So I have spider mites. I screwed up so much i think this is going 15 weeks. Lost coast to the rescue! time to finish these buggers off

Will update on dry and smoke report soon 💜🍋💚👌🙏

-

Test

Day 42-49 (Day 42) Just watered today but couldn’t go until runoff because I didn’t have enough RO. I forgot to add the probiotic too. Nonetheless, everything is starting to recover from those weird deficiencies and is looking super healthy. Plants are really bushing out now too. I had to top the zkittlez and BBB#3 again as they are just getting too big. Nothing is definitively showing sex yet but I’m seeing clues. Shouldn’t be long now. If I get 4 females or less I will use 10gal pots, 5-7 fem 5gal pots and 8-12 3gal pots. I need to stop overwatering. Even though it doesn’t look too overwatered, it is much better to water a little bit each day at lights on. This will help keep the humidity down as well as deliver optimal oxygen to the roots speeding up plant growth considerably. (Day 45) Gave an EM1 spray down today. The beneficial bacteria is said to overpopulate surfaces so powdery mildew and septoria can’t form. Something seems to be really working as I haven’t seen any yet. (Day 47) I sealed up the tent and am running both dehumidifiers and it’s keeping the RH around a safe 70% night and day which is right on track with VPD. Plants are all looking super healthy. Deficiencies have pretty much all cleared up. Cold nights I’m running 600w and warmer nights I’ll run 400w. I was asking around Instagram about white ash/good burn and a few different people assured me it has to do with mineral content of the soil. I was told the three best products for clean ash is glacial rock dust/basalt, oyster shell flour and langbeinite. I already have langbeinite so I’ll grab the other amendments today and top dress. I grabbed the amendments and also got some Destiny Organics dark matter super soil, coco and some beneficial nematodes. Top dressed each amendment except langbeinite and mulched in some coco coir. (Day 48) My shelf came in today and I think it may be to big for the 4x4 tent. Each square is 12”, not the 11.8” advertised. I could wipe down my flower room and set it up in there which would give my plants a good adjustment to the new lights before I flip. Or I could set it up in the veg tent but that seems like a huge hassle as the need to be moved and flipped soon anyway. I wish they would show sex already so I can toss out the plants I’m not keeping. For flower I am considering starting over fresh with the new Destiny soil and coco mixed with some amendments. I’m concerned that my current mix might be too hot. I could also dilute it with the Destiny/coco mix. Those little bulb mites that came in with the worm castings are a little concerning as well. Some say they are just beneficial composters aka “worm bin mites” and others are telling me they’re predatory bulb mites which destroy crops like garlic. I’m leaning towards beneficial composters but in another grow I watched them devour a seedling before it sprouted. Gotta check the current roots but the plants aren’t quite ready to be transplanted. (Day 49) Got everything in the flower tent wiped down and sprayed with alcohol then EM1 few hours later. Got the shelf set up and got all my temp controls set up and running. I put the controllers outside the tent this time and will patch any light leaks. Gave a lite compost tea at 830ppm and a velokelp foliar spray at 6ml/L. This will be the last veg feeding before I transplant into their final containers on the 31st. BCTG#2 is a confirmed male and I pulled him. No one else is showing definitively. Roots looked super healthy with very few mites but I’m not 100% convinced they’re all clean. I saw a few mites on leaves today too. Saw a bit of droop after the move but they all look happy just a few hours later. Took a few clones from some sucker branches on a few of the blackberries.

Day 38- 18/01/22 and we are now in flowering everything is looking good I’m still cutting down the plants from my last grow Afghan kush and once I’m done with that I’ll be moving everything that isn’t chemdawg into the HPS tent!!! Day 41-21/01/22 there’s only fastbuds chemdawg in this tent now I managed to free up some more space in hps tent!!!

