Processing
Likes
13
Share
Alien Vs Triangle is taking off. I topped, bent and defoliated this week and she loved it, she doubled in size this week! At this pace she might turn out to be my biggest plant. Looking forward to the next few weeks.
Likes
4
Share
Welcome Back!💚 Die fünfte Blütewoche ist nun vorbei und es bilden sich Dichte und kompakte Blüten aus. Diese Woche war es an der Zeit der Pflanze einen PK Komposttee zu verabreichen. Es entwickelt sich ein süßes fruchtiges Aroma, welches sich aber noch nicht auf den beschriebenen Geschmack zuschreiben lässt. Aktuell lässt sich beobachten, dass die Pflanze sich um die Blütenausbildung kümmert. Die Werte im Zelt sind durch den Kälteeinbruch nochmal etwas anders. Aber super im Rahmen: ——————— 🌞 Temp: 22°C 🌚 Temp: 20 °C 💨 RH: 46% VPD: 1,21 kPa 😎PPFD: 830 mqm ——————— Stay Tuned! 💚
Likes
16
Share
Let’s see , humidity is an issue . It’s higher than I’d like it to be . I added drip pans & two different miniature forms of dehumidifiers one electronic and the other passive . I need recommendations on affordable dehumidifiers before I run into mold issues . After breaking the apical dominance there was one or two issues but it gave me all the more admiration for the genetics to take a beating and still remain unbothered & WHOLE . A main top was bound too tightly & broke in half trying to pull itself back up . It remained broken and unnoticed for atleast 3 days before I saw the damage and taped it . She is now almost fully scarred over & healed . Vertical growth was decent this week I wouldn’t describe it as fast or explosive. Still watering to activate the dry amendments I can tell they haven’t began taking it up quite yet. Holy shit do they stink when not premixed into the soil before planting ! Just monitoring & trying to get as much dense continuous resin packed bud stacked up in there .
Likes
10
Share
@MG2009
Follow
10/06/2021 Harvesting #2 and #1 to prevent more loss to mould. #3 will tackle in morning. #2 hardest hit. #1 not much #3 less. Mould Weight will be added later as I have lost my scale in moving. On to curing for 3-4 weeks and I will update the smoke report
Likes
7
Share
@Chubbs
Follow
420 Fastbuds Week 3 Gorilla Cookies Auto What up what up grow fam. This week has been fun as I decided to do a major defoliation taking off all fan leafs. I find it doesn't hurt the plant and it let's the lower branch receive more light. I will probably add a little calmag to my next feeding as I see a few rust spots on a couple leafs. All in all Happy Growing.
Likes
12
Share
Hope you are enjoying this diary it's really been enjoyable & a learning experience. This is why I always run different soils. I from now on will probably be running autos with less soil but using mostly fox farm ocean forest. It's been a blast watching these plants thrive under ac infinity controls. The only thing I can mess up is watering and feeding (easier than you think). I'm also finding autos can deal with less light intensity overall. I hope you are enjoying these diaries please use them as a tool to learn from any mistakes I have made. Check back next week to see just how fast she buds. & remember its 4:20 somewhere!!!!!!
Likes
74
Share
@Ferenc
Follow
Day 59, 17th of November 2021: Well, not much to mention but the most important: Pistils are coming so the flowers are on the way!!!!! Set up is the same nothing has changed: ViparSpectra XS2000 is on full power which is 240W so 100% capacity. Ventilation: 12 hours period when the lamp is on it switches 1 hour on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same approx 50%, temperature as well approx 26-27 Celsius. Fertilization remains the same since last week, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week.
