This lovely lady is suffering from a little bit of what appears to be a calcium deficiency which is being remedied now with some calmag. Other than that she is doing great. The buds are fattening up real good. She is starting to develop some minty notes and is frosting up nicely.

These photos were taking yesterday and I meant to post than but here we are. They seem to be doing well, growth seems to be picking up a bit but I've noticed slight burns and I think I just started nutrients a little bit too early. A new addition to the tent is a 4th seed I planted today, I'm goign to breed the best female and male, hopefully I get two females and one male but well see.

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. 1.2.25: Watermelon 🍉 has started flowering. The size and shape of her is quite laughable 😅 Retrospectively I started the LST too early and went in too heavy with it too. That obviously wasn't a great idea. Still, this is my first run attempting to do LST, and I have a whole bunch to experience and learn from here! 😅 We may get lucky with a stretch. Who knows right. I remember this one was supposed to finish really early, like 10 weeks or something so hopefully will get at least a bit bigger 🤞 Also the new growth is still a little bleached out. Hopefully the switch to a functional PH meter will correct the imbalance which may have occurred due to my previous one packing up. Snipped another couple leaves which were annoying me 😅 I realised this is one of the pots I put my clay pebbles the bottom of. So I've probably not been watering enough, as she's right at the back, and assuming all was good because the pot was heavier. Removed a couple of leaves from Bubble Kush

3 Ciclo - Green Tiger - Craazy Seeds (BSF) - https://www.crazyseeds.shop/shop/produto.php?id=38ab2e762664b54d5e3d70cb21e25b2a4276b3c3 Genética: (Early Skunk x Skunk) x Skunk P90 1 - Na decima segunda semana, realizei uma rega com bloom em 6,2 de ph 2 - Infelizmente meu medidor de PH estragou, já faz uns dias que o PH aparece bem abaixo que o normal, por isso acredito que atrasou os buds engordarem 😭 OBS: Utilizo medidor de ph digital, comprei os saches para regulagem do calibrador, mas não estava calibrando corretamente. Após trocar a pilha melhorou a fixação do PH, e após deixar por algumas horas o eletrodo sob agua oxigenada V10, o calibrador voltar a ler PHs mais altos, antes ao colocar na água aparecia 5,5. Agora retornou a 7,5 a 8 que é o correto do PH da minha cidade. Eu estava colocando PH UP então acredito que o PH da terra deve estar nas alturas, vou medir o run off nos proximos dias e realizar um flush para neutralizar o PH da terra em 6,2 Equipamentos/Acessórios: Quantum Board Quattro https://www.armariogrow.com.br/quantum-board-quattro Grow: Flora: Estufa Probox Basic 60 60x60x160 Vaso: Air Pot 10 L Termo Higrômetro: AcuRite Umidificador: Difusor De Ar Elétrico Umidificador 👻👻

These were all pretty Uniform in height and weight even with #3 being replanted 2 weeks in, lots of Haze smell diesel and pungent on the front end and some sweet at the tail, I should of let these go a few more weeks I think it would be better. I have read and have heard that the flowering time the breeders recommend is based on a 1000w set up. and light plays an important roll in yield as far as flowering goes Its all about time. and maybe next time I will grow these to a more perfect pant. but this round as a grower I give myself a 6 out of 10 got some buds to some and turned the trim and larf to hash, not a huge return and the Trichomes were mainly in the 25 micron range with a minimal amount in the 76 micron bag. so My thinking is that these were all small and under developed trichomes, this leans into my theory that they could have gone another 3 or for weeks, Failure has been my greatest teacher and I really enjoy this hobby. Next grow will be an Organic Dry Amendment Auto Flower with new lights no more Blurple import lights. I got my 1st vaccine shot. hope you all are staying safe and lifted. BDH#1 13 oz wet 42gm buds 30gm larffy trim BDH#2 13 oz wet 26gm buds 42gm larffy trim BDH#3 13oz wet 20gm buds 42gm larffy trim TOTAL 39oz wet TOTAL 94 gm buds 97gm larffy buds

Bonjour à tous les padawans et maîtres jedis Merci à tous les growers qui m'ont aidé À @laBOSSANOVA @Jésus @belzebut @vvince @Castafunk @bidou JE ME SUIS RÉGALÉ !

