hey there! critically not enough in height, but have what we have, dimmed the cob from 2100 to 1450 approximately, keep blooming ;) piece!

Hey fellow green thumbs! 🌿💚 It’s harvest time for our Auto Fat Pete’s Cookies from Super Sativa Seed Club! After an exciting journey, we’re thrilled to share the details of this unique plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our Auto Fat Pete’s Cookies was harvested yesterday. While the flowers turned out less dense than expected, the amazing smell has us super curious about the final product. 🌿🌸 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Fat Pete’s Cookies: • Bud Structure: The buds are not as dense as we’d hoped, but they are still sticky and resinous, showcasing a beautiful array of green hues with hints of purple and orange pistils. • Aroma: The aroma is incredibly strong and delightful, filling the grow room with a sweet, cookie-like scent that hints at the strain’s name. 🌿🍪 • Trichomes: A generous layer of trichomes covers the buds, promising a flavorful and aromatic final product. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Fat Pete’s Cookies: • Characteristics: Known for its sweet and cookie-like aroma, this strain has shown remarkable aromatic qualities throughout the grow. Despite the less dense flowers, the strong scent and generous trichome coverage promise a high-quality final product. • Harvest Expectations: Sweet, aromatic buds with a rich flavor profile. The slower drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ The aroma of a cannabis plant can be a strong indicator of its final flavor profile. Strains like Auto Fat Pete’s Cookies, with their unique and strong scents, often translate these aromas into delicious, flavorful buds. For a detailed grow guide and to see this strain in action, head over to my YouTube channel! 🎥✨ I share tips, tricks, and in-depth reviews to help you get the best results from your grow. This week’s harvest has been particularly intriguing, and I’ll be explaining the reasons behind the less dense flowers in detail. 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Fat Pete’s Cookies at Day 75 has been an interesting and rewarding experience. While the buds are not as dense as we hoped, the strong aroma and generous trichome coverage give us high hopes for the final product. With the plant now drying, we’re eagerly awaiting the final outcome. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a sweet and aromatic harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #FatPetesCookies #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT7-DOGDOCTROSO 17% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off

Day 36 (1/11/21) Nutes: Veg A: 3.83 g/gal Veg B: 2.58 g/gal PPM: 1050 Water temp: 59°F pH: 5.7 Day 37 (1/12/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 59°F pH: 5.7 Day 38 (1/13/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 60°F pH: 5.7 Day 39 (1/14/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 62°F pH: 5.7 Day 40 (1/15/21) Nutes: Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1150 Water temp: 62°F pH: 5.7 Day 41 (1/16/21) Started running a RO:Tap water mix as recommended by Cropsalt FAQ instead of ph adjuster. PPM comes out about 20ppm higher but that’s no problem. Nutes mix: RO:TAP = 15:1 or 120oz:8oz Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1350 Water temp: 62°F pH: 5.8 Day 42 (1/17/21) Starting flower tonight, 12 hours of darkness tonight and for the rest of the grow. Nutes mix: RO:TAP = 15:1 or 120oz:8oz Veg A: 4.6 g/gal Veg B: 3.1 g/gal PPM: 1350 Water temp: 60°F pH: 5.8

Started the week with a plastic dome to help with humidity, and after six days the dome was not needed anymore. The seedling outgrew the dome. I keep the watering very light during the seedling stage to make sure there isn’t any overwatering. I take my photos about 24 hours apart

Alle sehen sehr gesund aus. Wachsen wie sie sollen und fangen langsam an herrlich zu duften. Mainlineing und toppen habe sie sehr gut weggesteckt, aber bei den Genetiken von @fastbuds ist es auch kein Wunder. Wir sind gespannt wie es weiter geht.

Day 16 Tue PH 5.7 EC 0.6 DLI 18h PPFD Water 24 Day 17 Wed PH 5.9 EC 0.6 DLI 18h PPFD Water 22c Day 20 Sat PH 6.0 EC 0.6 DLI 18h PPFD Water 25c

This girl kept me busy this week. I had to clean up the bottom of her as I have another plant that has a touch of powdery mildew so I have to be careful going forward. She’s free of it thus far though and I plan to keep it that way! She has been stretching out and starting to really kick into high gear flower wise this week. I tried a different feeding routine and I think she isn’t totally digging it as I have a little clawing going on so I’ll have to go will just plain water to get her balanced out again. I dug out the straw mulch I use that had a bunch of top dress amendments and replaced it with some fresh straw and no amendments. She’s been easy to stress in that sense. Not a hungry lady at all. All in all I am happy with the progress of this sweet seeds lady! Looking forward to another exciting week! 😎🍿

Welcome to Flower Week 3 of Divine Seeds Divine Rapier I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Divine Rapier: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧Strain Info : 29% • ⏳ Flowering Time: 6-7weeks

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 It's been a good week! We're really hurting for calmag but we just placed another order, we hope it arrives before their color slides anymore.. all plants were overfed about 1.5 weeks ago (I blame my husband lol), they are still really dark in places with some clawing but are starting to bounce back.. the node spacing is fantastic, the Solux350 @75% is a ton of light, we raised another few inches until we get some more calmag in them..not too much else to report, thanks for dropping by and happy harvests everyone!! ❤️🌱💡 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

So we are approaching the end of week 4 and she is in 100 percent flower mode now, she's looking a touch pale as I gave her a water through to check the EC which came out at 1.0 and since then I've been waiting for her to dry out and now she is on full dose of everythin which is an EC of 1.9-2.0 The stretch finished about Wednesday/Thursday this week and i would say ive still got a bit of head room so the next ones I might let get a bit taller Hopefully in about 4 weeks she will be ready for the chop, im anticipating some proper weight and resin production in the next 2 weeks 🤞 Happy growing everyone!!

