Tutto perfetto 👌 a settimana prossima. Buon anno a chi legge 😉

D113.She was fed 300ml of water 30mins before harvest to prolong drying period. So, after her 15hrs rest, I took half of her, probably around 60% 410.5g wet after I took all the fan leafs, most sugar leafs. Left on the stuff with the most trichs, looks a little leafy but lots of that growth half way down and going into the bud is covered on long trichs. As I'll be keeping that trim, so better to let it dry on the plant. Had some trouble getting it into the boxes. I punched loads of holes and was going to put the box on its side so it could hang dry. But it was just wayyy too much hassle. I'll rotate the buds every 12hrs. Rooms RH is 40% room temp 21.5c. Tents RH has dropped down 2 44% 45% when I walk into the room, sensor is so sensitive, gives perfect RH/TEMP every time. Only a 5% difference in the room compared to the tent. Was 10-15 in it's highest before I got this great dehuimifier. As for the bud, was really really sticky. I literally have dirt/ash stuck in the groves/fingerprints. I've washed my hands 4 times. Now I'm left to rub my fingers together to roll out the stickiness. Crazy high resin filled bud. Man I'm so happy I decided to give her a dark rest period before chopping half. Have open up the whole lower half. I took some bud that you could still see prob would have gotten bigger. But as the plant has stopped feeding, I had to take what I could and leave enough young bud to kick her back into feeding. Fingers crossed. Theres at least 3-400g wet left on her. 410 so far. I'd say 50-80g of that is stem. Let's see what happens lowered her ppm to 1100ppm. 6.25 PH. Tried keeping in the same as the flush water which is 6.3. Update. Decided to hang dry 60% of the bud. Just strung a few line across the box and hung what I could. Sticky isn't the word for what she's putting out at the moment. Full of sugar balls. Didn't want the bud going all felt. After final trim I'll put up bud shots, smoke review. Trichs were 90% cloudy last night before lights went out. Everything turned cloudy almost but the 10-15% that was taken to help produce more explosive growth. I want at least another 3-400g wet. Bit hard to see it there, but the bud is there for there to be that much again if she takes off. If she is stalled and won't eat she finish and it'll be 100g wet of larf/bud full of stigma that'll just turn amber and be weak bud. Fingers crossed she's bloom again. Throw her back on big bud coco. Cut her PPM by 500 and will do a run off test 2moro to see if that number is gone down from the 1100 feed to 5-600 it should be. If it's above 1100 it means no nute uptake and it's also gathering the nute/flawless finish that was left behindz I tried flushing as much as I could but the PPM was still 250 after 25mins of constant flushing. After learning more about autos over the months for the last 3 weeks I've been pushing up the light time. She's actually 20-4 now. I started her on a 18-6, down to a 15.30-8.30 pushed her back to 18-6 now after half harvest I'm hoping she's push back into feeding. I'll know on her next hard flush. So, good new good news. Got a bit of run-off back from the 1100ppm feed. Was 490ppm. Starting to feed again. Yup Yup. Back on big bud coco for 2 weeks. Few days off that and a wk of overdrive, maybe 10 days, depends how they are getting on and how she's feeding. Am going to bring PPM back up by 100 tomorrow and get back up to 1400ppm. But this stage, there's no nute burn so I'm going to give water feeds on every 2nd day, as opposed to feeding everyday. I'm just going to fill her up on nutes, just enough so she doesn't give much back and then the next day that same amount in water. Should keep her heating regular and not be shocked by a hard flush every week. Trying something new. Let's see if we get better results. Happy so far, if I can get 300 more wet, as she is 48cm tall. Lots of bud sites, small larfy but the potential is there for them to be dense like the top side. Let's see. Going to focus heavy on PK. Gonna pull back on the enzymes&tarantula also. No need as they have done all there gonna do in an ineart substrate the plant got it's benefit of them. It kept and very big uneven plant in a state of growth, yes, she stalled, but that was explained why, the short of it is, (as the plant draws food from the top of the node, it that top is done and is only wanting water she's onot going to draw up water. And leave nutes behind. It's why the top slowed down, stopped feeding 2weeks ago and stalled the lower ends) 8/4/22 Pushed up her PPM by 200 last night by way of increasing B-52, mainly PK. Gave her 1.5l of water 12hrs later, and I got about 300ml of run-off that cane in at 480 from 1300ppm. Really well, delighted she has pushed back into feeding as she has been just drinking water. Even the flawless finish