Every plants are all good health I decided to bloom 100%

Week 8 of flowering: This week, only water and a little Ata Clean for rinsing. The buds are finishing swelling and starting to take on a beautiful orange/copper color. The sweet-citrus aroma is already intense, and harvest is approaching.

First week of flower👏 They got 2 hours extra darkness before flip. Not because of scientific evidence, but simply practical. Still looking back to the first weeks of veg. WHAT A MESS and WHAT A MIRACLE 🙏 Coming into flower, they had two defoliation and the latest one was 7/10. Last feed 8/10 Introducing Biobizz CalMag(0.5ml/l) + BioBloom(0.25ml/l)+Topmax(0.25ml/l)+Rootjuice(0.25ml/l) Still 2ml/L Fishmix+BioHeaven(Fishmix will be switched out with BioGrow) 👽👉10/10 VPD is 1.2,-1.3. good airflow above and below canopy. 👽👉11/10 Mild signs of light stress. They will get used to the VPD. Can't wait to feed in a couple of days and see the reaction. Im sure they are really hungry! 👽👉12/10 Waterday** Introducing higher doses of bloom nutes. The Run off PH and EC are all within the limits 👽👉13/10 They lit up after some nutes. They look happy! Let the stretch begin 👽👉14/10 Already see fast growth. Just monitering factors, to make sure the climate is optimal and their are no symptoms. 👽👉15/10 Waterday* Thirsty ladies 👽👉16/10 Last day of week 1 of flower. Everything is going fine, Good airflow, None of the small symptoms has gotten worse, so overall happy ladies! How ever one has a little stunned growth or maybe just a bit behind of going into stretch

Compost tea turned out well, let it go for 26 hours total and geared it towards fungal. Also took some soil samples several days later around the stalks and found a lot of nematodes and protozoa which is what you want to see. Lots of different types of nematodes so what your looking for are the bacterial feeders (there are charts online that show you how to identify them). Mycorrhizae can be identified by it's dark colour, uniformity and segmented nature. Testate amoebas live in a translucent shell like a snail and are easy to spot but hard to spot moving due to my shitty microscope, but look for the tentacles. Also found some eggs with movement inside, no idea what they are but they have vacuoles and flagella. She is really getting sticky and smelly now; berries with herb notes. You can see the resin stretching over the trichomes in the last pic. No signs of senescence yet so I'm not going to feed them, they should have plenty of food anyway as this is a second run of the same soil.

Day 55: I have finally moved the girls inside the tent :) On 1 of the 2 girls I see some brown spots, and some yellowing and are thinking something is wrong here? I think it might be a Mag + Calcium Deficiency and I think I should up the PH a bit, but what du you guys think? The other girl looks healthy and fine, although I see some light-green color, but not too much. It might be a beginning of what the other girl is suffering from. I have not measured my run-off water for some time, as I am having trouble with my meter, and are falling back to the color-tester (drops) which are far from accurate. I also got my reverse osmosis system, and I now get 0.08 EC water. My water was 0.9 EC before so I'm happy with that. Also the PH has dropped from 8.5+ to around 7.0-7.5 so I think I am able to make a more stable PH change with acetic acid Thank you for all the answers!. I am now going for ph 6-6.5, and I have also increased the nutrients I use, as I am now using RO water. I am also setting up my lamp from Mars Hydro today, pictures follows tomorrow

10/10 . Two different types.

Second week of flower and I defoliated again. There are small bud sites starting to form at the end of week two flower. The apple fritter has fascination which is making the stems grow interestingly with lots of bud sites.

Everything is really going well this week not changing much at all just trying to keep an eye on the last few weeks

I fed her today!!!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"