this week is going really good! I am flushing right now with just plain water. I was supposed to harvest but I decided to give it another watering since the ppm values were the maximum recommended for harvest and I want as less fertilizer in my buds as possible😁 next time I'll water I'll give them 4/5 liters per plant and when the soil is kinda moist and about to dry I will give them 24 hrs of darkness to increase resin and then FINALLY chop everything off! I'm really excited to try them! they smell really amazing.

Un altra settimana è passata e tutto procede bene.per fortuna non ho più trovato nessun nanners 🙏✌️💪..belle piantine mie, continuate così che farete delle belle pannocchie.... 30/8/24 gente ho combinato una bella cazzata.pur avendo esperienza, mannaggia a me,mi sono portato a casa dentro il box, il cazzo di ragnetto rosso... fanculo... Ho già iniziato a ripulire tutto, box e piante con Neem...li sterminerò tutti 😂..

Harvest time is here for both Mandarin dreams. Both plants were frosty, sticky and healthy, with MD2 being the better of the two. Will update in 7-10 days with dry weight and smoke report. Thanks for stopping by 👽🌳🔥💚 Update 01/26 - dry weight of 141 grams, MD1 surprised me with the higher weight, her buds are much denser than MD2. Smell and taste is fruity, citrus, with a little berry.

Just because i realized im not really providing info about my potted grow but I have been using Mother Earth coco plus perlite i added worm castings, bat guano, n vegetable garden 4-4-4. just p.h'd water at 6.50. once in flower i would water with a diluted solution from my dwc and PPM under 200PPM.

🤩🤩

Ich habe an der Pflanze Low Stress Training und getoppt, damit ich maximal Ertrag erreichen kann und wie bisher immer keine Probleme

Lunes 19 Agosto 2024 Semana 1 oficialmente como plantulas en jifys, dejaremos en jiffys hasta notar raíz abundante, jiffys hidratados con Agua con Enraizador Radix 10000. Veremos la evolución todos los Lunes.

23.08.24: I've done considerable defoliation. Also, FBP1 and FBP3 have grown all over the place. The stems are also relatively weaker as they've grown so much. (Photos above). Being as the plants were looking a bit delicate, I added some string and tied the side branches lightly to keep them a bit more compact. Additionally, FBP2 has a considerable amount of buds on the main cola. So I've added a plant stake, and I just tied string around the stake and the main stalk. The humidity has been able to stay under 53%. That's with 3 dehumidifiers. So I'm pretty sure that's about as good as it will probably be. I've had to lower the watering frequency on FBP3, as I overwatered only this plant. and also added too much Nitrogen in. As a result all the leaves are looking droopy. I'm really not sure how this will pan out, as they all still look like they're weeks away from harvest. Anyway, I'll update throughout the week. 25.8.24: I was tending to the garden a majority of the day, and realised that a branch had broken on FBP2. I acted quickly to insert plant stakes, to provide the heavily laden branches additional support. See photos above. The branch was bent or snapped, but still in one piece. I used duct tape to carefully put it back together. Before making a stake for it. Silica, apparently wasn't quite enough to get the FBP2 through the whole way. The flowers are very heavy and dense. I have also given the plants water yesterday with concentrations of the following nutrients, per plant. ● 9ltr of dechlorinated tap water with 6ml of cal-mag, 3ml of Ecothrive Flourish, 6ml of Xpert Nutrients Bloom Booster. I have also added cinnamon top dress after watering, as I have noticed some fungus gnats. I checked the trichomes through one of my loupes yesterday too, and nearly all are still glass like in appearance, with some cloudy here and there. I'm definitely going to have some time left on these girls. I did check the PH if my soil on all plants as I was concerned about nutrient lock out on FBP3. All pots tested out at 7.0 Ph exactly, before and after watering. Thanks for reading my diary 😊

On 7th day of flowering we removed lower little branches and made some lollipopping on the plants. Also we made some defoliation on gelatos cause they were very bushy but almost removed only biggest fan leaf. As plants were bigger enough we started adding granural mineral NPK 12-18-23 1 g/L and CalMag Xtra by advanced nutrients 1mL/L to the solution.

Just starting , This is my soil mix! Only took two days to break soil pretty sweet!!

