Ok guys here they are, just over 1 week of life Fed them and watered today 09.11 400ml per plant PPM - 397 EC - 0.7 Ph 6

Finally time has come to chop down plants 1&2. They look ready and trichomes are mostly cloudy with some embers. Both plants weight 750 grams as whole. I would assume there is around 30-40 grams dry on each, but we would have to dry cure and than return with results. 3rd plant can probably go for another week, she looks like she can get her buds bigger, also still many many white pistils. She is looking very promising with very long buds (: 3rd plant chopped after 1 week, weighs 500 grams wet as whole. Joining the 2 other girls in the closet

First week of vegetation! They are doing very well, they have all grown and I am very happy from now on to give them more cane, as soon as they grow a little more I will plant them directly in the ground so that they have more space.

Safe to say this is where the money shots start to happen xD. All is going well I think, Im trying to water them every day. Not a lot of maintenance needed at this stage if Im honest. There seem only to be a few little flowers under the net that i just pick off; they usually amount to nothing once dried. Hope to get these colas fat and heavy. Peace Charlie

8/9/2018 - All of these girls are doing great and have all shown their white pistils now! The branching on them has taken off and they responded to being topped really well. I’ve switched them from my 4x4 grow tent into a 4x8. I have to say it is significantly better having the extra space to be able to water, move around and for better air circulation with multiple fans. I also believe this will greatly help with light penetration inventory they bush out. I’ve been having issues keeping the daytime air temperature down due to the extream heat wave we have been experiencing. I think I have tackled this issue by running the lights at night now while the temperatures are cooler. Tomorrow is the official switch to flower and will be on a 13 hours off, 11 hours on light cycle for the next 2 days. Then on a normal 12/12 light cycle. IVE read that this can help the plants switch quicker. I’m looking forward to seeing the growth over the next few weeks!

2/13: Stem still seems stretched from the shell being stuck on the leaves. 2/16: Decent heat stress observed an afternoon. Temperature was 80° and the light has been at 100%. Move the light to 26 in and open more events in the tent and window in the room to let in cold air overnight. Time to temperature got down to 62°. 2/18: Heat stress is improving. Keeping her well watered.

Day 10: The plants and the leafs grew a bit in size, they are still focusing on rooting. Added some veg nutrients today to the feeding schedule, because I saw some green spots, not to confuse with full green leafs, which is normal with new leafs and young plants or in later stage a (n)itrogen deficiency. No this indicates that they need just a little bit nutrients. Normaly this would not be the case with normal soil(it has nutrients in it for the first weeks), but again it can happen with cocos as a soil. The leafs on the pictures are like that because the lights are off + the humidifier makes the leafs wet which results in it getting heavy😝. Will update again this week, Enjoy for now 🙌

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.

I'm not happy with the overall harvest...it produced some good tasty smoke due to fine nutes and a wonderfull strain but i fu**ed it up by using a very bad soil...growth was very slow and also lost like 25g due to budrot/mold...again my fault as i set up ventilation the wrong way (RH was good but some buds didn't get enough airflow) Again i learned alot of things and got 275g of good, great smelling smoke...so not that bad...but could be much better 🙂

This week no real issues. Everything seems to be under control. The little runt has really came along way. Taking the plants A, & B out to get pics in natural light was an eye opener!!!!! I did a little more LST on plant B and plant C. I’m a huge believer in LST now huge plus is that when watering it is way easier than a none Trained plant.

Day 49 Flowering : Hi all. A good week for these sexy ladies with lots of colours starting to dominate the white pistils now. #1 is the smallest in height but is not being tight on her bud production and is showing that the small girls can deliver too. Her buds are very tight and solid to touch now. She smells amazing and still has two weeks to really throw out those swollen pistils and calyx. She is beginning to push the trichromes now and with the addition of the Dragon force , she should really get frosty for the finish. #2 is the biggest of the whole group and has a really nice footprint to her. Her main is a huge swelling tower surrounded by castle turrets putting weight on now too. An amazing example of this strain from Exotic Seeds. She alsonl smells so mangonsweet up close too. I cannot wait to hit this lady after harvest now... #3 Is dried and now in a jar curing up. she finished at a respectable weight for her 39 days flowering time . I got 2.1oz of really potent dark and dusty mangonyasting weed.The hit from such a young plant is shockingly good too. Her age did not seem to affect this at all. Wow what a plant. #4 is on her 42nd day flowering and looks very similar to how the #3 looked prior to harvesting. They have a wedding cake strain look to them and forna week behind , she looks very close to finishing besides her size. It will be an interesting week ahead with the shogun getting busy and the harvest so close too. Be safe

Ganze 35cm hoch gewachsen schon und das obwohl es nur so ein kleiner "Topf" ist. Langsam wird es Zeit umzutopfen.

Hey everyone 😃. Day 14 since time change to 12/12. During the week they started to form their buds, which is why I will add 2 g of GHSC Powder Feeding Bio Bloom per liter of substrate over the next few days 😃👍. The next few days I will also make some free space so that the energy doesn't end up in mini buds :-). I wish you all a lot of fun with the update and a great week 🍀👌 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

420Fastbuds FBT2301 Week 8 What up grow fam. Weekly update on these two lovely ladies. Flowers are definitely getting bigger. Crazy you can almost see the growth from day to day at this stage of flower. No real signs of any issues so will keep up the same routine as it seems to work really well for them. All in all Happy Growing.

The start of the week and no problems. I'm thinking to do 1 more transplanting when she have 6nodes and after she recover from that im going for mainline for cola's. Day 26 and transplanting the Girls in to there final 35l pot. Day 27 the girls looking very healthy and already have 6nodes, so I topped the girls by the 3node and removed all grow below the 3node( step 1 mainline)

Shes big Shes beautiful Shes a beast! Shes my winner. The last plant standing of this run and she is getting flushed with ro water. I have taken late flower clones of this girl because it would be inhumane to let her die. I will reveg them if they root and dose one with silver to make a lot of beans. Beaming her with 720 watts of light her last week of life just because I can. Ps. If she dont win diary of the month then its rigged🤣🤣

Se empieza a fertilizar de a poquito 👌👨‍🌾🏻🍀