she wouldn't take any of that. She was just drinking water. So, thinking of it now and the 80-100g fry I'm gonna get back, more around the 80mark after I remove the bud from the nodes/stems, (Once it's dry, not before) I should be left in the 80range. I decided to fast track some bud, as at the moment I'm smoking dust from my box, so 6.5 stem that weighted earlier was thrown into the eletric dryer. When she hits into 4.5-5g she'll be ready to smoke. Shes frosty as f..k, already lost around 2/3s of it's wet weight, which is too fast, it dawned on me, I've the weed in the room with the dehuimifier, (fuck), not good. Weed should dry naturally, no wind/air flow from fans should be used. Yes, there needs to be air flow, but it should be o'natural. Air dried weed loses terps, resin, thc and drying to quick will give your bud a planty/earthy smell that's not meant to be coming through, yes, a cure will bring back her taste but just let her dry out natural. Trust me, I know what I'm talking about. I've compared quick dried bud to natural dried bud and the difference is like night&day. Also, air dried bud will go flat and if you are using a drying net/rack make sure to rotate your buds every 12hrs or so, this will stop them from falling in on each other. Esp if you aren't dealing with dense bud. With this though, that's not the case. The bud density is a lot better than the organic that went through a 70%RH for most of her flowering period. This bud is like 3 times stronger. Sativa buzz lasts about 15mins and then a good luck in the face from indica. But is covered in dense hard nugs, the bud for the most part is like this. The rest for density I'd give it about a 7.5/10. Yield 9/10 Quality 9/10 THC level reached 80-90% of the 22% given on paper. She's defo into or very near 20% THC. I'm even thinking of sending some to get it tested for kicks. But as not a 1grain of my bud will be sold, EVER. It'll only be for my personal use, but as she's already put out 410 wet and maybe another 200+ I'm looking at maybe 150g dry. And yes, I will be posting proof of dry weight. 9/4/22 92.5 G DRY of dehuimified bud. Yup, I used a dehuimifier. 1stly it was partly by mistake. Yday, before going out for 12hrs after chopping my bud I closed my door, it was only last night when I was emptying the dehuimifier it was so full of water, I didn't make sense, then I looked up and seen my bud, quickly felt it, weighted it and was topping out at 215. So, I decided to keep going, closed the door and it's been running since yday until dismorning and then 12 hours I let it rest. 100% pure sticky, I actually couldn't believe it. It was like it was 100% long dried. That was the plan. But the difference alone in the 4.5g of bud that was dried in the electric dryer, was a bit sticky, but this is GREAT. It's like it was 100% long dried. I know I don't have a lot of drying experience but I love this method. I'm going to dry the rest of her hang drying in the tent with TDA. And then I'll truly know, but alone the rest of the zkittlez plant has now optimal RH it'll be hard to tell as the bud will be even stronger than what I've already gotten. Which is very very close to 20% THC. Has to be 18%, has to be. It's so strong. 25%Sativa75%Indica. Nice uplifting feeling then a strong head stone comes on. The terps are there and all, but you can get a hint of earthyness, idk if this is normal with zkittlez? But it stinks of a weird, well that smell that only zkittlez has, it's hard to explain if u haven't grown it. I've decided it's not to harsh so gonna cure the guts of it, well it'll cure as I'm smoking it, probably last about a month, if that. I'll go into more detail about the smell effects after 2wks cure should be half left by then. 2.5gs a day keeps boredom away. So first big harvest with damm good bud, I know I'm biast, but it is tops, trust me, I'd be pissed if it wasn't. Chuffed.com. hopefully another 50g dry to come. 92.5 isn't bad for a starter, oh and I took .5 or some shit last wk right, so 93 total. Yup Yup giddy up. DELIGHTED. Can truly say, these grows haven't been without their issues, but now having the gear I do, top dehuimifier, new nute sponsor, moving into DWC fun grows ahead, with what I've learnt, the signs of the plants when to give what, extra/less when to introduce bloom and not go by a fucking chart that says give bloom after 4 wks on a plant that doesn't bloom until wk 7. After I dry the rest of this plant depending on how THE quality is ill be dehuimfying it. And top tip, be sure to fully trim as the amount of dried sugar leafs that have crowed into the bud is a bit much, smokeable and all but ill be pulling out or not depending on how stoned I get. Lesson learnt do a full trim, I was planning to do the whole box but when I seen how much water was taken out it was already too late. And i spent a good 2 hours just taking the bud off all the stems and removed 95% of unsmokeable trim. Also stuff like that with really hard to control RH, even still on this run with all the growing the plant has left and with having a top dehuimifier I know I can even get a better end product. Really excited to see what I can do. Fun times ahead guys!! Watch this space!!! 