TH 1Q2025 - Week 3 - Bolt 0 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ __ Fri Mar 21, 2025 TH 1Q25 1:B:0:1 NOTES: - Tent was 75 & 71 %RH at 0900 - Humidifier pumping and ACI Removing and dropping temperature to lung room ambient. - Ah - Watering Follies. All the PCells have heft except #X, for which we’ll provide a modicum this AM. All others are benefiting from some dry. - CHEAP PPM Meters are CHEAP and WILDLY INACCURATE. - BluLab EC Pen: [ 1.1, mS/cm] - AmazonTenDollar: [ 396, ppm] - [ 0.792, mS/cm # 396/.500 - 28% Discrepancy. Cheap Pen will BURN YOUR PLANTS - You think you’re delivering 1.0 mS/cm, and in fact you’re delivering 1.3. - Thus - we’ve been over fertigating the seedlings, by almost 1/3 - Which explains the papery and uneven coloring over the smaller plants. - [x] THROW AWAY CHEAP AMAZON EC METER ;-} Fertigating Largest Plant that’s the driest, and ‘light refresh’ to the balance displaying heft. - [x] Remedial Fertigation pre-Up Plant EC: 1.2 Up Plant, Top, and Flip Day! Manifest: - 1 Gal Airpots, Assembled - 10 Gallons of Washed and Buffered Coco Coir - PCAL1660 ( 0.5 tsp, Coco in Bottom of Container) 2 gm/ gal PCAL 1660 - 32 ppm Phosphorous - [x] Obtain 4 Gallons Distilled Water - [x] Mix 2 Gallons, Apply @ Transplant & @ Second Watering - [x] KelPak: [ 8, ml] # EC After: TBD - [x] Rooted Leaf CalMag Fuel: [ 38.8, ml - [x] Rooted Leaf LushGreen: [ 19.4, ml] - [x] PCAL1660: [ 4, g] # BASE [32 ppm P/120 ppm Ca] - [x] EC: 1.2 Transplants (Per Pot) - PCAL1660: [ 0.5, tsp] # In NEW POT, UNDER TRANSPLANTED Pot - DynoMyco (Mycorrhiza): [ 0.25, tsp] - Beauveria Bassiana: [ 0.125, g] After TWO Waterings (as above) - We switch to Pre-Flower RLA Mix w/ CalMg & Lush Green ‘Boost’ We need a little more Phos - Note Patchy Pink on some upper Petioles . . . 8:6:4:5:4:2  1 Gallon Solution - Primer A&B: [ 4.6, ml] - CalMag Fuel: [ 3.4, ml] - Silica Skin: [ 2.3, ml] - Lush Green: [ 2.9, ml] - Root Anchor: [ 2.3, ml] - Peak Bloom: [ 1.1, ml] - Photosynthesis Plus: [ 6, ml] - Quillaja 60 Powder: [ 0.25, tsp] Relabeling Final Selections: 3, 4, 7, 6, 8, 9, 11, 12 Label: 3:1, 4:2, 7:3, 6:4, 8:5, 9:6, 11:7, 12:8 __ Sat Mar 22, 2025 TH 1Q25 2:B:0:2 EC: 1.2 Feed 1 Gal, 440 ml, plant - [x] Mix 1 Gallons, Apply @ Transplant & @ Second Watering - [x] KelPak: [ 8, ml] # EC After: TBD - [x] Rooted Leaf CalMag Fuel: [ 19.4, ml - [x] Rooted Leaf LushGreen: [ 9.7, ml] - [x] PCAL1660: [ 2, g] # BASE [16 ppm P/60 ppm Ca] - [x] EC: 1.2 __ Sun Mar 23, 2025 TH 1Q25 3:B:0:3 - [x] Sort Grow Room to std tidiness This is the NER w/ PCAL 1660 w/ P/K: 2.5, Needed for Root Steering. CalMag Fuel provides more calcium and Acidifies PCAL 1660 (OR that’s the theory, anyway) Here I’ve switched from Buildagrow’s CAL50K (Chelated Calcium Line, buildagrow.com) delivers 13 ppm/ml of Calcium, whereas Rooted Leaf’s CalMag Fuel contains 19 ppm/ml of Calcium. Buildagrow Chelates w/ EDTA and (the other one). Rooted Leaf CalMag Fuel are Calcium Fulvate and Magnesium Fulvate, +  EC: 1.2 __ Mon Mar 24, 2025 TH 1Q25 4:B:0:4 - Plants are displaying root stress, a tad of ‘the Claw.’ - We’re lowering the lights, permitting centers to dry back, a bit.   __ Tue Mar 25, 2025 TH 1Q25 5:B:0:5 NOTE: Observed Roots at Bottom of 1 GAL - #1 - A single root, apparent at PERIPHERY. EC: 1.2 # Until ESTABLISHED, then resume Ramp to 1.8 We want to start introducing Micronutes - [x] TM-7: [ 1, tsp, gal] # Place in Tea Filter, Close top, Drop in 1 Gal Mixing Container.
NOTE: We’re NOT Using Cytoplus (Kelp, TM-7) - We want NO ADD’L K, just micros. UNTIL ROOTS ARE APPARENT AT BOTTOM - [x] Prep 1 Gal, Distilled @ EC: [ 1.2, mS/cm] - [x] PCAL1660: [ 2, g] - [x] TM-7: [ 1/2, g] # µNutrients, No Potassium (We want to maintain P/K 2.5; root steering) - [x] Kelpak: [ 4, ml] - [x] CalMag Fuel: [ 19, ml] - [x] Lush Green: [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] At Lights On - Apply __ Wed Mar 26, 2025 TH 1Q25 6:B:0:6 SOAK Root Riot Cubes - Mix up 1 L of Sol’n - [x] Prepare 8 Cubes: Todd’s Haze - [x] Prepare 2 Cubes: Lemon Jeffery - [x] Prepare 2 Spares: Mix Soak Solution (1 Liter) - [ ] BEFORE USE - [ ] Squeeze to Moist, NOT WET Condition - [x] PCAL1660: [ 0.5, g] # [2 g, g] application rate - [x] CalMag Fuel: [1, ml] - [x] KelPak: [ 1, ml] - [x] Photosynthesis Plus: [ 1.5, ml] Fertigation Wed - [x] With 1/2 tsp TM-7: Place in ‘tea bag’ filter; soak in .5L No EC Water. Use in fertigation Base
 UNTIL ROOTS ARE APPARENT AT BOTTOM - [x] Prep 1 Gal, Distilled @ EC: [ 1.2, mS/cm] - [x] PCAL1660: [ 2, g] - [x] TM-7: [ 1/2, g] # µNutrients, No Potassium (We want to maintain P/K 2.5; root steering) - [x] Kelpak: [ 4, ml] - [x] CalMag Fuel: [ 19, ml] - [x] Lush Green: [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] __ Thu Mar 27, 2025 TH 1Q25 7:B:0:7 We’ve Roots at the Bottom of all 1 Gals. Switching to Root Bias, RLA Fertigation: 2 Gal, EC: 1.2-3 - [x] Primer A&B: [ 9.3, ml] - [x] CalMag Fuel: [ 7, ml] - [x] Silica Skin: [ 4.6, ml] - [x] Lush Green: [ 4.6, ml] - [x] Root Anchor: [ 4.6, ml] - [x] Peak Bloom: [ 2.3, ml] - [x] Photosynthesis Plus: [ 12, ml] - [x] TM-7 (µNutrients): [ 0.5, tsp] # Teabag Style Infusion 

