Recommended
Processing
Likes
Comments
Share
First days of flowering this week, I promised myself to be hands off this week... Journal reads: 1/13: Fed these Girls! 3 TSP/GA Big Bloom 2TSP/Ga Grow big and Tiger Bloom 1/2 tsp Clean Kelp. Plant 1 looking stressed. Hands off! 1/15: Removed Netting, added fan, restarted time lapse it had failed last week ~ 10 days 1/17: I trimmed dead and suckers from all plants, fed with 3 TSP/GA Big Bloom 2TSP/Ga Grow big and Tiger Bloom 1/2 tsp Clean Kelp. Trimmed a lot!
Likes
18
Share
Things are getting good now.i haven't had any issues this week.i p.h my water and feeding at 6.4.i did a little flush to get rid of any build up there might be in my soil .I did feed this week with advanced connessiour bloom a and b one time with some b52.
Likes
34
Share
@rhodes68
Follow
Wow love this strain, second grow of it and we should have flipped at 24 inches as stretch is only a bit over 100% and they could have used a few inches. Great colors as she finished buds as hard as rocks even before the dry. Very Frosty though not as much as the FF-11. Expect we will be pleased after dry given how dense those buds are, will watch close in dry. Strong easy grow folks worth getting
Likes
13
Share
Regando solo con agua ya 2 semanas, sin necesidad de lavado el cultivo probiotico me lo permite las flores ya están maduran y se nota una densidad enorme en las special queen y en las green gelato de royal queen seeds
Likes
42
Share
Week 11 - both ladies look amazing can't wait for the smoke. 9L Pot she is almost ready to harvest so I on next watering she will receive the final part for 7 days then flush and water for 3 days. 12L Pot she look amazing a lot of buds and she have 2 weeks left till harvest
Likes
18
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 47 since time change to 12/12 h. Hey everyone 😃. The lady looks beautiful 😍. The buds get thicker and thicker 👍. They smell incredibly delicious 😬. It was poured twice with 1.4 l. The tent was cleaned and the humidifier refilled. I wish you a lot of fun and all the best 👍 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
42
Share
Day 21, These 3 are a pain in the 🍑 i know why they look like they do🤦‍♂️🏻 (K) but i just don't get it. I'm already pushing these 3 to EC 1.8 but they just keep hungry🤷 I'm gonna switch to Greenhouse powderfeeding for a little while to get them a higher dose of K. Hope this solves the issue. Rock on Growmies 🌱
Likes
6
Share
Hello dear readers! I’m in a hurry to share the results :) 26.02 was added to bio protect 0.5l over the leaf. The leaves of the plant were carefully spray at night from all sides.😋 27.02. It was decided to produce the crop topping. After topping immediately poured solution with fertilizer. And T.A. Fulvic was added to the general fertilizer. The flight is normal!💪 Isn’t it a little early for a topping? This week I plan to hang the lamp on 600W MH and water 1part on 2days per liter. Maybe add calmag. Water under the filter with the initial value of 130ppm. The week watered with 340ppm. I think to increase to 500ppm.😉
Likes
4
Share
@Mo_Powers
Follow
there's not much to tell, the sun shines almost every day, sometimes over 25 degrees during the day. which of course she likes. the autopot system also works well.
Likes
8
Share
ppfd is up to 900-1000 pretty much all these amazon lights can offer. vpd about 1.3
Likes
1
Share
WEEK 17-23 March. She's really too narrow now, I'm going to transfer her in a larger space very soon. In the meantimeI'm continuing with all the techniques to make her stay down.
Likes
93
Share
@Roberts
Follow
Auto Opium is bulking, and filling in. She is starting to get a aroma going good. She should finish up in 2 to 3 weeks. Everything is going okay. I plan to sterilize the room once it is clear. Nothing more to report at the moment. Thank you Medic Grow, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
12
Share
@GYOweed
Follow
Raised lights a bits. 2 seeds one 2 gal pot in a 2 gal bucket. Same structure 2 very different smells one turns color. It's tricks for your fucking mind! Left one is very sweet smell. Right one that is turning darker is very rotten skunky. Gavem a prune job cause the lower buds all bleached lookin and need a tan.
Processing
Likes
7
Share
Really happy with the weeks progress. Not much difference so far between the 6 NFT and the 2 in All Mix.
