Likes
Comments
Share
@russrahl
Follow
Got the girls into there flowering tent and there 5 gal RDWC system under a 1000w HPS on a light rail mover. We are flipping them now because these DWC systems produce massive plants. We are going to tuck through the stretch until they stop this time and try and keep them as low as possible. I’ve grown this strain before a few times and ran a couple clone runs of it as well, so I think I know what to expect hopefully. Lol this is a spectacular strain from an A+ breeder(Canuk Seeds) and I can’t wait to smoke her again! One of those tried tested and true strains for me...lol I will also be keeping the light at max height and punching them with 1000w rite from the get go instead of lowering the wattage and trying to get the light closer to try and conserve power. I get a better light spread at 1000w 3 feet away and don’t have to move my light as much to cover the roughly 4x6 foot space of the tent I will be flowing in. The last 2 feet of the tent are reservoir and air conditioner. I don’t want the cold air to close to my plants so I try to keep a buffer zone. I will be adding a cardboard wall I think across blocking the air conditioners direct air output and blow it across the tent with my oscillation fan instead. I also have my second water cooled thermoelectric reservoir water chiller built now and I will be installing it in this reservoir as soon as I get a chance. I’m making a how to DIY video for it so it’s taking a bit longer to build and install as I’m trying to document the entire process. So probably next week I will have it installed and running for the weekly update and I’ll post some links to the DIY video as well if I have it up yet. Couple weeks ago I over nute’d them and ended up with nitrogen abundance so I countered that last week with a very low EC at 0.2 and the rebounded quick, so quick they went the opposite and I had nitrogen deficiency within the week. Lol so they are now in there new homes and sitting in 0.75 EC water with 6.0ph and they are coming around now. Well that’s it for this week folks, Cheers! 💨
Likes
4
Share
Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).
Likes
65
Share
Flowering day 37 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The whole plant itself looks perfect 👍. The growth has slowly stopped as the full energy goes into the production of the buds. This week it was watered 3 times with 1.2 l each (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.barneysfarm.com/dr-grinspoon-5 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Processing
Likes
26
Share
Plants are going into flower. I took night time pics so you can see them sleep. They are a all looking great. This girl and her sister at the moment is 24 inches. Very nice branching on all three plants. I should defoleate and remove some of the bottom branches now.
Likes
30
Share
just keeps growing nicely. Can't wait to have some room to put this in a bigger pot. Going to have to shuffle plants around hope the nice weather comes outside soon, need to move some plants outdoors.
Likes
4
Share
So I was really happy to have the opportunity to grow this strain I have my clones are ready My next grow will be sour headband and GDP they are all in veg
Likes
78
Share
@Wastent91
Follow
Ehi ragazzi come va questa settimana?! Tutto bene?! La mia settimana è stata un alti e bassi di momenti di merda ... Purtroppo la ragazza tropicanna ho dovuto toglierlgla di mezzo xké faceva un odore davvero potente ed era esageratamente grande! Purtroppo stupidamente mi sono fatto prendere dal panico dalla situazione accaduta al mio amico che aveva i miei messaggi e numeri sul telefono.. vabbè è andata così ormai.. mentre devo dire che la Cherry cola della fastbuds sta diventando davvero una ragazza tozza e massiccia , con internodi stretti ma robusti! Sta crescendo molto bene , le God sto un po' di orgatrex e bactrex per continuare a fare vivere i microorganismi presenti nel suolo ! Ho trovato delle foglie con macchie marroni e arricciate che sembrano indicare un deficit di fosforo , ma sinceramente non sono ancora così esperto da capirlo velocemente.. spero continui a crescere e riempire tutta la grow , a giudicare dalle foglie a ventaglio davvero imponenti le cime saranno altrettanto grandi spero! Grazie alla luce di Mars hydro sempre di qualità superiore e agli strain di Fadtabuds posso dire che questa bellissima esperienza è potuta divenire realtà !
