The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
Likes
102
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23.5c Turn off if temp goes above 23.5c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 58% with 2% steps Max speed 8 Min speed 3 VPD aim 0.7-1.1 Wednesday 22/2/23 Day 29 7.30pm #3 Dli=24.1 Thursday 23/2/23 Day 30 10.00am Feed for 3hrs 5L used. 1.6L each Need to try a different pump. Friday 24/2/23 Day 31 8.00pm Everything looks fine. 10.00pm Extractor settings temperature 24c with 1c steps Humidity 55% with 2% steps Max speed 9 Min speed 3 Saturday 25/2/23 Day 32 7.00pm #3 Height= 27CM Dist= 42CM DLI= 25 Sunday 26/2/23 Day 33 1.15am Feed for 1hrs different pump. Different pump is better. 10L Ec=1.59 Ph=6.3/6.3 2L left 2.6L each roughly. #3 run 0.35L Ec=2.15 Ph=5.9 4.00pm Radiator settings LIghts on Turn on if temp drops below 23.0c Turn off if temp goes above 23.0c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Monday 27/2/23 Day 34 7.30pm #3 defoliate some lower stuff. Tuesday 28/2/23 Day 35 #3 Height= 31CM Dist= 40CM DLI= 25.5 The 1st week of flower has flown by. I'm quite happy with how things have gone with the grow so far. The environmental system seems to be keeping conditions a lot closer then I could manage using guess work and timers, probably the best investment I have made for growing. #3 Gorilla Cookies FF has recovered completely from the accident last week, considering the top was only hanging on by a few fibres the job I did with the tape has held her together quite well. She has been spread out under the net this week to keep her height in check. She has been defoliated during the week and her lowers that won't see the light have been removed. She started showing pistils at the end of the week. Power used for week Light (1.85+1.79+1.79+1.78+1.75+1.75+1.75)=12.46Kw Extractor (0.16+0.12+0.14+0.15+0.14+0.17+0.18)=1.06Kw Fans (0.39+0.39+0.41+0.4+0.39+0.39+0.40)=2.77Kw Dehumidifier (1.26+0.62+0.73+0.04+0.11+0.55+1.61)=4.92Kw Radiator (1.59+2.70+2.28+3.6+2.86+3.15+3.23)=19.41Kw Water pump. (0.0+0.01+0.0+0.0+0.01+0.0+0.0)=0.02Kw Total for the week=40.64Kw Back in a week. Thanks for stopping by.
Likes
2
Share
@Brasson
Follow
She's doing great. Heats been giving me a little problem still but no more fungus I can see an the bugs havent bothered her much. I've noticed that I let her go kinda long 😅 I still would like too flush her before cutting down so like what 2-3more weeks? Should I go ahead an start flushing?
Likes
183
Share
Germination date 🌱 12/07/2021 Day 120 12/11/2021 Strain 🍁 Ethos Genetics Banana Hammock R1 (Mandarin Sunset x Grapegod) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15%off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 And we are DONE 🌱🍁.. In my opinion the worse one out of the 4 but still smells incredible and is coated in tricones. Green buzz liquids smashing it out of the park. All 4 smell different and potent 👃🏼 great nutrients 👊🏻 Organic proving why its the future of growing. FC4800 is a beast of a light and for those wondering this out does the equivalent sf4000 from spider farmer hands down. Colours are unreal and the buds are nice and dense 💚 Marshydro gets my vote 👍🏻 Remember PROMO codes for both GreenBuzzLiquids and MarsHydro.com in the grow bio above 🖕🏼 Happy growing fam ❤️🌱🍁👍🏻
Likes
9
Share
I grew all of my plants the same and with 3 strains and only being allowed to have 5 plants total I have to pick the strongest growers and hope they stay strong and this time for me the gamble payed off nicely with a good harvest. I would recommend this strain as it grows fast and did not seem to be a picky eater and took in a lot of heavy feedings... Thanks for checking out my harvest and If you have any questions I will do my best to quickly answer them..