Likes
6
Share
@pzwags420
Follow
On week 7 she is still putting out a lot of new pistils. Colas are fattening up but still have a few more weeks to go. The smell is sweet and fruity so far but its still early as trichs are still developing. Her top colas got a little too close to the lights and may be fox tailing or shes just more sativa of a pheno either way shes making some long colas and Im happy about that :)
Likes
14
Share
Already chopped a few more mature nugs off. Looks good.
Likes
50
Share
Room setup rundown, examples of bud, et al in pictures... Seedlings/Clones lights - Viparspectra XS1500. Vege lights - Mars Hydro FC-4800 Flower Lights - 650w 3400K 1900umol/s PAR, (3) 226w DIY 2900K 630umol/s PAR (678w and 1890umol/s), Substrate - 50/50 sphagnum peat moss and vermiculite in 5-gallon pots Climate Control - Luckily, the lights, winter and normal furnace use all equate to a decent temperature, though a bit on colder side in in vege phase, sadly. Humidifier is needed early and later a dehumidifier is needed when canopy develops. I only grow in the winter months. Irrigation - do not use the emitters in this diary. They suck a big fat dick to skip a line to suck a bigger dick. Use the pressure compensating type. https://growdiaries.com/diaries/232811-strawberry-cookies-og-r1-cherry-diesel-bbgs-ego-epg-ebg-grow-journal-by-001100010010011110/week/1366923 -- use something similar to those. They come in different shapes, too. Basic process The little light takes care of seedlings in 2.5" wide seedling pots until first up-pot. The 1-gallon pots fit well under the FC4800 in a 4x4 tent until day 21 after sprout. I plant 150% or more of what i need, so i can kill the weak without concern. The goal is for every plant that makes it to the 5-gallon up-pot being capable of producing a minimum of 160 grams with a maximum of a 35-40 day vegetative phase. Third up-pot is into 5-gallon nursery pots and now under the 3 DIY lights and the 650W light in the big tent for a couple more weeks of vege. An irrigation system in the big tent saves a lot of time. One scrog for training and another for support, just in case. Reverting back to a more systematic approach to canopy composition moving forward. About 2.3 colas per sq ft and 8 primary colas per plant. Yields were similar when over-crowding and being less systematic, but the proportion of less dense nugs is greater and trim time is needlessly elevated because of that fact. I was very controlling about this the first couple years but got away from it for far too long at this point. Drying / Curing - Into mesh racks for 9 days. I wet trim and cut down to similarly sized buds for even drying. Temps are controlled around 68F and RH is set to 60%. Then into some 5-gallon buckets with gamma seal lids and (3) 2-way 67g boveda humidipaks (58% or 62%) in each bucket - 1 at bottom, 2 at top. Temp/RH probe confirms that they hold the RH steady at 60-63%. Cost - 0.33 cents (USD) per gram produced. This includes an accelerated depreciation expense for all equipment used, fertilizer, water, electricity for all equipment used, new filters and other yearly purchases - bti, ph strips, sticky traps, etc. I'm a finance guy, so these numbers are comprehensively accurate and purposely err slightly on high side of cost. The only facet not included is the cost of my labor.
Processing
Likes
10
Share
I have bought 400W 3050k 41000 ceramic metal halide (Best Than hps Hps 56000lm for human eye Cmh’s 41000 lm in par range
Likes
21
Share
@Rollex420
Follow
This week flushing the wedding cake i thought that was the problem was an excess of nutrients, but instead the water was quite clean, around 1100ppm at the first drain, after several flushes water is now on 600ppm.. It seems that the others are starting to have the same deficiency that hit wedding # 2 .. now I'm treating them with 0.5ml of cal-mag adding it to the other nutrients for once a week (except wedding # 2) I will wait for the soil to dry out, to give her only clean water since the final harvest is not long. ⚠️ UPDATE DAY 45 ⚠️ Yesterday flush for dos si dos and today flush for (wedding cake 1) they are having a nutrient lockout too..😪 The (wedding cake 1) is clearly healthier than her sister (wedding cake 2) by looking at her color, but unfortunately she had excessive PPM / EC too.. So i did the same procedure by using only tap water, but this time added only 0,5ml of cal-mag. Water was at 6.5 ph until I got a better runoff, it went from 5.7 to 6.0 PH and from 1800 to 700-600ppm 😬 I have never thought of overdoing nutrients so much.. I will certainly learn a lot from these mistakes 🙌🏻