Likes
Comments
Share
@Mimi420
Follow
Hi growers! They on FD 28,and bud production is nice so far.They eating every 2-3 day 3-4 l of slution.Instaled a second fan under the net.Every two weeks I gice them 3-4 tbs of bat guano. Stay green,and happy ester to you all!
Likes
13
Share
@Rob691
Follow
Today, day 23 was the last repotting. Girls went from 11.6L to a 20L pot. Now there in the right place. In fact, just 3/4 have beene repotting because I didn't have enough Lightmix :/ My order is late, and I'm not really happy with that 😡 I planned to top the girls on wednesday or thursday. It will depends on how they will recover. Actually, it's my first time with smartpots. If smartpots have a lot of advantages, repotting is not one of them ! I made a mistake : the plants were 60% dry, and abviously, it was not a good idea ! It should be clearly moist. Nextime I think I will water the girls 1 hour before repotting. I hope it will be ok and they will recover from this tough moment.... Will see in a few days 😰😨 Anyway, I have generously watered them right after repotting with no nutrient. Juste clear water with the right Ph. As they are in some brand new light-mix medium, I thought they have enough nutrient for a at least 2 or 3 days. D-25 : Everything is ok. Girls seems to have recover very well :) Anyway, I'll wait at least one more day before topping. The last Chocolate Haze (the one that was 5 days late), doesn't have 6 nodes yet and I would prefer to top each girls at the same time. D-26 : Repotting the last one and topping everybody. Fingers crossed for the next couple of days... I also feed the girls right after the top. During the topping process, the plants were reduced from 19cm to 12cm.
Likes
9
Share
@Caertner
Follow
Easy Steckling... Klonkragen dran, den Rest besorgt der Sprudelstein bei richtigem Wasserstand.
Likes
36
Share
Welcome back 🤗 Another week has passed and I’ve started adding a small amount of Grow nutrients to the mix🌱 Cranking up the light a bit again this week trying to maintain about 400PPFD. See you next week 😎🤙🏻💚 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/
Likes
2
Share
@Hontsa
Follow
Better weather and suddenly it grows nicely...☀️💪🌱🍀
Processing
Likes
3
Share
this week was a lil challenging, had to get out of LST due to the fact that I broke a branch and that just tripped me off and I took off all my ties , apart from that i started giving her bloom products because I noticed a few hairs. I started applying tiresias mist to one of my branches so I can get pollen sacks to produce my own fem seeds, as I plan on crossing my fortune cookies autoflower with my ak48 autoflower and creating a new strain called "DRAKO" AUTOFLOWER well till next update . O.G. Bang Bang !! out.....
Likes
42
Share
### Day 22 ### Jeej, the last week of vege! She looks to respond pretty well to the LST, I see nice new growth everywhere. She is also very dence as shown in the video up above. I hope she will get a mayor stretch when starting to flower. I'm already very proud of how this little plant is turning out. 😁🌱 Also ordered some biobizz top max and bio heaven to boost flowering when it happens. ### Day 23 ### Decided to add more LST, a lot more LST (like 7 wires extra in addition to the 2 initial ones)! 😂 Was a little hard because of the density, but it worked out. I think only one budsight does not have access to direct light. I just could not get it in the right place, oh well, there looks to be enough others 😋. Hope she is not stressed too much, some of the bends are pretty hard, but she is still flexible. After reviewing the photos again I realized that I'm growing her in kind of a spiral. ### Day 24 ### Started the day by tucking the bigger leafs underneath the small ones who need more light. She looks happier now! Also watered her 0.6l with nutrients, the soil was becoming pretty dry and it was 3 days ago since her last watering. ### Day 25 ### Pretty uneventful day. She is still liking the LST, like a lot! Readjusted the LST and tucked the bigger leaves under. There is only one part of new growth I'm concerned about! It is in the middle of the top view picture, so it is from a few nodes before, but looks terrible in comparison to the rest of the plant. Like it was eaten by something. Hopefully she will rebound from this. ### Day 26 ### I put some cardboard in a V shape in front of the intake fan to defuse the airflow more. Now the new growth that had problems yesterday looks a little better, the brown red-ish is fading away. Windburn is a real thing apparently 😲 Did a lot of LST again today, trying to stay ahead of the growth. ### Day 28 ### The last day of week 4. Did some more heavy LST to make sure all potential budsights get enough light. The growth that was struggling a few days ago is doing a lot better and seems to be recovering.