Likes
25
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry
Likes
8
Share
Processing
Likes
22
Share
02/08/20 (Sunday) 9AM - Continuing off of the great progress of last week I decided to take the initiative and attempt 'repairs' to the photosynthesis of my plants with compromised leaves using surgical tape. Unfortunately after one too many readjustments on one of the first true leaves of the SVG I caused some minor lacerations on the leaf; it should be fine though. 11AM - All four plants were fed. 5PM - I decided that it would be more beneficial to just defoliate the first true leaves and start lst on the SVG so it'll have a little more energy to grow the tops. Left the top leaf on the abandoned original stem to help with photosynthesis and not over stress the plant all at once. 03/08/20 The SVG seems to have responded positively to the training and is growing rapidly. 04/08/20 Had an exhausting day yesterday and fell asleep before I could turn off the grow light leading to the plants getting 24+ hours of continuous light. None seemed to be stressed and were immediately put to sleep for 6 hours before continuing their light cycle with a shorter day so they'd fall back on schedule. 05/08/20 The plants enjoyed a new record of 10 hours in the sunlight and are starting to look ready to stay outside for the entire day. Noticed one fan leaf on the Jam had evidence of leaf miners and decided to remove it to free up wasted energy for the plant. 06/08/20 More leaves are showing signs of miner activity so I feel it may be time to start considering an early topping. 07/08/20 I decided to do an early top on all single cola plants at their third from the bottom 3+ leaf node to help control the miner problem. Considering keeping the plants as indoor instead because pests seem to be targeting them in my gallery garden, but none of my other species of plants. Took some advice and squeezed all the leaves on the Jam to kill the leaf miners. 08/08/20 All leaf miner progress seems to have been halted.
Likes
53
Share
@Roberts
Follow
Merlin Mintz Autoflower is growing good. I am just maintaining the lst training. I am trying to keep her as horizontally growing as I can till she starts to shift to flowering. Everything is looking pretty good at the moment. There is nothing to report at the moment. Thank you Spider Farmer, Aeque Genetics, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
12
Share
Plants rebounded completely, no deficiencies to be seen. Leaves were twisting from excess blowing air. Positioned fan higher, instantly solved the problem.
Processing
Likes
10
Share
@GrowerGaz
Follow
A straight forward week as the autopots are doing the watering and the plants are growing fast and strong. I have given them a KNF foliar feed today , see video for content. Two of the Radio Z ate looking quite similar. Radio z 2 is a beats real thick stems. Looks male . @lumatekeu attis 300w is set at 80% , have added a Inkbird hygrometer. Which I love .
Likes
15
Share
@GYOW2B3
Follow
Hi growers! Milkyway has started forming very hard flowers covered with trichomes and the smell of the flower is really amazing!
Likes
17
Share
We’ve now reached the third week of flowering, and I’m thrilled with how well my plant is doing! I adjusted the nutrients recently, and it’s definitely made a difference. The plant seems to be thriving, and the leaves are showing a vibrant green, indicating that it’s getting exactly what it needs. Even more exciting, the trichomes are starting to form all over the buds, and there’s no shortage of them! It’s amazing to see so many trichomes developing this early on, giving the plant a frosty look already. The overall growth is still going strong, and the buds are getting fuller. I’m really happy with the progress so far and can’t wait to see how things continue in the coming weeks. I hope this nutrient adjustment keeps everything on track for a great harvest!💚🌱
Processing
Likes
13
Share
@GrowGuy97
Follow
Flower day 17 - All the ladies are looking great, starting to see a lot of bud sights & the smell is definitely getting stronger everyday I open the tent! Thanks for following & happy growing friends!🌱✌️🏼 Flower day 19- Got a bigger dehumidifier because I was having problems on days I would water the humidity would go through the roof at night so to prevent mold I bought a bigger dehumidifier but now it is throwing off so much heat the tent is pushing 90 degrees F at some points throughout the day so I’m not exactly sure how to fix the issue! Will definitely not be running so many plants in the next run for the 5x5! Hopefully things get better!😅😅
Likes
Comments
Share
Likes
60
Share
👉Alrighty Then👈 👉Apple And Banana 👈 week 6 of flower So we had some real nice growth this , had to do a little leaf management👈 flower mode activated...... Everything is looking good 👍I'm using well water which is hard so I'm having a few issue but I'm on it .... So ive up'd the nutrients to accommodate pre flower ..... Soil by Promix Nutrients by Cronks Lights by MarsHydro.ca FC4800 X UR45 X Adlite Deep Red And Blue Tent 4x4x6.5 & Equipment by MarsHydro.ca High reflectivity inner mylar Thick Oxford fabric Smooth heavy duty zipper Sturdy metal frame Zipper blackout cloth Good anti light leakage performance The 6in Inline kicks ass moves alot of air ●Blue Light Effect: Blue light shortens internodes, resulting in shorter, stronger plants, ideal for supporting fruit development later. During vegetative growth, blue light promotes lateral branch development effectively. Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈 Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈
Likes
5
Share
@CHEFCHAPO
Follow
It's Amazing Strongest Strain Resistance,this place in 950m from the level of the sea all days Wind days becouse Strain is resistance of wind becouse have good root systems,this strain XXL <3 not XL PS. WATERING every 2 days 2L and Barrier in Vegetation Stage only Sprey
Likes
22
Share
The plant has two colas with signs of polyploidy - both colas "twins" are on the same level, opposite each other 😍 I shot a short video - I still need to add special effects, for this blockbuster 😂 The height of the plant is only 23 cm 😀