9/4/22 Plant update. She's doing well, responding well to the extra light, no droopy leafs, no light stress, just like I thought there'd be none. Hasn't stalled, if anything it helped push her back into feeding and is keeping RH below 45 for the most part. Have called it quits on the dehuimifier, has totally cleared my house of dampness whole house has been at 45-48 since she was last turned on 10hrs ago. If RH gets into the 50's I'll put it back on but for now, they are fine, more than, they've lived most there lives in 60+ so. I'm sure they'll finish fine on 50+ 55 max. Upped the PPM. She has slowed down on her amount of feed 1.2l every 24hra she can hold. She got 1.2 L of what you see above, 2moro she'll get 1.2 of 1500 again I'll Just be getting there differently. More PK. So .1ml of coco B bloom and .5 extra of .5 B-52 I'll lower coco bloom part A .5 and something else like bud factor should even it out. And keep her in the 1500 range. Then in 2 days 1.25l of water hopefully get few 100ml and she goes she's feeding. Good bye till then. Gonna enjoy my bud for a few days. D114.5 Took a heavy feed last night on the chin, no signs of nute burn/tip burn. Buds are responding well, only a couple days, so it's hard to tell if she's gone back into making bud, but she's feeding. Can't run the run-off test till later. Seem to be taking the light increase well also. 20-4 we are going to finish them on. Yeah yeah I know, shouldn't be fucking with the light, well it hasn't done any harm I can see as of yet, so.....Yup. lots&lots of numb mistakes, massive learning from these grows. So, drying my bud fast was a mistake, thanks for the tip bro! Seen below in comments. So, will 100% be hang drying the rest of the girls. Gonna chop, full trim and then hang dry it upside down in a 50RH room. But hey, look, nothing ventured, nothing gained, or some shit like that!! Lots of lessons learnt. Your 1st grow is sadly going to be brutal for your girls, r if you wanna play it safe and pull 30-40g go for it, I want big monster buds, quality, fuck quantity. Give me 1 g of Quality of 10g of quantity bud anyday. This is quality/quantity. I done pure quality, organic bud, was beautiful and all, lovely tasty tasty smoke, very smooth were as this is a little more harsh, just a tad. You can't get 100% rid when you are using so many non organic nutes. Heavy metals galore. BAD NEWS UPDATE: Well, it looks like as though I left it too long before taking the colas that has stopped feeding. After harvest I checked her last night and 70% of what was stigma has turned amber. So, she's gonna finish off as she is larfy and airy. Will still be good bud, just not 50g more like 20-30max. Am going to focus on bud factor x/bud candy for the next 2 weeks. Gonna pull back on overall NPK and push sugars. And maybe I'll finish her off on the 2nd wk with overdrive. Will cut big bud coco after this week, as to make sure I don't get rust spots again by mixing overdrive/big bud coco. Changed the PPM down from 1500 to 900 and will give 1.3 weeks on overdrive and then flawless finish for a week ppm will be around 250ppm. D119 Tool 3 top parts of the bud that was 100% done. Will be harsh but the bud underneath is so far behind and is in stall mode as these tops were only drawing up water. So to help the lower growth I took these 17.9 G wet off to get more bud. Total 428g wet 98.2 G Dry took 4 days to dry the 17.9 I got 4.2 or something back. Still a little wet but smokes nice in the bong and joints and very strong much stronger than what I quick dried, and the taste is much much better. Still a little planty but a cure will bring out that zkittlez taste/smell, if I wasn't smoking it. Okay, so the much stronger is right. But now the stone is COMPLETELY different. She's defo a 50/50 indica Sativa now, idk if this is down to the way it was dried or what. So here's the stone. Extremely excited, but nit a excited get up and do stuff, hell no, Im way to stoned to be doing anything, im having trouble writing this even. Yes, I'm uplifted but also in the mood to do NOTHING. Sit back and get baked. It's defo in the middle. Still not a day time smoke though, she's just too poeerful. Really really nice stuff here. Delighted with this new type of zkittlez as I was getting a little tired and tbh fairly use to the high. Defo be growing multiple strains next time for choice. Peace and thanks for reading! Be sure to drop a like so I can check out your grows when im back. Keep the growings a going🌱🌿🌷 gottagrowsometime

