We have 2 weeks under our belt and now we're charging into week. So far each day I can see more new growth which is encouraging. With a few more nodes in the next day or so I'll look at topping. Cheers til next time -Dj Sunstone

Harvest Week! Finished my first legal Indoor Grow in Germany in 67 Days from Seed to Harvest

Well i figured i would try some different this week. I main lined her and topped her on day 9. Lets watch and see how she responds. I feel as though doing this early in veg will allow her more time to adjust before flower. Towards the end of the week 2, four days after the HST....we see 2 new main top braches coming in, as well as some action at the internodal cut point which is indicating a "Fimm" job rather my prior presumption of topping the plant. None the less i am excited to see her grow, and i intend on letting her grow naturally beyond this point....just to see the results.

had an issue with ph right after transplant, not sure if water was off or soil had a surge. im thinking fish tank water ph was way low. issue corrected. Removed some leaves for structure and airflow. LST and FIM. See what it looks like next week.

Сухим весом получилось более 200 грамм шишек с каждого куста. На фото шишки с одного куста, перетертые через сито для приготовления канна шоколада. Россыпь получилась на столько жирной, что я резал ножом))). Веточки что остались после перетирания шишек- закинул в бутылку с вискарем. Они там настоятся и будет напиток веселее! Ресурс очень хороший, жаль не дружит с Украиной, а ведь пора уже расширять службу доставки посевного материала и не только. Всем удачи и отличного настроения. Получилось шикарное масло и шоколадок сделал для майских праздников на природе.

Wrll Cannafam weve come to the end, After 3 days of allot of rain i noticed some fussy bits on my gal and i brought her in for an emergency harvest ☹️ I did want to run her another couple of weeks but British Summer had other plans as usual, humidity has cosistantly been in the 90s and it was a risk i know, but sometimes you have to walk the line. Whilst carefully taking her down this eve i noticed more hiding and ive basically lost about half the plant! On thr upside theres still a good amount that was saved and what there is is absolutley loaded with trichomes and super sticky, il update with weight once dry. Ive also got a big bag of super sticky trim from this gal which will be loaded into a bong at some point i suspect 😉 I hope youve enjoyed this diary and i will follow with smoke report soonish, thank you to everyone who liked or commented and take good care my friends 😊✌️

Hi everyone ! Everything is ok, no disease, no carrency. 👌 they start to smell a little and pistils appear everywhere 😍 i change the nutrient solution and start with PK 13/14 See you next week ;)

easy trim✂️ The buds are Absolutely perfect,exactly what i was looking for🤩 Green pheno : cookie,diesel & gelato🍪⛽️🍦 Purple pheno : flower,sweet & honey🌸🍯 After 7 days on the dry rack she was ready for the jar to start the curing process.😋

The Gelato has responded well to the topping, the new brunches are growing and the main leaves have opened to collect maximum light, it looks a bit like purple lemonade as a vegetative growth.

Und das nächste Giesswasser steht bereit 🌊 Hesi Schema auf 10L💧 Supervit💥 Hesi PZ 20ml🍃 Hesi Bloom 35ml Hesi Phosphor 15ml🌳 Plagron CalMag Pro 10ml Ph angepasst direkt beim gießen mit lemon🍋 kick Wächst super und bin gespannt auf Bud Entwicklung bei den unterschiedlichen LEDs🔮 Es geht entspannt weiter und es gibt bereits markante Unterschiede zwischen den LEDs dazu mehr wenn der Grow sich dem Ende nähert 🤚

🎩🌈🍬

Day 7 today from sprout. They are doing great, but i have sometimes 29c in the tent and my humidy sometimes fall to right under 40% which i dont like, but the girls seems to like it. Also i lowered both lights 10 cm down.. The Led is about 70cm above, and the HPS 70cm. I may begin feeding them very soon with BioGrow and BioHeaven but only 1/4 of recommended dossage. In the night i now have around 60% humidity, and it also helped me get my core tempature down from 28-29c to around 26-27c because my lights wasnt on 24h anymore

