Likes
8
Share
Hello everyone! I promised to track this grow very closely this time and ufortunately life got in the way. Here is a quick sumup of the grow. First of all- One of the sour stomper plants unfortunately didn't make it. It died at about week 4. The main stem somehow had rubbed/broken down. That's why it was falling down. It was almost like a mini beaver had chewed it off at the point where the stem touches the riot rooter. At first I thought nothing much of it, maybe it hasn't been rooted in quite well yet or something. And I was constantly touiching it when watering, that made it worse. Soo the leaves were dropping and the plant looked very weak. Then I decided cut thr rapid rooters top layer and found out the severity of the problem. Tried to tape it up and other things, but it was too late. At the end it appeared all good as the remaing plants got so big the I had some space issue so I wouldn't have been able to fit another plant in anyway. At that time I finally made my self-draining saucers. I took me a while and a lot of effort, but finally they were ready and working well. I also installed the self watering system and flowering was starting. Pretty soon I started noticing weird leaf symtoms. Brown spots, different kind. Some plants had it more, some less. Sour Stomper looked pretty good throughout the grow. Mango smiles seemed sensitive and Strawberry Nuggs were pretty strong until the end. The grow was basically me experimenting with the setup- changing watering schedules , changing ppm, ph and all that stuff to keep the leaves looking healthy and it was very hard I have to admit. Probably my hardest grow in that regard. But somehow, the bud leaves remained healthy and the buds really fattened up good. I got away with an amzing 700G dry bud harvest which was def a new record from one grow. And the bud quality is very good too! Next time definetly no more than 4 plants as they got pretty big and I thought it was a little overcrowded. I was doing some good defoliation too. I should have defolited strawberry nugs more tho. Sour Stomper got some amazing bud development from top to bottom because it was was growing next to strawberry nuggets which were really small most of the grow. They actually took the most time to harvest even longer than Mango smile. Mango smiles were ready quite early. Sour Stomper was just in time! I topped sour stomper and both Mangoi smiles, left SNs both normal. Looking back at it, the way I grow them, Should have topped SNs too. Would probably have more space in the middle and longer side branches. Probably wouldn't have been as bushy! I followed the full Terra aquatica feed chart until the end. I was supplementing with CalMag a lot as I thought the symptoms could have been from a CalMag deficiency as this was my first grow with RO water. Overall a very challenging but good grow at the end. First time no mold problems. A record breaking yield for me. Basically surpassed the upper limit for all plant probable harvest sizes. Got good smelling quality bud. Very happy overall and will continue experimenting with Mephisto beans in the future for sure! I guess what I like the most about Mephisto is how close to description the plant is, very stable genes in that regard. Next time I will also have to start feeding plants higher PPM feed faster at the very start. and during flowering. But still not 100% sure what caused the leaf symptoms.
Likes
12
Share
Die Purple Lemonade FastFlower steckt aktuell ihre ganze Power in ihre Buds. Sie sieht einfach Mega geil aus, jedesmal wenn ich ins Zelt schaue, fasziniert sie mich 💚 Infos: Gießwasser: 1L in 24 Stunden PH-Wert: 6.3 Nährstoffe/Dünger: S&R Organics 5in1 4ml/1L Vegan Phosphor Boost 6g Luftfeuchtigkeit: 50-55% Temperatur im Zelt: 20-23Grad Lichtdauer: 12 Stunden PPFD: 730-790 EQUIPMENT: Licht🌞: Marshydro TSW2000 300watt ✅️ Rohrventilator💨: S&P TD 350 silent.✅️ Aktivkohlefilter💢: Can-lite 300 Zelt⛺️: Marshydro 80x80x160 ✅ Luftbefeuchter: Spider Farmer 6L. ✅️ Wenn ihr coole Genetiken kaufen wollt, schaut mal bei FastBuds vorbei🏆 Da findet ihr sicher was ihr braucht Und wenn ihr parallel noch meine Arbeit unterstützen möchtet und gleichzeitig Geld sparen wollt Benutzt meinen Promocode GROWX für 15% off auf euren gesamten Warenkorb 👉🏻GROWX
Likes
2
Share
So far so good transplant to a 15 gal...good thing I didn't wait till nxt week...top soil sink to the bottom and was hand for the roots to get tru
Likes