For this grow I've used, For the growth 1 Mars Hydro TS1000 (150 W) 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 2l plastic pot. 18 Hours On, 6 hours off light For the soil I've used plagron light mix + RQS pellets For the blooming 1 Mars Hydro TS1000 (150W) 2 fan 15w Extractor + Filter 150mm 1 HS60 box 1 timer 11l pot 12/12 Plagron batmix + RQS Pellet After harvest, I've put the stuff in a room with 1 fan 15w Thanks for all my friends! And again thanks @News_SweetSeeds , and Mars Hydro, @Coco_Pan2022 ❤️❤️❤️

Día 29 (18/11) Subo a DLI 45 CBD Auto 20:1 #1 sigue sin mostrar las preflores... ¿será una auto tardía o será una fotoperiódica? Cada planta empieza a tomar su ritmo de riego personalizado, así que allá vamos: CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml He observado que regar 1 litro de golpe provoca escorrentía (llevándose nutrientes del Super Soil), de modo que riego primero 750 ml, y a los 5-10 minutos añado 250 ml adicionales y el sustrato es capaz de absorberlo todo😁 Día 30 (19/11) CBD Auto 20:1 #1 sigue sin mostrar las preflores... Debido a que no para de crecer CBD Auto 20:1 #1, decido hacerle una buena defoliación y algo de Lollipopping. A ver como reacciona! Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 750 ml LSD-25 Auto 500 ml OG Kush Auto 500 ml Día 31 (20/11) Por fin CBD 20:1 Auto #1 muestra las preflores (femeninas)! 😍 Parece que va a ser una Late Bloomer! OG Kush Auto están empezando a estirarse, parece que va a ser un monstruo! Riego H2O RO CBD Auto 20:1 #1 750 ml Día 32 (21/11) CBD Auto 20:1 #1 se muestra imparable en su crecimiento a pesar de la defoliación y el Lollipopping de hace dos días De modo que me decido a hacerle Supercropping! Dicen que NO se debe hacer Supercropping a las Autos, pero siempre me gusta experimentar y ver que ocurre. Come on! Un día muy divertido! 😁 Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 500 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml Día 33 (22/11) CBD Auto 20:1 #1 se ha recuperado estupendamente! No deja de crecer y estirar cada una de sus ramas! OG Kush Auto está estirándose muchísimo (4 cm / día), de modo que decido hacer LST a la cola principal para buscar una nivelación de la canopia Riego H2O RO CBD Auto 20:1 #1 750 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 0 ml OG Kush Auto 0 ml Día 34 (23/11) OG Kush Auto se ha recuperado muy bien del LST! 😍 La rama principal ya está apuntando hacia arriba y creciendo! El resto de ramas de OG Kush Auto empiezan a estirarse igualando la canopia Le aplico un ligero LST para espaciar y distribuir las ramas Riego H2O RO CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 750 ml LSD-25 Auto 750 ml OG Kush Auto 750 ml Día 35 (24/11) Lollipopping & Defoliation day! 😍💥💨😁 CBD Auto 20:1 #1 Lollipopping de todos los nodos y hojas quedan por debajo del plano "virtual" que marca el supercropping CBD Auto 20:1 #2 Defoliación de algunas hojas de abanico que tapan a cogollos inferiores LSD-25 Auto Defoliación de algunas hojas de abanico que tapan a cogollos inferiores & Lollipopping de una par de nodos de las 2 ramas inferiores OG Kush Auto Eliminación de las ramas del 1er nudo (eran enanas y débiles) y defoliación de algunas hojas de abanico que tapan a cogollos inferiores. Riego H2O RO CBD Auto 20:1 #1 1000 ml CBD Auto 20:1 #2 0 ml LSD-25 Auto 0 ml OG Kush Auto 0 ml 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

