Las plantas ya se ven mejor, han crecido bastante bien, aunque la Runtz#1 parece ir peor

Smooth trim and harvest, very time-consuming. I think we spent over 8 days working on the autos. Now I can rest until early September.

At the start of week 8 all 3 girls are showing preflowers! They have started stretching a good amount. I will apply nutrients on day 5 just before I leave for vacation. I added 5ml of Flying Skull Z7 to my reservoir. On day 3 of week 8 I added another 5 gal bucket reservoir for my Blumats, which will work through a siphon to essentially raise my reservoir volume to 10 gal for my upcoming vacation. I defoliated the centers of each plant to improve light penetration and airflow. On day 4 of week 8 I took clones from each Pheno. On day 5 of week 8 I applied weekly nutrients. I also filled up and adjusted the PH of my 2- 5 gal reservoirs in preparation for vacation tomorrow (I adjusted the PH to 5.5 in hopes that it will naturally drift up over the week I'm gone to no higher than 6.5). I wont have much updates until the 15th of April 😳🙏 (I will post pics from my security camera while I'm away)

9 lovely plants 3 in week 4 I have 2 in week 3 and I also have 3 in week 2 and a seedling

Overall a great strain too grow as grows with ease and seemingly without issues even with minimal care. With care she can produce hefty buds, as kept mine small my flowers reflect but still produced great smelling powerfully buds 🌱 Cycle finished in time essentially with ease and I'd be happy too recomend this strain from fastbuds. I will update with more images and videos upon timing complete and give dry weight ect, these girls wont bring much but smell absolute treat. Atm I have tried 1 small nug but still not ready not long untill can trim up, great oils and taste just need a little cure up once finished. Tried uploading longer videos but again says error 👎 have now added few extra videos

The air stone clogging up a week and some ago stopped this plant in its tracks when rot set in. Another lesson learned to change air stone mid way in grow. Especially for photoperiods. She still has some bud on her. I switched her to water and she is ripening. She grew well under the Spider Farmer SE5000 light, in a New Level Hydro bucket. Thank you Spider Farmer, New Level Hydro, and Amsterdam Marijuana Seeds 🤜🤛💪🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Www.amsterdammarijuanaseeds.com SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash (is stackable in most cases) Www.newlevelhydro.com Www.hygrozyme.com

Week 3 going well. Topped her and doing a bit of lst as well. Week 4 fead her with 25ml off grow auto from living Soils. And did a bit of demolition as well.

Hello everyone 😎 Week 5 of flower for the Dutchie🧡 Time to flush⚓️ Mac#1 Very nice smell of citrus & cookies 🍪🍋 SFV top buds ready✂️super dense,smell citrus & earthy🤤 Glueberry one more week for the top buds✂️

Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Don't forget to check out my other current grows! 🗓️ This Week: - Day 52: the end is near - faded out super strong and could handle her how I would like. - Day 53: Trichomes check - looking super good almost all cloudy, a few amber and clear. perfect point to chop - Day 54: this one is finished, let's chop them !! ✂️✂️✂️ - now its time to dry inside the tent at about 60%rh and less than 20°C/68°F trying to get it even lower for the next 10-14 days Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Wedding CheeseCake by Fast Buds https://2fast4buds.com/seeds/wedding-cheesecake-fast-flowering --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique

Sponsored by: 🦎THE HIGH CHAMELEON🦎-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 30/9 Maybe I should start a guide on how NOT to grow marijuana .... First step: don't leave 20 plants in 40x60 centimeters of space for a whole month. Second step: Don't give nutrients randomly just to make them survive. step three: avoid giving birth to a dog at home (if your house is very small). Otherwise you find yourself with plants like this: malnourished, yellow and ready to die. Solution? Immediate racking and flowering. Time one week and it will be as good as new! Obviously all is not lost, quite the contrary. The High Chameleon's genetics prove to be extremely strong and resilient! But don't mistreat them like I did !!!! a clone was taken to preserve the plant, waiting for the final result. She looks even better than one and two. From her I take two clones and by the weekend it starts flowering. yeah! __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Check out The High Chamaleon website, their first selection criterion is the strong signature of terpenes by taking rare strains while being 100% organic and respecting nature. Safe anonymous shipping! ✅ https://bit.ly/TheHighChameleon __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Shoog from BulletProof genetics this little plant is growing fast strong happy with the girl who’s gonna be a big plan I can tell both Plants are growing pretty well s Shoog one It’s growing faster than shoog 2 put both plants are doing pretty wellShoog one is really taking off One of my favorite plants this year so far just like haw fast it grows and how strong and healthy this plants are I have high hopes for theses phenos trying to find some amazing strains to work with on my breeding projects bulletproof genetics has some amazing genetics if you get a chance go check them out on Instagram or bulletproofgenetics.com

99.nap Alul is csináltam a sátorban légmozgást mert párásak a reggelek...

So I found this elastic SCROG wasn't doing for me ... so I just took it off . Lucky I'm working with a VERY resilient strain as it was cloned from a mother whom in which was the survivor of my 75 plant loss. So this this was burnt to a crisp without water for a little over 14 DAYS . So I wouldn't try this with anything I wasnt sure could "take the heat" . With it off the buds just kinda flopped a bit but still retained alot of resilience; the beautiful things . Now I could name about 100 things I could have done better . But if you think your "the best grower ever " that's a pretty used minded way to look at it . But am I proud of myself . Yeah :) - slow down feed to leave terp at end . Dnuah Dnauh... next week THE ATTACK OF THE CANNABALIST

8/31 Week 7 and the damned tent is full .... such problems err? 25 sq ft of green, did not expect this really was hoping the extra space would allow more plants but this is full on 5 Plants doing well just trying to make em all fit Nuets remain as is Defoliation to try and get they to fit in the tent a bit easier, removed fan leaves. 9/1 Upped PK to 2ml/g the cotton balls have begun 9/2 Stretching nicely at 28" 9/4 Major defoliation cleaned bottoms middle tops get the buds in light and help them fit in the tent better. Still hitting about 1 inch-ish a day nut seem to be slowing

ºDay 65 (11Jan) - 6th video; ºDay 67 (13Jan) - 18th watering (3rd vegNute); ºDay 67 (13Jan) - 7th video; ºDay 68 (14Jan) - Took LST; ºDay 69 (15Jan) - 19th watering (1st flush); ºDay 70(16Jan) - End of week 10;

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Piante sane toppato quelle che sono arrivate al 6º internodo