Likes
178
Share
So, with these interesting times and what is becoming a fast evolving global catastrophe. I, myself, along with the rest of you ( I hope ) can take some solace in looking after our gardens, to have some peace away from the news, to give our ladies the best care we are able to provide 🌱 If you ever needed any vindication or validation as to why growing your own is best. More than half the world currently in lockdown, and with MJ in short supply, our actions speak for themselves! Anyway, back to this diary. I done a lot of work on the room, invested a lot and tried to make everything as automated as possible. Everything runs on smart plugs, the hydroponic system is DIY and is RDWC which is cooled with a Hailea 150a. 6 plants is what I am going for this time, with a shorter veg length compared to the last grow. I prefer to wait until they show their sex, but if they don’t by week 5, I plan on flipping anyway all being well. I am using 730nm LED’s that come on 15 mins before lights on, turn off during lights on, and then they come back on when lights go out, and stay on for 15 mins. This should enable me to run 13/11 during flower with little risk. I am also going to add a UVB fixture to my custom rig which will only be used during the final 2 weeks of flower. I have 3 Alibaba lights attached to a custom rig, they really are awesome lights. I tested the room out with an Apogee SQ-520 par meter (PAR map in pics). I have dimmed them down, so PAR is around 500 across the whole canopy, this will be increased to 1000 once they’re flipped. I vent from my house, to the room and then outside, this increases the CO2 in the room, which I think helped the yields on the last grow, generally CO2 hovers between 470 and 700 PPM. My ladies look a little sick, but tbh, I struggle starting out in Rockwool, and things usually correct themselves within a couple weeks. With the quarantine I have struggled to pick up a humidifier that is capable of maintaining that room, so it has been all over the place since the start. I have opted to go with Royal Gorilla this cycle, let’s see if it’s as potent as RQS says that it is! Good luck all and take care...
Likes
11
Share
SPREADSHEET: Jack's vs. Advanced: https://docs.google.com/spreadsheets/d/1HtHnZOxMHtBK5DFQjpBun2lbhDxYVhI7lJaq4W6xbyk/edit?usp=sharing 10/5 - Day 44: Things are good. Trellis netting is working and I'm spreading the canopy pretty well. We'll see what happens! I would recommended against the actual net I purchased, this shit is bulky, big and too stretchy.
Likes
13
Share
@Growador
Follow
How’s growing everyone, just to let you know that nothing new happened, the babies are in a fantastic shape. One of them is nearly ready so i will begin to flush it a bit. Otherwise, all is great, no defficiencies so i'm very happy. I hope you are all well in this terrific moment. The second wave is coming and i just hope we can all get well and do our crops. Have a nice day and a great weekend
Likes
23
Share
@Growshh
Follow
The girls are happy! Pistils are long and the calayxs are developing nicely. Starting to stack and swell! Kinda turned into a jungle since the defoliation and now it's so much leaves...I removed a dozen or so but I dont like defoliating at this stage so I just tucked them to expose more light. Some unexpected stretch from the watermelon wedding cake and zkittlez. Really happy with this one!
Likes
9
Share
Cut the plants down on the 24th of April, drying room levels are 72°F and around 60%RH, I'm currently on Day #14 of drying and the buds don't feel fully dry yet, the main tops feel crunchy and dry but the lower smaller buds are still quite moist and smell like chlorophyll, I think I may harvest the main tops so I don't overdry and leave the rest in the tent for another few days, either that or put the rest of the buds in a brown paper bag to finish drying. Finished dry trimming the plant ended up with 200 grams dry weight not including trim there's another 2 ounces of trim which if you want to include that would bring the total weight from this 250W LED to 256 grams. I'm super happy with the result of this especially for my first grow and from one autoflower, it can only get better from here on out. FYI Not sure why I can't edit the lights I used but the bloomgro 600W LED is PULLING AN ACTUAL 250W FROM THE WALL so the gram/watt should be .8g/W
Likes
24
Share
@Momentum
Follow
Bei der Hash Burger ist mir klar geworden, dass der Leafly Strain of the Year Titel sich nur auf das Endprodukt bezieht. Vom Growing her performt sie eher klein und graziös, wird sicher aromatisch und ist ne schöne Pflanze, aber der Wuchs ist nicht die erwartete Bombe bis jetzt.
Likes
8
Share
1° Semana- Aeroponía - Crecimiento lento, pero luego mejorando las condiciones de crecimiento para las raíces, ya que al inicio la luz traspasaba a través de la arlita y la tapa del tarro, afectando el crecimiento, por lo que en el día 4 se realiza el pintado con pintura para evitar el crecimiento de patógenos. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1st Week- Aeroponics - Slow growth, but then improving the growth conditions for the roots, since at the beginning the light passed through the clay and the lid of the bucket, affecting growth, so on day 4 I painted it to prevent the growth of pathogens.