Likes
7
Share
Alrighty Then 👈 Well my friends , week 4 was pretty good 👍 did some lst training to spread the girls out .... I think we are gonna flip them .... Happy Growing
Likes
62
Share
@Reyden
Follow
🔸Davvero una grande notizia! Una nuova collaborazione con @Spiderfarmer è iniziata e sono felice di poter creare dei contenuti per una azienda seria come la loro!!! Questa mattina è stata montata questa bellissima #SF2000 nella tenda da coltivazione più grande dove dovrà lavorare per far fiorire tutte le signorine che passeranno di qui prossimamente 😁😎🔥 Voglio fare i complimenti perché siete riusciti a creare veramente una luce bellissima con materiali super leggeri ed esteticamente geniali ❤️‍🔥oltre che consumare veramente poco (2.7 Umol/J)per il raggio di copertura ( 4x3 in crescita )(4x2 in fioritura ) e intensità uniforme in PPFD Mi piace molto anche il fatto che monta anche diodi IR utili per accelerare la fase di fioritura e aumentare la resa 💡 Ci saranno diversi aggiornamenti rimanete connessi e grazie ancora per essere passati a trovarmi 😃 https://www.instagram.com/reel/Cl_EEAbu_vQ/?igshid=YmMyMTA2M2Y= Funzionalità principali 2022 NUOVA VERSIONE COSTI DI ESERCIZIO INFERIORI E RENDIMENTI DI QUALITÀ SUPERIORE: Le luci progressive a LED SPIDER FARMER SF2000 utilizzano la più recente tecnologia LED ad alto rendimento oggi: diodi Samsung LM301B, alta efficienza energetica con 2,7 umol/J, creano la migliore penetrazione della luce del baldacchino. Copertura vegetale 3 x 4 piedi, fiore 2 x 4 piedi. Potenza estremamente elevata ma consuma solo 200 W di elettricità, rendendola più efficiente delle tradizionali lampade HID e di altre lampade per piante sul mercato. NUOVO DISPOSIZIONE DEI DIODI E DESIGN DIMMERANTE: Luci crescenti SF2000 aggiornate. Più perline leggere ai bordi, meno al centro. Aiuta a ottenere una PPFD più uniforme. e la manopola di regolazione della luminosità regola liberamente l'intensità della luce. Connessione multi-luce con regolazione unificata particolarmente vantaggiosa per un'ampia area di coltivazione indoor e piantagione commerciale. IDEALE PER TUTTE LE FASI DI CRESCITA: Eccellente spettro completo: bianco, blu, rosso e IR (3000K, 5000K, 660nm e IR 760nm). Diodi 3000K che forniscono più luce rossastra e 5000K che forniscono più luce bluastra. La luce rossa e IR da 660 nm è particolarmente utile durante la fioritura, dove accelera i tempi di fioritura e aumenta i raccolti. Trasforma i tuoi semi nella tua scorta. E la luce sembra abbastanza naturale, quindi è utile per monitorare accuratamente la salute delle piante. COSTRUZIONE BEN FATTA E SOLIDA: nessuna ventola senza rumore. Il driver ad alta efficienza, affidabile e staccabile ha un'ottima dissipazione del calore. Il dissipatore di calore in alluminio è spesso e robusto, coperture protettive per i cavi; Imballaggio intuitivo. Componenti di qualità significano che la luce dura più a lungo, SF Light si prende cura di te con un design più attento, puoi facilmente risparmiare denaro senza acquistare frequentemente luci. In qualità di produttore professionale di luci di coltivazione a LED da oltre 10 anni. Spider Farmer ha sempre insistito per creare attrezzature per la semina domestica più efficienti, adatte e di alta qualità per la crescita delle piante e si impegna a diventare un partner fidato per ogni coltivatore! Riceverai una lampada da coltivazione Spider Farmer SF2000, un manuale di istruzioni, un paio di ganci d'argento, un paio di ganci neri.