Floracion (Tiempo estimado 64 dias) Primer Semana de Floracion 08/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 09/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, subir demaciado la intencidad del ventilador fue contraproducente ya que las hojas sufrieron quemaduras por frio, se a empezado a regular un poco mejor la temperatura pero el intractor y extractor de 4 pulgadas no estan eficiente, empeze a provar con hielo embotellado para bajar temperatura de la solucion nutriva, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 10/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 11/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 12/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 13/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, se cambia extractor por uno de 8 pulgadas con filtro, se mantiene la temperatura a 21 grados con la lampara a 75 % de potencia, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 14/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad.

This was a brilliant week for plant growth, with some side branches over doubling their height. I added the ScrOG net at the beginning of the week and began some more intensive training. The broken mainled blue has fully recovered from last week's damage, and is quickly catching up the my other mainled experiment. The LST only plants I pretty much just continued to bend. The topped & LST'd plants I removed some of the lower bud sites that were not getting any light. I also removed a few awkward fan leaves that could not be tucked away. The addition of the net has helped with this though, as keeping the canopy even is much easier with the support it gives. I also decided not to try any further cuts on the (half) mainlined auto's. My reasoning is that they have developed strong, independent colas already, so cutting for more would not see much gain. The plants had also begun to flower on the night I went to perform the second cut, and my growing experience tells me not to mess with flowering plants too much so here we are. I gave the plants one regular watering of 10L pH'd water, and a 20L nutrient mix using the ratios stated above. All volumes were split equally between the plants. The scrawny looking blue critical has perked up a heck of a lot, but is still the weakest of the 3. The strongest plants by far are the ones that have been topped and LST'd, closely followed by the mainlined ones. LST only is definitely great, but it is clearly lagging behind the other two techniques.

Great easy grow, took well to led grow and nutrients never needed to step back. Needed support fairly early on in grow. Heavy flowers not massive but I guess loaded with oils and good stuff. No apple smell or taste with these two phenos at all. Both super heavy chem affairs. One however tastes a lot like gorilla glue, it is one of the parents. This cultivar has shot straight to the top of my lists of grow again. It’s pure fire.

- So far 2 males have been found. Pot #2 &7. - i see pistols showing sex maybe flowering next. - LST 1-6 - 7-11 received no LST for testing purposes. - Increases PPM to 400 - Right side receiving triple 20 look more bigger so far. Haven’t been able to upload videos I’ll try on my pc.

Hello everyone, all good for this week 😎 They grow fast and with a beautiful green colour on the leaves! In this grow i will be testing out Plagron Nutrients and Mars Hydro FC-E6500 LSD-25 from Fast Buds 🍷🎢

I was traveling ... to give information ... the temperature has dropped ... I think she will be even slower outdoor ....

The plant has settled in now, and it's beginning to grow faster now. The stem isn't as thick as that from the Banana Kush Auto I grow parallel, but thanks to the added silica, super solid and rigid. LST doesn't seem like a great option, will probably try FIMing, or maybe Topping. I'll add photos later, that'll show the result of this decision process. UPDATE: I decided to FIM the Fat Monkey, to increase side branch production. ANOTHER UPDATE: I might've taken off a little too much when FIMing, which turns it into topping, I guess.

Well it's finally time to cut her down. It's day 95 post germination for this lady, and she's at maximum potency. All trichomes are cloudy with about 5-10% amber & she's giving out a mixed palet of aromas. I can smell a very distinct mix of lemon, urea, skunk, and spice. It was relatively easy plant to grow. I started in a super soul which ran out of nutrients early and I had to supplement with bottled nutrients. Going forward I'm going to have to put more thought into my initial soil composition. Please note: I'm only estimating the 'Wet Bud Weight'; for the purposes of this diary I estimated 12-16 ounces. Cannabis can loose up to 75% of its mass during the drying phase and based on past experience, I am expecting 4-6 ounces of finished flower. Dry/cure process: 1. Cut entire plant down by main stock 2 hang upside down in a dark room with controlled humidty and temps.... - Temperature should range from 67-72 °F, and my humidity will range between 57-60%. 3. Full trim complete after 8-11 days of drying. 4. Stick in Mason jars indefinitely with 2-way Boveda humidty packs (62%). 4-20. Smoke 2 joints before you smoke 2 joints.. and then you smoke 2 more ☮️ I'll post a thorough smoke report in roughly 3 weeks Thank you growdiaries.com Thank you growmies Thank you Fastbuds