Comments
Share
Beide Pflanzen (24K Gold & Gelato 33) entwickeln sich hervorragend und haben in dieser Woche deutlich an Dichte und Struktur gewonnen. Das Training zeigt klaren Erfolg – der Wuchs ist flach, gleichmäßig und perfekt für die kommende ScroG-Phase vorbereitet. 24K Gold reagiert sehr dynamisch auf das Low-Stress-Training. Sie treibt stark aus allen Achsen, und die Seitentriebe haben beinahe dieselbe Höhe wie der Haupttrieb. Ihr Wuchs ist energiegeladen, sativalastig und offen, was für optimale Lichtverteilung sorgt. Gelato 33 bleibt weiterhin kompakter, jedoch extrem buschig. Ihre internodalen Abstände sind kurz, die Blätter breit und sattgrün. Durch das wiederholte Binden und Umlenken wächst sie symmetrisch und kräftig nach – ein ideales Fundament für hohe Ertragsdichte. Das Bewässerungssystem läuft stabil: Tropfbewässerung mehrmals täglich in kurzen Intervallen. Düngung aktuell bei Canna Coco A + B → 4 ml/l, pH ≈ 5.8, EC ≈ 1.3. Die Pflanzen reagieren perfekt – keinerlei Mangel oder Überdüngung. Klimawerte: 🌡️ Temperatur 25–26 °C 💧 Luftfeuchtigkeit 60 % 💨 Stabile Luftzirkulation für kräftige Stämme Beide Strains zeigen vitales, gesundes Wachstum – Gelato 33 mit dichten, kräftigen Blättern; 24K Gold mit offenem, explosivem Wuchs. Das Training verläuft planmäßig, die Basis für gleichmäßige Blüteentwicklung ist gelegt.
Likes
59
Share
Day 47 ( 10 Days flowering): My last to update but by no means my least.!!. This strain is my favourite grower at the moment. This could change on harvest of the 4 strains but for her growing and training , she stomps it for me. # 1 In the living organic soil ( LOS ) is the biggest by a mile. This medium is a winner for me. The ease of use and the results for very little input now are amazing. Her pot is teeming with green life to keep her mulch layer active , her limbs are thick and ready to hold weight and she is covered in great bud sites. My clear favourite of the grow right here. Her buds are still looking very young but I suspect her slower building will be her sativa leaning and I think she will be one of the last out .lol #2 is keeping her pace with her sister quite well. There is a big difference in sizes which could be pot size but I suspect more medium based. She is a fair size and will be a good yielder. #3 As with the other strains, is the smaller of the 3. Coco and Mc cannot keep pace with their organic competition it seems. She is formed really well beneath the canopy and her limbs are nice and thick for holding the huge buds she will pack on. All in all , a great week and more to come.
Likes
12
Share
@SopChop
Follow
Looking really good, some of the leaves are curling down slightly. I think its from over watering. Towards the end of the first week into flowering and I'm extremely impressed with how well the lst has worked, so many bud sites on such a small plant.
Likes
17
Share
Day 49- I had a little mishap with the White Widow. It seems I may have most likely had a pH issue. Hopefully I've taken care of that. Gave them all a good flush with plain, aerated rainwater. @fast_buds @atlasseed @seedsman @sunraise @greengro
Likes
34
Share
With our RainBow Sherbet we are about a week late compared to the others, it is now starting to throw out the first hairs that reveal the sex, this is probably the plant where the main lining has been applied in a more effective way. If you look at it, the plant has a main structure that is a perfect T, this forms the main line of growth. From here the branches start up to the third internode where I topped again. On the laterals no topping except at the two ends of the main lining. It is really very beautiful to look at and practically flattened to perfection on the ground. With autoflowering plants, topping at the second internode is advisable as I did on this plant because it is easier to keep it low and perpendicular to the ground with the main lining and above all because flowering is anticipated as much as possible. Let's say that the plant starts to flower at the 5th internode, you understand well that cutting at the second instead of the third also saves time. It is a plant that has a long internodal distance so we have more time to shape it before the woodification and it is very suitable for late lst interventions. Another one is growing straight and is still small but I will show it to you soon, I have concentrated a lot on this one in main - lining. We will not see the super productive trees of