Welcome to the Zamnesia Spring Cup. Hi everyone :-) I hope you are all fine 🙏🏻. This week the lady has developed really well 😍👍, which probably has something to do with the Monster Bud Mix that she has been using for a few days 😎. I will top her tomorrow for the first time. After a few more days, I will spontaneously decide whether to do LST or a few more times top :-) Depending on what time allows and how it develops 🤗. It seems to be a very nice genetics. This is how you are used to from Zamnesia 😍🙏🏻. I wish you all a good start to the week, stay healthy 🙏🏻 and let it grow 😎👍 Zamnesia Spring Cup 🏆 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

normal germination

Switched to 12/12 light schedule. 😎

#3 getting harvested soon. Deofliated sixty-some leaves from green to yellow and then went into the dark for 48h. #2 is still gonna take a few weeks, Lots of nutes to slow down yellowing of the leaves. She will probably end up quite fluffy

been a slow week i think. had a problem with my power going out for 8-9 hours sunday (rcd tripped) before i opened the tent to 98% rh and water covering the leaves but turned all my fans up and it dried quick so all is good now UPDATE: done some defoliation to get more light through, lets see how that goes

We are trying to survive the heat wave we have here at the moment. Hopefully an extra dose of silicone will aid a bit... Both plants look very well. The mainlined plant is slightly taller at 58 cm, while plant 1 measures 54 cm.

It’s the 1st week of flower I flipped the plants to 12/12 a few days ago. There is a lot going on and a lot of cool and amazing things coming in the near future. Make sure to check out my YouTube page. I bought me a DJI gimbal this week. Might be my new favorite toy. The temps are starting to break for the summer. I don’t see it being very long until winter is here and it’s time to use a heater and not an ac unit. All of the plants are healthy. The plants have all grown so well I turned down the light intensity a bit today the plants didn’t seem like they was starting to strech very much. Hopefully the lower light intensity will make them strech out just a bit

28/10/2025 17:30 11.3°C 60% RH Time changed to 1 hour back during the last weekend so it's dark outside and i cannot go there before,also it Is fucking cold outside all of a sudden after some warm days We are at the very end of october and these plants looks awesome especially Coco fresh Coco Milk seems to have put a bit of weight so i decided to let her go another 3 days because the moon will be more than a half which Is pretty good

The plant is thriving as it enters its 11th week of flowering. The buds have developed beautifully, and they’re giving off a sweet, lemony aroma that fills the grow space. It’s a scent that’s both refreshing and promising, making me excited for the final product. At this stage, everything looks great, and I’ve decided to start flushing the plant with clear water only. This should help remove any residual nutrients and ensure a smoother, cleaner smoke. I’m planning to continue flushing for the next one to two weeks before harvesting. I’m really looking forward to seeing how this plant turns out. The buds are dense and sticky, and if the smell is any indication, the end result should be amazing. Can’t wait to see how she finishes!

The sour stomper appears to like her new lighting. She gets a little fatter everyday and I have now begun a flushing cycle. Going to let this girl grow as long she wants. I want to see those hairs recede.