I'm adding week 2 first, then I'll go back to week 1 and fill in all the details on my set up and strategy. But at this point the CBD Medi Kush is 2 weeks out of the humidity dome. I sprouted these seeds in a paper towel again (even though I swore it off previously) . I started with 3 seeds and all 3 sprouted within 48 hours, transplanted the seeds to soil with the roots sticking out of the shell about 1/2 inch (or 1 cm) then only 2 of the 3 seeds grew out of the soil. Also, I'm growing 2 DinaFem DinaMed CBD plants also from seed and had the EXACT same experience with the 3 DinaMed seeds. I still feel I have the best success rate with putting the seed directly in soil. I'll be planting seeds directly in soil from now on. If I try something else again please slap me 😉 Anyway, since out of the humidity dome both plants are looking great! Nice and bushy looking little seedling. I don't plan on feeding anything for a while and let the plants use up the nutrients in the soil.

hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱

La planta crece rapido, ya se realizo el primer corte apical el proximo paso a va a ser realizar un entrenamiento por LST para empezar a desarrollar hacia los costados para comenzar a desarrollar la superficie del Scrog. Ademas se agrego un ventilador para fomentar el desarrollo del tallo y la fortaleza de ramificaciones. Por otro lado ya se observa que las raices llegaron a la base de la maceta, por ahora va creciendo muy bien esta genetica.

March, 11th. The Nicole Kush Seedlings are growing vigor and nicely I forgot to make Pics of all... But they arte to see in the Video Tomorrow iam going to do that... Iam setting up another " Babytent" with a new Light Stay courious You can have a Sneak -Peak on the new Viparspectra XS-1000, wich is going to be released on March 15th March 13th. Iam done with setting up Now i have another Babytent. and Inside the New Viparspectra XS-1000 and the other Stuff to run the Envoirement I already ca see a difference between both Tents. If you stand outside and just look with Eyesight the Viparspectra seems to be brighter// has another color of Light. I made a Unboxing Video for more informations. Amazon: http://url-9.cn/0y9i Amazon US: https://amzn.to/3e0P2bk Amazon CA: https://amzn.to/3bTnEJC Amazon discount Code: it10mlarimar XS1000 10% it15mlarimar XS1500 5% it20mlarimar XS2000 5% it40mlarimar XS4000 5%

Tag 57 (21. Blütetag) : - 3. Entlaubung, und damit auch die vollständige. Ich mache das ganze in 3 Schritte, weil die Pflanze viel Blattmasse hat. Wenn ich ihr jetzt alles auf einmal nehme, wird sie das stressen Tag 59 : - Gegossen mit 3,5 Liter Düngermischung (1,3 EC 6,4 PH) Tag 61 : - Gegossen mit 3 Liter Düngermischung (1,4 EC 6,3 PH) Tag 63: - Gegossen mit 3,5 Liter Düngermischung (1,3 EC 6,2 PH)

Smell kind of strawberry champagne And sorbet. Super sweet And fruity.definitely 9 week. In week 5-7 start to put some weight on it but in 7-9 still put more and more 3 layer of trellis and they didn’t make it :))) all of them start to fall down. A little problems in veg cuz I was using organic guanokalong than I switched to mills (the best I think in the European market at least) they to great results. I was using them before, I was growing zkittlez than and same shit fucking great results,I definitely recommended mills full line. Try it and see for your self.I hope that post help you in a way other and you make an idea how that strain develops in flower. Oh yah she stretched till week 4-5 so be aware when you put them in flower. For ipm program I use atlantica full line all of them bio extracts and they make it. I was fighting with trips and you all know how hard is to fight with them. Not even 1 sign of trips after a few weeks of atlantica ipm. Anyway I definitely recommend this strain and I will grow again and again alongside with others for sure.