Likes
10
Share
Finally done with this sweet cake, many many sticky strawberries. I love it
Likes
57
Share
@Wastent91
Follow
Eccoci qua, sono passate le due ultime settimane e domani provvederò a fare il diario della raccolta se no sono in ritardo, allora cosa posso dire, più che soddisfatto xke nella crescita complessiva le cime sono diventate delle pannocchie enormi, sono abbastanza dense e hanno un bel po' di resina, purtroppo le alte temperature hanno mandato la pianta in fox tail, infatti continua a buttare nuovi fiori e a diventare sempre più grande! L odore è un misto di pino e terra, si sente dall odore che è una genetica indica nel vero senso della parola! I nutrienti di Plagron hanno fatto la differenza sopratutto Green Sensation ha dato una botta sia come stimolatore a produrre più fiori e cresvita nel complessivo e ancora adesso continua a spingere! Ma sono costretto a tagliarla anche xke sono in ritardo con la storia del concorso! Di sicuro nn spero di vincere anche se cmq delle cime così grandi nn ho visto altri diari, magari sono più belle esteticamente le altre, ma così grandi nn ne ho viste! Grazie a tutti voi che mi avete seguito siete stati dei grandi vi voglio bene a tutti su questo grandioso social! Un abbraccio forte e un buon 420 a tutti tutti voi! 🙏💪😸🌿🌲❄️? 🌽 😽💨❤️
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/1- Here we go into the fourth week for the FastBuds Strawberry Gorilla Auto's and they are all looking great, and are very healthy! I'm continuing the feed schedule of six, 15 minute feeds daily and am leaving the nutrient level at 900ppm. The HLG 650R is now at 100% output, and is hung 28" from the canopy. I'm keeping a close eye on all of them, looking for the first signs of flower. I also am diligently tucking shade leaves away daily trying to get some light down into the plants. 11/3- Yesterday I decided to do a little bit of defoliation, removing the largest shade leaves on all three which really helped with light penetration. Today all of the plants looked none worse for the wear, and as spunky as ever! 11/5- All three plants are now in flower, I have done LST on all three, tying down branches with horticulture wire. I've also done some defoliation on each plant as they got extremely bushy and were getting zero light down into the lower sections of them. All have responded extremely well to the training and are looking great! Tomorrow I will empty and clean the reservoir along with the 'brain bucket' as the water has really gotten funky and has an odor that I don't like. Going forward, I'm going to be doing weekly changes on the reservoir where I'll empty/clean/refill and add fresh nutrients. In between changes I'll just be topping off the reservoir with straight water and only checking the PH. 11/7- There goes the first week of flower for the FastBuds Strawberry Gorilla's and they're all looking pretty darn good, all things considered. I can't wait for next week to see these girls really start to get going! Thanks for stopping by!😎❤️ 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
82
Share
Harvest day, you’d think I’d be excited and I was until last night. I’ve had to have my oldest Cat put down due to health reason 😿 I almost can’t be bothered to do this update, but here I am 🤦‍♂️🤷‍♂️ it’s only one more entry. I harvested this plant at day 58 of flower, it feels like she matured and finished quite fast, always a good trait. Her buds are rock solid to the touch and almost wet with trichomes, if that makes sense?! I took some pictures just prior to harvesting her. She’s now hanging on a peg hanger in my drying tent, cut into individual branches. She took barely any time all all to trim, she’s got a high bud to leaf ratio and everything I cut off will be dried, frozen and sifted to make Rosin. No waste at all. I aim to dry between 10-14 days, I generally keep the RH around 55% and the temp fluctuates around 18*C. She’s been an easy plant to grow and I’d recommend these genetics, In House have really outdone themselves with this one! I don’t usually do this, but I’m dedicating this grow to my late Cat Poochim. (I’ve added some pictures of him) I got him when he was a little kitten and I was just a teenager, 20 years later and I’ve had to say goodbye to a very old friend 🖤
Likes
16
Share
Week 19 and it happens to be a rainy week with on and off cloud coverage which was actually beneficial to my plant but the humidity has been up due to the fact I also use a swamp cooler and if it's gonna be this humid for another couple days then I'm worried about mold developing on the buds so i think I'll break out the AC to get rid of some of that moisture in the air and maybe alternate between the two. The AC hasn't been used once the whole grow cycle so far but living in AZ we get random storms from the monsoon season not to mention tons of dust, high winds, flash flooding which could be used to flush my plant because it needs it now if rain builds up around and gets under the green house, j/k lol. I've been thinking about buying lady bugs to get rid of all the white flies, any experience anybody, would that work? After writing the above, I could hear the wind picking up outside and remembered that a storm was coming so I ran