7/6 Lion Claw is growing like crazy. I've been really impressed with this strain so far. Both plants just started showing sex, and they both ended up being females! Top Dressed both Lion Claw plants to ensure they have plenty of fuel for flowering. 7/7 17" tall this morning. Such a vigorous monster.

HOLY SMOKES!! Y’all seeing this?? Look how fast they are growing!! Wow 🤩 I’m so impressed both with the light and the superponics!! The light is giving perfect node spacing and the superponics is speeding up the growth 💯.. so what I been doing is 4 days lotus nutrients than I empty out the res and add hygrozymes and hyclean. Both by the same compmany! Both helps with salt build up and cleaning the roots/res… Plz follow my YouTube channel (Familytrees19)

ALMOST TIME. TOOK A PEEK AT THE GERMINATING SEEDS AND SOME ARE POPPING OPEN. PROBABLY TOMORROW APRIL 23RD I WILL START PUTTING SOME IN THE SOIL👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

LOW STRESS TRAINING - try it it works on almost any strain ,keeps plant height controlled,bushy and promotes more shoots exposed to light. Another good advise : monitor your plant everyday and watch closely under leaves for any small bugs,as long as you monitor and its in small scales - no problem to control best thing to do is gently and patiently squeeze 'em between fingers ,not harming the leaves. very effective against spreading ,aphids,mites,thrips. also, using natural neem oil 1% mixed in 6ph water - spraying (only vegging - NOT IN BLOOM PHASE) on leaves and bottom every 3 days during after-sun hours. - organic solution for this problem as well - neem oil stops the bugs from reproducing and slow them up

Topped today and getting ready for transplant to 5 gallon pots. Two weeks under new Mars Hydro 3000 and new AC infinity fan. The four plants are listed above, enjoy the video, my first!

Week 3(Bloom): She has packed on a lot of pistils this week. Overall she’s looking really good. I think I’m under watering her. Last night and tonight when the light came on she looked pretty droopy. I’ve given her some more water today. Tomorrow when the light comes on I’ll give her a look and see. I did lift the plant to see if it was heavy or light, she was very light. Hopefully she snaps out of it. I’m very happy with this girl. This week the growth wasn’t as rapid, this could be because of not enough water, not sure though. Starting to see a bit more vertical growth Thanks for checking out the diary! 👊

Chopped on Day 70 (September 6th, 2020) 9/6/20: Hung her to dry after taking off most of her fan leaves. I decided to hang the whole plant this time around to see if it helps my dry quality. Will update with pictures soon. 9/12/20: Trimmed her up today after feeling that the nugs were crispy and dry. First couple days of dry we were experiencing a bit of a heat wave and high humidity levels (fluctuating from 60-75%). During the final days of drying we had rain and then it cooled off and dried out lowering my rh in the tent to around 50%. That crisped the nugs right up in 2 days and I decided it was time to pull her out and trim her up. The nugs were so incredibly sticky and smelled of chem. They are really dense despite their look especially the main cola nugs. Still smelling a bit like hay but I'm confident that the curing process will take care of that. I am curing with Boveda 58% rh packs in each jar and a hydrometer as well. Not going to test a nug until at least a week or two of curing or until I run out of Sour Crack lol. Will update with a smoke report. 9/28/20: So it's been just over 2 weeks of curing so far. When I first put the nugs in the jar, I was worried they were a bit too dry/crispy for what I was hoping for, but after 2 weeks of curing the nugs aren't as crackly sounding in my hands. I cured with Boveda 58% rh packs and mason jars as seen in the pictures. **SMOKE REPORT** 9/28/20 - 2 weeks of curing: The smell of this strain is a really unique one, or maybe the pheno that I got is. It smells fruity for sure but it has this gas smell to it that almost smells chemical but in a good way. I marked down tropical above because the combo of pungent fruit almost brings out a sweet cocktail aroma. After really thinking about it, I've never smelled weed with a scent quite like this one! The smoke was smooth in my freshly cleaned bong and I'm decently high. I feel pretty tired but I'm ready to do something like game or make music. I don't feel hungry (yet) but my throat is begging for a drink. I'm happy that I have now smoked my own home grown weed twice!

A new plant was born, thanks to the seeds of Sweet Seeds, I hope the best girl will grow up

This week went ok, but I did break two of the four tops early in the week. They have both recovered but it slowed me down a few days. I got the final four toppings done today on day 49, so I will probably give them two or three weeks and see where they're at, and hopefully be about ready to flip to flower. Not much left to do from here, just a little LST on the 8 tops to spread them out, and then just sit back and watch them grow. Thanks for stopping by, be safe and Blaze On!

Everything is going smoothly, the buds are getting bigger day by day All the girls are bug free, they are still looking green The G13 has the strongest smell followed by the Runtz and the GDP doesn’t smell like anything for now

01 December 2020 Do-Si-Wine This lady is just getting frostier by the week and looks really beautiful, very white frosty thcA and orange hairs coming out. The nugs are getting a lot thicker as-well giving more of smell off which smells very nice btw. Did some more defoliation on this lady and light penetration is a lot more efficient as well Sunset Sherbet Week by week the nugs are just getting thicker and more frosty. Throughout the week I did some nice defoliation on this lady to expose light to the lower bud sites to ensure that the nugs will yield a bit better. Thickest mug so far is 4cm in width and is 6,5cm in height and smells absolutely dank🔥 In general this lady is doing very well and smells very potent to the touch, I’m just waiting to see this strain turn purple as the genetic is. Another 4 - 5 weeks left until harvest.

Flipping now, light training trying to maximize horizontal space

Did a lil experiment and clip the top of each was looking to see a increase veg

Fotos Day 71

Week 8 has gone well and she is chugging along. She is still putting out new pistils with some turning orange. Calyx's are growing longer and buds are still soft. I'm thinking a min of 10 weeks flowering for her. I removed some leaves on inner canopy to bring some air and light deeper. She is so bushy its hard to even defoliate maybe next time i will remove some more lateral branches... afterremoving the leaves I must have come incontact with a pollen sack as where I defoliated all seemed to be polinated over night and are making seeds :( I will cut my losses and harvest while seeds are still small.

The girls have all shown sex now and are starting to smell dank, smell definitely leans more towards the OG Kush side; and judging by the fat fans leaves I’d say the grow more towards that side too

Day 43 let's start week 7! the plants grow and continue to stretch. unfortunately two weeks ago my ph meter broke. last week I started giving 1ml / l of green sensation and the plants seem to have lightened a lot. these days i should have the ph meter back so i can check. all in all they seem to grow well apart from this "yellowing". Day 44 the pH pen arrived and I discovered the cause of the yellowing. the ph was about 5 😭😭😭 now I let it dry well and brought the ph back to 6.7 and given 0.5 l and I wait for it to dry again keep following me to see my progress. it is my first growth and I make many mistakes, leave a like and give me an opinion or advice to improve. good luck and happy day!🌱💚