👉Alrighty Then👈 👉Cherry Punch F1👈 week 7 of flower Everything is looking good 👍Having issues due to using my well water , it's hard so I'm having slight issues but I am on it ..... So i continue to modify the nutrients to accommodate flower ..... Soil by Promix Nutrients by Cronks Lights by MarsHydro.ca FC4800 X UR45 X Adlite Deep Red And Blue Tent 4x4x6.5 & Equipment by MarsHydro.ca High reflectivity inner mylar Thick Oxford fabric Smooth heavy duty zipper Sturdy metal frame Zipper blackout cloth Good anti light leakage performance The 6in Inline kicks ass moves alot of air ●Blue Light Effect: Blue light shortens internodes, resulting in shorter, stronger plants, ideal for supporting fruit development later. During vegetative growth, blue light promotes lateral branch development effectively. Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

hey guys so here is my f.b.t 6 tester coming along ok may be mutated but i will grow out another few weeks to see how forms before i scrap . temps outside here are soaring so my Aircon unit is running at full power and have started running my Aircon water through my r/o setup and adding 5ml of calcuim and magnesium supplements to each 3 gallon bucket water i produce . So far so good til next week . 😀

Week 5! All those pic are from the same day. First pic is before transplanted in 11 liter pot ( I took off the weakest plant cause just 10 fit in my box) the soil is made of light mix and warm casting but I top dress with: 70/30 of 444 and 284 - 1 Tbsp per gallon Rock dust -1Tbsp per gallon I sprinkle the root ball with mycorrhiza and water with compost the of warm casting and molasses brew for 24 hours. Then I put the scrog net and bend all the plant under it, I use the cropping technique cause most of the plant were quite strong as u can see from the pic. Ps: don’t mind about the sound of the first video I’ve just been unlucky cause they pass in front of my house while I was make the video😂

Este sueño es posible gracias a Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster, sin ellos esto no se podria cumplir . 💐🍁 Dynamite Diesel: Royal Queen Seeds se ha asociado con Tyson 2.0 para ofrecer la genética desarrollada por este campeón en forma de semillas. La Dynamite Diesel recibe su nombre en honor al apodo de Mike Tyson al inicio de su carrera, Kid Dynamite. Es un cruce entre dos variedades míticas, la Sour Diesel y la Skywalker OG, que son conocidas por sus intensos sabores y sus efectos estimulantes,tiene un 22% de THC, lo que la sitúa en la categoría de peso crucero. En interior, esta variedad crece a alturas de 100-150cm y produce hasta 550g/m² tras una fase de floración de unas 9 semanas. Al aire libre, puede alcanzar hasta 2m de altura y produce una cosecha máxima de 675g por planta. 🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/rqs-semillas-cannabis-tyson/664-dynamite-diesel.html 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Gran primera semana, ella ha dado un gran estiron estos días, si sigue así será una gran cosecha. Esta semana se practica defoliacion, poda de ramas bajas y se le agrega Sticky Fingers . La carpa está ocupada al 100%, sigue una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. Potencia de la lámpara: 70%

week 6 last vegetative week, due to tent size no pre flowers yet no thrips this week. leaves with 9 tips now 57cm height (+ pot) flowermind (4ml + 0.5g) LST + Defoliation + bending started putting some banana skin on a jar filled with water for flowering looking pretty, right?

Week 13 (Harvest Week) M14 Day 85 - 24/0 (12am-12am) Not check up M15 Day 86 - watered regulars . Not ph. Left only 1 light dimmed at 50%. 24/0 (12am-12am) M16 Day 87 - 24/0 (12am-12am) Not check up 🙏 M17 Day 88 - Dark Period 8pm/ watered regulars not ph. M18 Day 89 - 24/0 (12am-12am) First 24h D at 8pm. Bring electric extension/ for air circulation. M19 Day 90 Jueves - Harsvestday ❤️ Water Regulars/ Harvested autos Bud wash Bk, purple punche big cola only, Hang dry buds, place air 2. Trimmed bigger fan leaves with hands only. M20 not check up M21 water regular, transplant Tools: - scissors ✂️ - bandeja - alcohol - dry paper - extension - jars - gloves Water curing experiment Jar con cogollitos de bk, 2 ramitos de purple punch y demas cogollos de gorilla glue. M19 1st water 11:50 pm M20 at 11:50pm Day 1 M21 at 11:30pm Day 2 M22 at 10:22pm Day 3 M23 at 9:50pm Day 4 M24 at 8pm Day 5 M25 at 9pm Day 6 M26 at 8pm Day 7 Dry process Secador 1 hora, secando en la interperie Necesito - malla -agua destilada Driying Process Temp 18⁰-22⁰ Humd 55-65% M19 Day 0 Harvested M20 Day 1 - T34 ⁰ H40-70 M21 Day 2 - T33 H55 M22 Day 3 - T32 H50 M23 Day 4 - T30 H52 M24 Day 5 - T25 H70 dif loq M25 Day 6 - T26 h75 M26 Day 7 - T25 h80 M27 Day 8 - T23 h80 M28 Day 9 - T25 H80 (Pp bud test was amazing, crazy body high, mind as well, munchies, cotton mouth. The smell is super strong but im too used to it.) M29 Day 10 - changed to warmer place, T30 H55 M30 Day 11 - T25 H80 M31 Day 12 - curing process jar buds Will open jar every 24h for one full month. First smoke july 1st ❤️

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.