This thing is a monster for how young it is i can belive how it turned very happy with this company's first grow easy resistant smells good good tricome production with little to no feed just kept it simple no topping she's currently hanging in the grow room now 😊 gonna be a harvest week and thats it for this girl happy growing

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls still beautiful, the end is arrived 🏁🏁, Keep flushing Neighbors said stop to the party, Trichromes should be ready, smeel is so so strong 😱😱😱😱 💧 Give water each 2/3 day 2 l Water + Flash Cleaner (3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 28 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

A solid 13cm vertical growth this week but look at how much she has bushed out! I think she's going to make a very nice adult plant.

Regando solo con agua ya 2 semanas, sin necesidad de lavado el cultivo probiotico me lo permite las flores ya están maduran y se nota una densidad enorme en las special queen y en las green gelato de royal queen seeds

Mar 7 (day 78): Start of week 12. Mar 11 (day 82): Chopped plant.

SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

- I didn't weight wet buds. - The trichomes photos have been taken just before the harvest on buds all over the plants. - The hash balls were : a little less than 1cm diameter for the Mandarin Punch#1 and around 3mm diameter for the Mandarin Punch#2 - Drying was made at 20°C and around 50% of humidity. - Humidity in jar around 50% on the first day, temperature around 20°C. MANDARIN PUNCH #1 Veg time : 44 days. Flowering time : 70 days. Total time from seed to harvest : 114 days. Height : 142cm Pot size : 26l Harvest : 61g MANDARIN PUNCH #2 Veg time : 45 days. Flowering time : 67 days. Total time from seed to harvest : 112 days. Height : 123cm Pot size : 10l Harvest : 41g

She is growing safety and healthy...

Good week, all in flower and getting bigger. The zombie is fully back to life and catching up. Defoliated the four plants and used RQS Bigger/Sweeter/Thicker.

Definitely would’ve been better had I not moved but nonetheless it was a great run overall, super frosty and sticky with not very dense buds which made for a difficult trim but I didn’t mind.

Tag 78 bin grad am spülen und Ernte ist Tag 80

Buds are not as big as I'd hoped going into the 6th week of flowering. Not sure if it's got anything to do with it, but it's been quite warm this week. It's cooling down next few days so hopefully can get the temp back down below 30c with the lights on. A couple more of the lower leaves have yellowed and dropped off, and now there's a clear canopy area between the leaves at the base of the colas and medium, which should help with airflow. There's been no noticeable vertical growth beyond colas getting taller so I've dialed the biogrow back a bit more, and will probably stop using it all together from next week onwards.

Day 1 — Monday 9/15/25. Installed a timer on a 12/12 cycle finally taking this girl out of 24 hours light schedule . Because it’s day1 of flower I also gave her a full strength feed of flower nutrients which includes my new organic foop, stash, & incredible bulk . That’s 95ml per gallon of water plus 1/2 tsp of stash and 1/4 tsp of incredible bulk . She looks hungry hopefully this doesn’t overdo her . I’m thinking she still needs some “grow” nutes for these first 2 weeks atleast but I’m going to see how she responds to this strictly flower feed to make sure I haven’t overdone it . I’ve moved the clones out the tent & cleaned out the crud in the humidifier since I stopped using purified water it gets build up . That branch I tried taking back together has died ! Can’t save em all I only hate it bc it’s from the ONLY branch that regrew from that one half of my plant it’s near dead state . This 5x5 plant is only 1/2 of a plant trained to cover my tent’s entirety meaning if I had the other half I’d have a 5x10 plant . I’m I dunno how long this girls is supposed to flower for . . 8 weeks ? 10 weeks ? 12 weeks ? I’ll need to find that out to adjust my feeding and light intensity accordingly . It’s been FUN but now it’s time to get to the FUNNEST part ! The Bud! Day2 flower 9/16/25 completed our HEAVY DEFOLIATION. Got about 93% of it out of there I’d say there’s about 7% more I want to get out of there . These next 3 weeks are the last times I’ll be able to pull leaves before these too many trichomes to not glue your fingers/tools together . Shes look crazy as she always does when I strip her back but her bones are great . I broke another branch today while defoliating and trying to better spread out the canopy for coverage . I’m undecided will I scrap the clone projects as I do not feel like slapping together another make shift setup for lighting purposes and I don’t want to let them get leggy between nodes before I decide what I want to do with them . I may hate this bud and not want to grow out the clones . I may love the bud and be thanking myself I made these clones . I dunno viewers choice ! What do we do with the clones during flower??? Comment below Lights out begins at 6:50pm she stays dark for 12 hours . Humidifiers refilled shes coasting into sweet dreams . Looking online quickly it says she flowers 8-10 weeks so that doesn’t really help me gauge when to stop feeding & when to start flushing so I’ll keep looking for more definite answers . Happy Growing ! Give us a like

TUESDAY 1/15: MuthaPHucking PH fluctuations again!!!!! 😖 I calibrate my 2 cheapo- ph pens everymotherPHucking day and STILL it happens....PHuck the dumb shit....I just ordered a $100+ Apera tester.👈 I watered everybody with about a half-gallon of water, plus heavy boomerang and calimagic, some bud candy, some terpinator, some kelp me kelp you, some armor silica, and the bloomers got their first dose of open sesame..no big bloom or grow big for anyone. WEDNESDAY: I foliar fed them a few times and calibrated my new ph tester. The big C4 is branching like crazy...the little one is flowering now..hopefully she stretches really well too. All 3 WW's have started flowering. I FIM'd the last 2 WW's today, so everybody's done. Debbie Diesel is looking strong..big thick main stalk. The Northern Lights is also showing me some vertical growth now. All 3 Candy Canes are budding up nicely.👍 FRIDAY: I fed everybody about a half-gallon and foliar fed them a couple of times. SATURDAY: Foliar fed a few times The Candy Canes have stretched so much that I may need to raise my lights a little..they are about 16 inches from the tops now....monitoring... SUNDAY: Foliar fed a few times Still no sign of light burn on the CC's, so I'm leaving the lights where they are. MONDAY: Still moist..will water tomorrow with my new pump-driven system👍

I was in a hurry to harvest because of the aphids. All buds was washed and finally the affected buds were throw away. The smoke is smooth and nice. im happy of the 82gr

Semana 1 abril - 7 abril 3 abril - feeding day 1.1 L 6 abril feeding day (1.2L) Calmag 0.5; bio bloom 2.5ml; topmax 1.5ml; bio heaven 2.5ml; acti-vera 2ml; biogrow 1ml pH 6.5

Another week of flowering is over for the Strawberry Gorilla RF3, and she continues to look beautiful. The flowers are developing nicely now, and the plant is looking very healthy overall. She still seems to be loving the conditions in the small tent and is taking the nutrients really well. The development is getting more interesting every week, and I'm really enjoying watching her flowers slowly take shape. So far, she's looking very promising, and I'm really excited to see how she develops over the next few weeks.