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

6/3/24 These genetics really chunk up. I may have to harvest everything early. Luckily the autos in my tent are close to being done. They could be chopped now without much issue. My whole tent system went out for about 8 hours and My humidity was 75 and my Temps were 73. I really hope everything is ok but that is a possible 6/5/24 she's still plumping up alot. She's going through water almost too fast now. Not giving anything but water and slf100 for a week or

Yoyoyoyoyo party people! It's been week 2 of Flower, the stretch hit HARD! Starting at about 30-ish cm to 43 (with a lot of LST tho) developed an almost nice and even canopy already. Scrog net is always nice, and i highly recommend everyone trying it at least once! So far i only gave Plagron basic nutes and she looks great. I Like the product, contains a lot of product for the price, pH isn't drifting all over. With my light, i need to supply extra calmag, as you can see on the purple branches. I'm ashamed to admit, i've only done 2.5 reservoir changes in 12 weeks 💀 Please do it better. At least every 2 weeks! (or watch week 10💀💀) Already starting to smell something "sus". im excited every day looking into the tent. I hope i can even out the canopy as much as possible and then full on Blast with 40 DLI as much as possible. I adjusted both fans, so i have one below the canopy and one above, hopefully this will improve the wet spots that occur sometimes caused by the high humidity, caused by the high temps) Stats for nerds: DLI 30 inceased to 34 over this week VPD 0,7-0,85 (it was really warm, so i went with a lot of humidity, temps up to 34Celsius and rH 85 kekw Feel loved, take care of yourself, peace !

Having cal mag issues going to hit the grow store tomorrow am and see can I get some organic cal mag and see if that helps other than that no real issues 2/24 I’m going sit my dumb ass down and chill I did a defoliation and man I over did it I think it’s pretty aggressive and i don’t know what I was thinking I was just clipping away 🤦🏾‍♂️…… anyway got some calmag for the color issues only going 1/2 tsp see how that goes hopefully when the new growth and more stretch happens it’ll look a lot better I’m also bottom feeding the calmag hope that works too

Привет садоводы !!! Началась новая неделя Растение чувствует себя хорошо сегодня я полил ее чистой водой из скважины поливать я стал ее чаще ,примерно 1 раз в 3 дня по 5 литров эта красавица источает сильный запах во время цветения

Going nice;))))))

Vamos familia que actualizo ya la quinta semana de floración de estas Lava Cake de Zamnesia. Tienen un verde espectacular y están bien sanas, tienen un porte bueno y las flores están formándose correctamente, van engordando y van produciendo tricomas. Este armario si que lo tengo más o menos controlado el tema temperatura los demás no pero este fetén. Esta próxima semana ya empiezo abonar con el ExplotaCogollos de Agrobeta. Os añado que esta cepa me está sorprendiendo me gusta el olor que ya desprende y pfff se empiezan a ver flores bien prietas. Temperaturas máximas en 26.5 y mínimas en 24 y una humedad estable en torno al 40/50%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨.

Flushing one plant. The other plant i might start flushing next week. Cleaned up the late flowered plant. Defoliated a few leaves.

Shinning silver haze start of week 8 really starting to stink now :) can’t wait to taste it growing really well with no problems will definitely grow this strain again :)

Buenas a todos, esta semana quite algunas hojas grandes y algunas pequeñas , ya que he notado que no han sido eliminados del todo los trips 🤦‍♂️🤦‍♂️🤦‍♂️. Con respecto al riego hice 2 riegos con fertilizantes uno con trico + y otro con flora booster.

This week we did some more garden maintenance, cleaning up the green house removing any weeds growing under the pallets. We also did some preventative maintenance , spraying Flying Skull's Nuke Em on the ladies.

Переехала в теплицу, температура днём до +28, ночью +12

It’s been a real pleasure to watch them grow☮️💨..

2/10 No feed tonight just water ph'd at 6.2 2/12 gave them a trim yesterday to open them up. Feeding tonight pots are feeling light. I will lst Blueberry muffin either tonight or tomorrow.

She is ready to be picked, will be harvesting her In the next few days

Start of week 4, day 22. The girls grew tremendously during the last week, very nice branch growth, internodes and overall plant size. No trimming this feeding, just removed 2-3 dying leaves from the lowest branches. One of the girls is clearly shorter than the others, I think I will keep her in veg after this week and flip the other two to flower.

Great week. Plants are ready to be harvested. Really nice plant . Great smell nice structure. Very frosty , really sticky very dense buds. Fast strain to grow, very enjoyable. Thanks everyone

Queste runtz stanno crescendo bene, c'è n'è una che sta venendo su strana....aspetto,e vedrò cosa uscirà