Needed to go in big pots will sort that tmro watered late today they will be fine again once in bigger pot these have been on 12/12 for a few days. Will pl out the gavita they need some hear for a week or 2 led lights not powerful enough now for the plant age it's not growing much now fed today water tmro with transplant

Auto Opiym is in flower and with some cooler night temperatures in upper 50s low 60s the buds and leafs are changing colors🤩 The feeder leaves are yellowing and the sugar leaves are changing to purple 💜 . I top dressed with 2 tbsp bloom soil as fertilizer. Her limbs are spindly ans can't support the weight of her buds. I added a hoop to support branches but many just bent over the wire. I don't see many amber trichomes so I wait.

Какое же красивое растение!!! Аромат яблока 🍏 и сладостей, есть нотки дизеля.

Finally the stretched stopped. Cut about 10 tops bent about 20 with 90s. Still right in the lights. They are looking very happy even though they are so close to the light ( thanks to high c02 levels most likely.) Another week or 2 before I cut the temps and co2 levels down. Been trimming all leaves below light line. Stinky and brutally sticky I feel like Clark griswold with pine sap when ever I am bending the tops and such.. I think even with them being in the lights I will still get a few pounds of premium flower to smoke :)

Early flowering happened earlier than I expected. Is that because of some sort of stress or something? I think, they aren’t mature enough.

Tent from Mars Hydro Factory (3,3'x3,3') 🏕️ Powered by Mars Hydro LED FC 3000 🐙🚀 Www.Mars-Hydro.com Super Lemon Haze CBD from clone 🍋 Genetics from Green House Seeds 🌿 Seed from seedbank.ge Flowering week 3 ✅ Strain Hunters/solo cup grow project 🌴 Nutrients: Green House Feeding Hybrids powder 🎊 CalMag+, Hydroguard and Silica Blast from Botanicare 💦

Wow look at that bush!!! I've not seen that much bush since Debbie Does Dallas! 😂 😍 She's grown another 18cm this week vertically too. Hope she enters flowering soon 😬 😎

It's seems that they weren't happy in the small pots, I decided to transplant and see if the recovered. A new seedling appeared. Raised power of Mars Hydro TS 1000 from 50% to 100% I'm not sure if the leaves are yellow because of lack of nutrients or excess, I'm experimenting with Bio Bizz All Mix. I decided to lay back on nutrients for the moment.

Que pasa familia, vamos con la primera semana de crecimiento de estas Gorilla Zkittlez Auto de FastBuds. Tiene muy buenas reseñas y pues me animé a colocar 5 plantas. Las 5 semillas una vez germinadas son plantadas directamente en macetas de 7 litros y salieron las 5, 100% de éxito en el ratio. La tierra que utilizamos que está en la publicación anterior es top croo al mix, aparte alimentamos nuestras plantas con Agrobeta. Por supuesto el ph se mide en cada riego y se mantiene en 6.2, regando cada 48 horas e intentando mantener la humedad un poco alta al principio. Las próximas semanas vamos viendo cómo avanzan. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Gettin bigger steam size are around backwood size 😎

Ya ya baby these things are monsters!! Bent a few over they were asking for it LOL

Coming throw - we put a few in a 20liter - going for a few tiers. Tent has opened up some space from harvesting this week so should see the remainders beef up some more. Weird that I have flies in this tent. Harmless but I think the sweet aroma maybe have something g to do with it - or coffee grinds -

Started some LST and removed a few leafs to get some light to the under branches. Trying to get those to grow up some for more tops in the end hopefully. Feed most of the plants some Liquid Seaweed this week with Molasses, plants seem to be enjoying it. Other then that, nothing to report really.

Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).

Giorno 35 A parte qualche insetto qua e là le piante stanno bene. La zombie Kush #1 è il triplo della #2 e quindi ho iniziato a tenerla bassa già da ora. La Rainbow Belts #1 sfregando le foglie si sente già odore di caramelle Zkittlez A settimana prossima e grazie della visita e dei like 😊

🗓️ 8° WEEK FLO // DAY 50-56 (from switch) // DAY 127-133 (from dry seed) ⚡- Light: 30 cm / 250 watt; ⌛- Schedule: 12/12; 🌡️- 22.5° C - 65% RH average; 📑- PH 6.2 - EC 2; 💧- 8° DWC change; 🍔- Ripening blend: tap water EC 0.4 + CalMag 1 ml/l + Ripen 5 ml/l + Power Buds 1 ml/l; 🌱- Both are producing a lot of resin on their buds, the phenotype #2 is very sticky; 🌸- Trichomes are turning milky, some amber here and there. Harvest in 7 days; 🔜- We are almost at the end and I am already organizing my next two diaries, I really like this initial phase of organization and planning for the next four or five months. The "modus operandi" will be the same adopted in this cultivation, I will start with two very fast autoflowering plants and in the meantime I will give the two photoperiodic plants a long vegetative growth. I still have to decide on the strains, but I already have an idea. As far as the nutritional regime is concerned, there will be big changes, for the first time I will be using beneficial bacteria in my DWCs and anyone who has any advice on using them in this setup feel free to write to me and share some thoughts. 🆕- On week 15 I got the TrolMaster TCS-1 by @TrolMaster_Europe and I started to track my grow box data. I will add these info once I harvest!

This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.