11/16/2020 She's growing, roots are nice and healthy, so time for flowering. Switching to 11-14 and flower dose will start today. Full bucket switch to Grow, Micro, Bloom flower week one Raised level of water to 16 liters just touching mesh pot, she used about 1/2 her water (6liters) And do not want her to go hungry lol

Already flowering, can’t wait 🎆🔮💜

Harvest report for strawberry gorilla. Breaking ground to harvest was 84 days. Wet weight was 241 grams Dry weight =51g Power used for 12 weeks. 246.3Kw used on lighting. £73.89 at £0.30 a Kw Average 2.932 Kw a day =146 Watts power an hour during lights on. Dry weight from this grow. #1 49g #2 37g #3 46g #4 39g #5 51g #6 52g Total 273g True g/W = 273÷146=1.87g/W This was one great grow and there are a few strains I'm really considering running again straight away. I have run this strain twice now and will do again in the future. She has grown decent solid buds absolutely coated in trichomes. One thing I have learnt during this grow is that the idea of cramming 9 autos into my tent was a stupid idea and trialling it with 6 plants was wise.

Ave Maria!

Same old same vege stage

distintos fenotipos se pueden apreciar ya en esta 3era semana!😍 •1g de enhancer x litro de agua aplicación en el riego

Good week, starting to get tons of bud sites. Did a clean up of all the lower branches and foliage to keep my focus on track. Top dressed some nitro bat to help with the small nitrogen deficiency.

Preparing for next week, will face stress)))

*From 11/04 till 18/04 Week 3, 12/04: i've made some topping technique to all those still that didnt and i will watering today, with only water and less quantity than last, also made some little defoliation on underparts The taller are at least 20cm. It suppose to arrive my Lumatek Attis 300w on monday and ill plug it on 12/12h already. Update! 16/04: 2 days a go finally arrived my new Lumatek Attis 300, i've also started with terravega 15ml x 5L the same day i've plugged the new light. i've put the dimmable intensity at 100% 60cm above the top of taller plants. Some a them are still little, but the bigger ones are at least 25cm, so next week gonna be 12h schedule. i've made more defoliation before de light time change and after that i'll make lollipoping when the girls gonna be more larger than now

On day 1 the reservoirs PH is 6.3. The rez is 483 ppm. The girls are looking good and nitrogen toxicity seems to have stopped. On day 2 the reservoirs PH was adjusted from 6.1 to 6.3. The rez is 477 ppm. Trichomes seem to be 10% cloudy so I still have a bit to go i'm thinking 9 weeks should be a good bet! On day 3 the reservoirs PH was adjusted from 6.4 to 6.1. The rez is 500 ppm. On day 4 the reservoirs PH is 6.2. The rez is 503 ppm. I lowered the ppfd so my tallest received 900 ppfd and an average of 543 ppfd. On day 5 the reservoirs PH is 6.2. The rez is 519 ppm. I removed some of the extra fan leaves blocking bud sites. On day 6 I changed out the reservoir with only tap water and adjusted the PH from 6.7 to 6.1 with a ppm of 249. The trichomes are maturing and I plan on harvesting on week 8 day 4 of flower. On day 7 the reservoirs PH was adjusted from 6.5 to 6.0. The rez ppm is 250.

