on day 4 of week 9, as follows: Lucy: 1 gallon water, pH: 6.27, Height: 22 in. Herbert: 1.25 gallons water, pH: 5.77, Height: 24.5 in. ***Both fed nutrients - 5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 7 ml/.5 gal BioBoost (1% Phosphate), and 1 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) Plants were watered on day 5 of week 9, as follows: Thin Mint Sr: 1 gallon water, pH: 6.76, Height: 20 in. Thin Mint Jr: 1 gallon water, pH: 6.50, Height: 19.5 in Notes: Thin Mint Jr has nutrient burn and so was NOT fed nutrients today. Thin Mint Sr was fed nutrients at 50% strength 2.5 ml/.5 gal BioVega (3% N, 1% Phosphate, 5% Soluble Potash), 4 ml/.5 gal BioBoost (1% Phosphate), and 0.5 ml/.5 gal BioRhizotonic (0.6% Soluble Potash) (both plants still in nutrient distress - in process of recovery but have some new growth that is greener so improvement is being observed; slowly but surely!) ***Plants ideally would have been transitioned to the flowering phase this week, but due to nutrient deficiencies and nutrient burn on Thin Mint Jr., we are holding off on this transition for 1 week to give the plants a chance to recover from stress.

Week 16 november - 22 november

Pflanzen entwickeln sich unterschiedlich Pflanze 1 hat vor einer Woche aufgehört in die Höhe zu wachsen und die 2 erst diese Woche !