Processing
Likes
10
Share
starting off week 2 with a res change, had my ppm in the 500 if she struggles ill bring her back down..... roots are coming along nicely was starting to get root rot due too my temps sky rocketing and having too much water in my res.... roots seem to be coming good after lowering water level high ppm seem to be not a problem.. started folding leaves to expose lower nodes.. think i will top at end of week 3
Processing
Likes
9
Share
@H473crew
Follow
HST - heavy feeding - defoliation this week. Should of been done last week *shameface* now some of them are very top heavy and are starting to bend, this is also due to having my clones way to long to begin with. They should have been a lot shorter. 😤 Very happy they have finally picked up from such a bad start in the beginning. loving how short and bushy they are. 😃 Next week will be changing to Flower Cycle 👽
Likes
61
Share
Hello present and future growmies! Welcome to the start of week 9 for Queen Citronella. First things first, please go and check week 8, I update daily and the week is now complete. Day 57: Her majesty is parched and so overgrown in her space that I've decided to give her a haircut. It will hopefully make her easier to move about too. I've fertigated 10l today and performed LST adjustments and significant defoliation. Made a little collage to show the training I did. Day 58: Tried to colour correct photos. Any good? Day 60: Disaster! SOMETHING has gone horribly wrong! The Queen is unwell and now I shall try to figure out why. It seems like heat stress but I don't get how. Alright I think it is heat stress but I am not sure how, the temp hasn't gone above 26 degrees to my knowledge. Two things have changed this week first my house has been about 3 degrees warmer, and second I switched the main tent to 20 hours. I wonder if the additional time and the extra heat in the house has caused it to get too high. I have opened a flap at the side of her tent, and I am going to drop the light in the main tent down to 19h. As well as this I am now leaving a window open when the lights are on. Hopefully I can stop it getting worse but it is all over the plant. :( Okay soI think I have caused nute tox/shock - specifically I think what happened was an accidental big overdose of CalMag raising the EC too high. These symptoms came on way too fast to be a simple deficiency or lock out, and the PH wasn't so far off as to cause these issues. I've treble checked and the temp hasn't exceeded 26 degrees, nor dropped below 17. I flushed her through with PH water today approx 40 litres - until runoff was clear and correct PH. I am not going to nute her for a day or two. Day 62: I have ordered the queen a new tent. 75 x 75 x 200. She's still asleep at the moment but I'll photo her later. She's really taken a hammering from, what I now believe is, nutrient toxicity. Day 62: Her majesty is looking much revived compared with the last few days. I THINK she will be ok. I've made a video assessing the damage. Ouch. Sorry your majesty, please not off with my head! Day 63: Alright I have a new tent for her majesty arriving next week and I've new airflow for the main tent. She seems to have recovered from the burn and is stretching again. End of week summary: First big mistake and first serious issues for Citronella. Sorry about that. However she has now recovered and is growing again. I cannot undo the damage but I think I have halted any further damage. Let's see what happens next week.
Likes
102
Share
Here we are starting week 5 with this beautiful plant (the big one, I should give her a name...) who went through all her vegetation weeks showing great strength, thriving like a boss and making me so very happy! What a therapeutic experience 😎 On day 32 I decided to introduced a 1000W LED monstrosity light to the grow environment, hoping to give a nice boost on her first week of flower, than a rookie mistake happened...of course. I forgot to raise the lamp further up, that caused a slight burn on the tip of a hand-full of leaves. The good news is: she is doing just fine as beautiful as ever. :)) The little girl got another defoliation session and she is recovering well after mainlining last week, but man.... she slow...she very slow. There Is strength on her, I noticed her little branches curving against the mainline ties, she is sassy Im telling you. I am going to insist to see what happens. Overall the girls are doing just fine, my two other seedlings are coming up sweet'n fast, I should've have planted all 4 at the same time! *FutureNote* Now a quick question, what is the lifespan of a Chinese 4'' carbon filter from Amazon? Apparently 5 weeks LOL. Here I am now researching carbon filters, quality + price, to make a new order before my place smells like Snoop Dog's soul. #RookieGrowerProblems Thank you all for following along, Thank you for the tips and advices, Stay Lit folks.
Likes
4
Share
Last week's vidoe. For some reason, it's taking like minutes to upload thirty second videos. I will try my best to show the updated videos on a lot of these plants.Now i'm impressed with a lot of my autos growing in this naturally derived nutrient.Solution
Likes
10
Share
@KcKush
Follow
*Increased PPM from 450 to 550 *Topped all plants. *One of the white widows is showing purpling on the stem don’t know if it’s generic, coldness, or something.
Likes
210
Share
• This is what's in the box. The new fce6500 👍. Now i got the fce6500, the fc4800 and the tsw2000 that will be in the 8x8 Grow Tent 🤘🤘🤘🤘. Its so bright now I can probably get a nice tan in the tent🤣🤣🤣🤣👍. Next grow will be awesome so stay tuned for my next new diary that will have almost 50 strains🤯👍🤘. I will be keeping the drivers for the fce6500 and fc4800 outside the tent to keep the heat down. They don't get that hot but it will be better outside and I won't worry about extra heat. • New FC-E6500 Led Grow Light-FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective compared with other same type lights.Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. • Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliver • Superior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat, save 50% energy than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. • Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD FC-E6500 LED grow lamp enable cultivators to produce Density Buds, perfect for full-cycle hydroponic,soil,grow tent/room growing. Dimmable Commercial Grow Light: Cost-efficient,easy dimming & daisy chain max up to 20 lights, IP65 Waterproof, master light easily controlled for commercial & home horticulture. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny GET THE BEST FERTILIZER ON THE MARKET👍 GREEN BUZZ https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll FOR 15% OFF https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
70
Share
So this is how things are looking for the Dark Phoenix, happy with 3 of the ladies but there's one that's just been diformed from the beginning. I have uploaded a video for you guys, any questions just ask away 👍🏾🌱💚
Likes
7
Share
Overall, the Girls are doing great. #2 is still showing some nitrogen excess, but is doing well. I’ve adjusted her feeding specifically in hopes to correct. #1 is not showing the same issue, and is motoring along. Both are stacking nicely, and are bringing on some smell now, and are sticky to the touch. I estimate about 3 weeks more, but who really knows with Autoflowers? Happy Gardening 🇨🇦❤️🌱😎💨
Likes
15
Share
Bastante bonita, buen producción a pesar de que le dio botrytis en la copa principal y tuve que cortar por prevención. Un olor muy original, honestamente me gusto mucho, la considero fácil de cultivar con un plan de nutrientes medios.