**3RD UPDATE** looks like my work pairs off a little. My babies have grown tremendously. Day 12 and I feel pretty good about how things are going **2ND UPDATE** I ordered smart plug for my outlet where my grow tent is pulling power from. I have my lights automatically turning off for 4 hours everyday from 12-4, while is still in vegatative mode **UPDATE** so, my grow is coming along fine, but I think it could be better. I’m noticing a lot of week 2s from journals of the same strain, and mine looks either a little behind or a lot behind, depending on soil/soilless. I think my light distance has a lot to play with it. I had my light relatively high, almost 2 and a half feet above my plants. I dropped it down to about about 18 inches, as low as possible, while still covering my grow area. If anyone can provide any advice or opinions, it’d be greatly appreciated. I hope this week will be a lot of growth, fingers crossed.** So, it’s officially week 2 of my grow. I’m pretty excited! I have 3 Six Shooters growing....all 3 germinated,,,2 are growing and reaching, 1 is a little behind, though I’m not too concerned about her. They all are growing their 2nd pair of leaves, and I don’t expect much activity this week, although I will still try to update daily. I had a great Saturday, wake n bake sesh...then I took some of you guys advice and went to my local hydroponics/garden store....and realized quickly how much I was spending online vs shopping local. On top of that, I got a nice 30 minute lecture from one of the staff about everything. To my surprise, they start seedlings and small plants there too, aside from basil and your other herbs, if you know what I mean. So they have everything a gardener would need! I was told to transport gradual sizes....basically....like I’m planning to use 3 gallon pots right? But, I can’t go from my seedling container to a 3 pot gallon straight like that. It’s bad for the plant and extremely risky. You’ll have to water that whole pot, but with the seedling or small plant only having so many roots, it would end up basically flooding the plant out. So you move up gradually. I’ll get back to that later. The soil I was using was extremely basic; Lowe’s soil, and vermiculite mix that I blended 2 parts to 1, respectively. It was a good enough medium to sprout my seedlings and get them started, but I knew I needed more. So the guy helping me hooked me up with a 2 cubic feet/15 gallon bag of Fox Farm Happy Frog Potting Soil. I told him I was on a site (ours) where the community is pretty interactive/helpful and how I was concerned about transplanting because of the risks...He shows me this stuff called Myko, which is a root enhancer. He then transplanted a basil seedling to a larger container. Before placing it in the pre-made hole he created, he sprinkled some Myko on the roots AND in the transplanting hole (? I might have made that term up). It promotes root growth and enhances root strength as well, which not only counters transplant shock, but pretty much puts your roots on steroids. I bought a bag of that. When it’s time for flowering, I’ll be using Strawberry Fields potting soil. I went ahead and purchased other containers as well, up to the 3 gallon fabric pots which will be the plants’ final destination. I told him my water feeding schedule, water every day, water/notes on alternating days. He was a fan of it, and suggested that I go a little further and do my days like this: FEED, FEED, WATER, and so on. I purchased Cali-Mag to make sure I have enough calcium going on. I went ahead and got a PH kit as well, to make sure my water and nute days are both within 5.5-6.5 pH. I slick felt like I was in high school science/chemistry all over again lol. I went ahead and bought coated metal flower support wires for LST. He did mention doing “supertopping”, but forgot to show me on a plant. Basically, it’s gently bending the main cola back and forth until you can have it bent in a ways to where you can maneuver it under netting/lattice to allow other cola to get equal/adequate energy and/or growth. I’m paraphrasing this shit, so by all means, correct me. I’m just hoping I can help someone else. I transplanted my plants to GroPro Square 4 x 4 x 3.5 plastic potting containers, and used the Mykos on the roots and soil. I then watered my plants with the water/CaliMag solution, and placed them under the grow lights again. I’ll add pix and vids to my entry shortly.

Primeiro mês de floração, ótimas plantas, super saudável, fertilização ok, folhas com. Um verde bonito, rega e alimentação todos os dias. Plantas satisfeitas.

Well, this was a interesting first journey.... the buds finished drying today, 5 days drying, added pics and vids. Just curing to go.... ah nice buds :) Edit: i forgot to mention i went over the buds when i harvested them, and checked / removed any impurities, like gnats caught in the sticky bud.... picked em clean with tweezers... 👍 Edit: needed to air/dry out the buds abit more, and get some Boveda Humidipak for curing.... it's looking good... i'll update with some pics of trimmed, cured buds 😎 The buds turned out beautiful, pungent, pine, berry, citrusy, daytime, medical..... this has theoretical 1:1 - 21% THC, 19% CBD, so it's not going to give u a knockout high.... its medical grade 1:1 ....... side effects - happy, relaxed. haha :) I weighed it dry and came up with about 123.32g (4.35oz) ... i used abit of guesswork in the weight, not to concerned with weight, as to quality.... (that weight is with the test buds added in, +-15g.) .... you can guess the weight from the pics and vids, haha I really enjoyed growing this.... i found the website by looking up the seeds, decided to start a grow diary, it's my first grow, i made alot of mistakes and growdiaries really helped alot, joined a chat group with some other really good growers. Edit - Day 111 - added vid/pic, Been curing for a week, burp and roll em abit twice a day....... smell and taste nicer each day, 👍 Edit - Day 112 - added good vid of trimmed up test bud, beautiful ...... I hope You enjoyed the Diary..... Good Buds 😎