outside to prepare and it punched it's way through Phoenix with extremely high velocity hurricane type wind, gusting up to whatever it takes to bring large trees down or make a wooden shed door fly off with a wall of dust to the sky and then finally finishing with heavy rain. I was outside the entire storm from beginning to end, well at least until the wind died down and it was just light showers by then. Even with having my greenhouse tied down I had to hold onto it for dear life or it would have taken off like in the wizard of OZ. Honest to god I was almost pulled off the ground or several times more onto my greenhouse when the tsunami type wind would hit, pounding me and the greenhouse from behind having to pull down while leaning back with all my weight and strength.The whole time I'm screaming for my brother who was inside to come out and hold the greenhouse so I could tie it down better because it was just coming apart trying trying to fly away or be ripped apart as storm hit us I was holding on for Amy's Green Drop's dear life. It was pretty insane and wish I had video of me doing it but just have a video a friend sent of his backyard getting hit so you can imagine that wind hitting my greenhouse. The after math was bad 😭 the wall of the greenhouse was getting hit so hard by the wind making it press inward towards plant it snapped off in the middle one of the lower branches making the two buds on the end half hanging there from a 90 degree angle from branch so I knew there was no way to support it back in place enough to heal itself so I clipped it off and started drying it. One other next to it got bent up pretty bad so I'm trying to LST it back to place. The storm also killed my swamp cooler somehow, I guess it's because it has a lot of electronic components on top that was soaked from the wind the rain came from the side, I know, you'd think a swamp cooler could get wet. Now I'm stuck using only my A/C and a humidifier to control moisture and temp and I'm worried it's gonna be pretty hard only using AC in such a small greenhouse as it takes time to find the right ratio of intake and outtake air but can only open greenhouse to mix in so much hot dry air, so starting it was getting down into the high 60's, and I have to figure something out because I can't let it get that cold in there for the last few weeks. I'm almost ready to call it quits If I can't find an equilibrium with AC and humidifier, and if there are anymore storms on the way. Next time I'm getting a bigger sturdier greenhouse that goes into the ground and has hard clear walls and roof, other than the recent storm and excessive sunlight finding the right shading it's been very beneficial doing the indoor/outdoor combo grow and would recommend it as you can live in any weathered extreme hot/cold climate and still grow outside,
Likes
7
Share
@Krissci
Follow
Bud's everywhere... Nearly ready to begin flush.... 1-2 More feeds of nutrients then begin flush. Day 6 - defoliation on the lower leaves and slot of bending to expose the lower Bud's.. I HATE SMALL NUGS !!!!!! Pointles....so bend or lollipop
Likes
17
Share
@Broedt
Follow
Day 78 of flowering Stopped adding nutritions to the water after day 71. The plants started to get a bit shady after that, by shady I mean that they been hanging and slowly turning yellow, and getting some spots on the leaves. I almost had an heart attack when i saw that one plant had during 30ish hours turned brown and dried all out - See the pictures. I couldn't see any mold or any thing, so i chopped the top of the plant off. None of the others had anything like this.. The buds are getting so fat that the plants are starting to have a hard time holding the weight pf the buds. Im planing on harvesting during the next week.
Likes
13
Share
Friday the 19th of May Day 23 of 12/12 recently started with the new nutrients mills part A and mills part B ppm 870 all in full flower now still not impressed with the front left plant but what can you do il be happy with a small yield from that one hopefully the quality is as good as my last grow 🍁😎 also need to upgrade my light been using cheap lights for awhile now and the grow is better each time so I’d like to see what I can do with a well known light from a good company
Likes
8
Share
@Growbody
Follow
Herzlich Willkommen zu meinem Growbericht der Membrana Hyper Autofem von VIP Seeds. Die URL für den Strain findet Ihr hier: https://www.vip-seeds.com/membrana Für den Grow verwende ich den großen 15 Liter WideVersion Stofftopf von ROOTIES. Bei meinem ersten Grow mit den ROOTIES kam nur die 9 Liter Version zum Einsatz, da haben die sich gut bewährt. Auch die Smart Start Plugs von Zamnesia werden wieder verwendet, dieses Mal ohne den Samen vorher einzuweichen. Und die Erde und der Dünger von BioBizz findet wieder Verwendung. Tag 97: Die Membrane Hyper Autofem von VIP-Seeds bleibt filigran und streckt sich weiter. Schön, dass du dir mein Tagebuch angesehen hast. Schöne Weihnachten 🎄✋😎
Likes
12
Share
Buds von Pheno #1 (Tribute•D•Cut) mein absoluter Favorit wenns um die reinen Blüten geht haptik terps appeal 1a ! Folgen in kürze,in ein paar Tagen wenn sie ca 20 Tage curen konnte,werde ich ein paar meiner Favorit Buds von dem cut hochladen!