Just started them all on the Green Buzz Liquid Organics and will run it the rest of the way. I'm not going to add much to the line just some calmag, enzymes maybe terpinator I have to experiment with it a little bit. The first feed went extremely well the plants instantly reacted within an hour after the feed especially the next day. The additives in this line barely raised PPM at all which I liked. It also doesnt stink like other liquid organics I've used. The big one is very healthy and got some light defoliation 2 days ago. The small runt has looked like dog shit and still does but after the feed it reaches for the sky for the first time in a while.

Growth of 'only' 11cm this week 😅 Just over 8" Still she is growing very nice.

This week i transplanted to prepare for flower, watch the video and see exactly how I do it step by step. Sonnenerde discount code POT5

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) A seed germinated via skotomorphogenesis (in the dark) will generally develop faster in its initial stages to reach light, though it will be etiolated (elongated and weak) and will switch to slower, more robust photomorphogenesis (light development) once it emerges into light. While skotomorphogenesis is a rapid, growth-oriented process for soil escape, it's a temporary phase; photomorphogenesis is a more sustainable development program that prepares the seedling for photosynthesis. 18/6 with the 6 being IR instead of darkness, keeping temps overnight a neat 77F-80F. PPFD overnight 1.8. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over, this creates a strong pressure differential which will work wonders on your grow. replicating high and low pressure fronts in nature, critical for oxygen diffusion, but more importantly, full control of your RH%. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, resulting in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow slower to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.

Day 42:Well its halfway though the flowering cycle at least now and I thought with the genetic mix of her parents that she would be a full 11 week sativa cycle. Seems I may be wrong!!!!. She is beginning to colour up nicely now as though she is headin for the finish line. By far the the most ripe of the 9 strains which is surprising as she was younger and had 2 weeks catching up to do before the flip. She is even looking more advanced than the fast flowering Tester run in here now. The Gz mother was completely done by week 9 so maybe they will follow her rather than the longer Gelato41 time. She smells very fruit sweet with a slight hint of a diesel/gas. She is really oily to touch now and even low down where the larf would normally be a little pointless , she has put out medium sized buds too. . I am very happy with her whole cycle so far and she has not been slouch at all. Seeing her overtake the race and showing off is a win for me and the Birth of GanjaGrandaddyGenetics ,GGG seeds. lol Have 2 strains of my own at harvest nearly now and the Hulklato I featured in the last update has given out a very good 6 oz with around 1oz of that being larf and small buds. Not too bad for a first seed popped. let's see if this little lady can come close to her cousin. The NFT system has made the grow the easiest "hands off " growing i have done. Only needing to top up the res and leave it till it needed it again has been a lazy affair but to see an old school system like this work so well compared to the many others I have since used , has been a surprise. I dont know why NFT dropped off the radar but for anyone who is new to growing , it is a perfect , easy to set up and use medium. Good luck on all your grows. catch you at the next update.

This is week 4 we are about to flip them to flower. 8 strains being test grown new strains.

Well I had to break down my tent this week. Long story but I took some clones to do these at a later date. Minor setback but hopefully I will be back up and running again soon. These are the pictures from right before I broke it down.

Plants are loving life Got a exhale bag There made in a town in the state i live in thats BA Hows The Girls Lookin 2 You Guys, i need advice im an outdoor guy so all this building my environment is new to me

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush

16.09.2024 / Honey Cream Indoor They where Watered with 500ml each every 3-4 days. They are growing good and looking healthy

Unfortunately, once again (last grow too) I had some bud rot in the last week before harvest in both plants with the biggest one largely affected. Because of that, I had to remove all infected parts and have an early harvest. I picked out all fucked buds, gave my plants another two days of (finally!) sunshine to dry out the cut-outs I did on the plants. Today I harvested the smaller one and was surprised it actually was quite alright in terms of yield. Tomorrow, I'll cut the big one and I hope there will still be some good bud structures left as this one grew so nice, especially for being a dwarf :-D Will update as soon as I've got more news! UPDATE: I cut the big one as well and am very pleased with the yield I have from this grow. Was not an easy grow since the weather was shit and I've had to throw away some decent buds because of bud rot, but all in all it looks promising :-) DRY WEIGHT: 48g of fresh buds (had to throw away at least what could have been 10-15 grams because of bud rot)

The moment that the top slightly burned, does not soar, rather surprised that it is not massive, because on top of more than 200,000 lux, the top left call fell off the leash and rested directly on the reflector for some time, but as we can see in the photo, a couple of flowers

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D57/B20 - 11/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D58/B21 - 12/06/24 ⚗️ EC: 1.0 pH: 6.4 🌡️ T: 25°C H: 80% 🌊 8 L 🍗 Calmag - Bloom A-B 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D59/B22 - 13/06/24 ⚗️ EC: 1.2 pH: 6.6 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D60/B23 - 14/06/24 ⚗️ EC: 1.0 pH: 5.8 🌡️ T: 25°C H: 70% 🌊 15 L 🍗 Calmag - Bloom A-B - B52 - Big Bud - Bud Candy 💧 💼 Spinosad and pH- 🧠 🚀 🎬 1 TL video ______________ 📅 D61/B24 - 15/06/24 ⚗️ EC: 1.0 pH: 5.8 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D62/B25 - 16/06/24 ⚗️ EC: 1.0 pH: 5.5 🌡️ T: 26°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D63/B26 - 17/06/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 26°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video

🎁🎁🎁

Woche 7 und die Automatiks gehen in die Blüte. Tropicana Cookies purple Auto, fat Banana Auto und Apple fritter Auto. Die feminisierten wurden nach der 5. Node getoppt und verzweigen jetzt, LST bei den Autos wirkt. Hab die pötte mit Hornspänen (Stickstoff) vorgedüngt, deshalb noch kein Flüssigdünger. Erst, wenn die Blüte oder Mangel kommt. Es läuft ganz gut 👍 bis nächste Woche ✌️

Can't wait for each of them to finish out. Giving them hopefully their full amount of water, less with the auto as it was stunted by the 12/12.