Tag 85: + Generative Phase III der Canna Dünger Tabelle + Lichtdauer von 16 auf 15 Stunden reduziert. Ein Video und ein paar Bilder für den Größenvergleich . Ich hab versucht so nah wie möglich an die Buds zu kommen ohne das ich die Trichome platt drücke . Ausserdem hatte ich gestern noch etwas Entlaubung betrieben . Tag 86: + 2,25L Flaschenwasser (16:00 Uhr) ++ Dünger Blüte +++ Generative Phase III des Canna Düngeschema Leicht + final PH 6.10 Die Dame war heute Morgen noch fitt und noch Wasser vorhanden , 7 Stunden später war schon ein sichtbarer Wassermangel aufgetreten (Die kleinen Fanblätter hingen schon leicht). Tja so schnell kann es manschmal gehen . Tag 88: + 2,0L Flaschenwasser (16:00 Uhr) ++ Dünger Blüte +++ Generative Phase III des Canna Düngeschema Leicht + final PH 6.00 Tag 89: Tageslicht von 15 auf 14 Stunden reduziert. Tag 90: + 2,0L Flaschenwasser (13:00 Uhr) ++ Dünger Blüte +++ Generative Phase III des Canna Düngeschema Leicht + final PH 6.00 Tageslicht von 14 auf 13 Stunden reduziert. Photos mit Dose zum Größenvergleich !!! Und ein Video !!

Well thats my grow diary. I hope it ends up being informative of helpful to someone somewhere along the line. I have more grows going, but I am going to skip on diaries for now. See you next time.

Enjoyed every second of this grow.. It's grown so fast lol!! She's absolutely stinks so make sure you have a good filter 😉 Her structure is out of this world. Would definitely recommend this stain.

Update: I made a Flowering feed guide for myself so I figured I would share it. I'm going to do a small flush on them soon to remove nutrient buildup. I'm sure it will help finished quality. The first girl has been stretching all week. I have had to LST branches to keep her short. I hope she is done stretching but if not I will just keep tying branches down. She did make it too close to a light and it burned one of her buds. It did not cause any issues tho. On the second girl I was tying down the main stem and damn near snapped it off. I freaked out and cried IRL. 😭 I braced the top broken half and taped it up then I gave her a large dose of Silica and Recharge to help her recover. Only the broken top of the main stem went a droopy for 4 days and she almost stopped growing. She developed some rust spots on some of her fan leafs. I gave her Cal-Mag the second I saw the spots developing but they developed regardless. My guess is that she used energy in her fan leafs to help her recover. The good news is she looks fully recovered. 👊 I can feel a knot where the break is, very fast recovery for such a bad break. For sure this was my worst LTS accident to date. I will get a pictures of the break when I feel comfortable removing the tape. I upgraded there lights with 2x 100w 3000k flood lights with the lens plate removed. I have had really good results with these lights in previous grows and they are thin so they fit perfectly. I now have: 2x Castnoo 300s (really 100w) 1 Grow Star 150 UFO(really 70w) 2x Viugreum 100w 3000k thin flood lights (really 60w) 2x MAIICY 45w (really 30w) That's a total of 450 true watts. 225w for each of these girls. Very bright inside. Maybe over kill?

-Sponsored by: 🌴SPLIFF SEEDS🌴-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 8/7 After several days of Growdiaries making it difficult for me to write and respond to comments, I found that I can still update the journals. I apologize to everyone for the non-replies but I have replaced the main email and the email to confirm the account never arrives, and Growdiaries' customer service seems to be non-existent. 10/7 everything is going well, nothing special to add🤘🦄 12/7 surprising how humic acid speeds up the growth of these wonders __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Are you new to the world of cultivation and don't know where to safely buy your seeds? Fast and anonymous shipping. Check out their hilarious graphics. (no affiliate links) ✅https: //bit.ly/spliffseeds_ __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

It's slow too slow 😅

Week 7

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.