the autumn harvest but I am willing to bet that we will have a lot of beauty and a lot of resin in beautiful bush-sized plants. Wait for the uncle BreadandBuds.... We are still using soil, feeding and all the recommended additives from Plagron 100% organic. We have moved on to the flowering start card that maintains the same Power Roots additives - Sugar Royal, Pure Zym and adds the flowering stimulant dear in my house for obvious reasons of Biscotti. Of course the basic fertilizer now is Alga Bloom. The Green Sensation when the flowers are already a little swollen, do not start immediately. The Power Buds must immediately stimulate the initiation and development of the buds. ---- Decide on the right soil and calculate your fertilizer schedule based on the soil on the official website. -- www.plagron.com Try a seed of this variety that drives us crazy.. ---- https://www.zamnesia.io/en/11230-zamnesia-seeds-rainbow-sherbet-automatic.html Zamnesia Description //A cross between Pink Guava, Sunset Sherbet and a hint of ruderalis, Rainbow Sherbet Auto offers a wide range of flavors, effects and more. This 70% indica-dominant strain reaches considerable THC levels (24%) and is suitable for both experienced growers and those taking their first steps in the world of cannabis cultivation. All the best that mother nature has to offer is on ---- www.zamnesia.com
Likes
3
Share
@Bluemels
Follow
Tag 25: Die Pflanze ist ordentlich groß geworden in der letzten Woche.
Likes
5
Share
Papayas from super sativa seeds club are doing great! We have the mommy and different age clones in the room, they are in week 1 flowering now! We did some defoliation and removed some of the lower hanging branches. All good at the moment
Processing
Likes
27
Share
@lMorphine
Follow
In week 8, she has been growing nicely. i think i will stay in Veg stage for 1 week further before turn to 12/12 because i want her to grow a bit more after she was stunned for a while. i also increase a ratio of nutrients for my plant and i think i will increase a bit more on next feed. if anyone has a recommendation feel free to let me know. Thank a million in advance 😁 in front of her i have a Blue Dream clone. i decided to do like a little bonsai in 1 gallon pot and turn to FLO with my Glookies 😍
Likes
15
Share
Eccoci qui!! Tutto perfetto 17g in vaso da 6,5 perfetto!!! Strain 3 è stata tagliata in quanto pronta!!! Ora aspettiamo le altre!! ❤️🔥🌲
Processing
Likes
20
Share
@mikemobes
Follow
7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.
Likes
51
Share
Vamos familia, otra vez de vuelta, y es que vaya como se están poniendo las cookies gelato de royalqueenseeds, parecen caramelos repletos de polen. Variedad híbrida que al parecer tiene floración rápida y si no mirar cómo están con 6 semanas de floración, pronto lavado de raíces. . La humedad esta al 45% la temperatura está entre 21/28 grados , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 1 ml x L Flowering black line , vía radicular. 0,2 ml x L Beta shark, vía radicular. 0.5 gr x L mega PK , vía radicular. 0,8 ml x L Terminator, vía radicular. 0,5 gr x L Engordacogollos, vía radicular. 0,3 ml x L Tucán , vía radicular. 0,1 ml x L Betazyme, vía radicular. 0,3 ml x L Tricoma, vía radicular. 0,05 ml x L Gold Joker, vía radicular. 0,2 ml x L Silver, vía radicular. . Hasta aquí todo familia 🕸️ , un saludo y buenos humos fumetillas💨💨💨.
Likes
8
Share
@Elpicor
Follow
To get higher temperatures I placed the growbox near the radiator, dimmer still at 25%, boiled tap water also this week, this guaranteed me an ideal for the beginning, from now on I will use mountain water which will allow me to use less fertilizer.
Processing
Likes
9
Share
She looks very nice on her first week, developing at a good pace. Let's see how she performs, can't wait to start training her.
Likes
16
Share
Flowering day 34 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The growth has slowly stopped as the full energy goes into the production of the buds. Watering was done twice this week, each time with 1.2 l (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
3
Share
@CheeRz
Follow
Last week the weather was really bad and it rained a lot. According to the weather forecast, it's supposed to rain a lot this week too. Let's hope for the best. ☀️☀️☀️
Likes
8
Share
Week 2 of flower, feeding time. Intake was 1040ppm full dose of nutes, run off was 690,740,780ppm. 5 days between feeding so will do a flush next time.