Likes
Comments
Share
We planted a second Jack Herer Auto from Quebec Cannabis Seeds in a 1 gallon pot as an experiment to see how it does compared to our jack herer auto in the 3 gallon pot. We wanted to see which plant would give us the best yield for the space available. This will help us decide how we want to do our next few rounds of grows and if we want a SOG or just have a few big plants in the tent.
Likes
35
Share
Day 64 Okay so we're entering the last couple weeks things are looking good I've managed to bring the ppm's down I added three of just straight tap water waited 10 minutes and then added my 2 L of nutrients. Doing this for the last couple days has managed to bring my ppm's down a very large amount now it sits at 1973 PPM I am well on my way Day 66 not much to say just checking the trichomes and she is coming along well this my be the last week for her then on to flushing. PPM now 1836 and the solution is 1668 PPM so i'm doing good now Day 67 i'm happy to say that my ppm run off is now the same as the solution i'm putting in and that's a big win so now in going back to 2L of water then 2L of nute's Day 68 she is holding steady at 1550 ppm i now know the watering that works best more knowledge for the arsenal lol Day 69 not much to say. She is putting on weight fast now that i got the ppm's under control but at this point it may be a week 17 harvest as trichome development is still on the slow side ppm 1763 Day 70 by my estimation she had suffered a minor nute lock out that slowed growth a little bit. T he reason i think this is because now that i have the ppm's in check and at a steady 1550-1620 ppm she is ( for lack of a better word ) exploding with growth in bud size. some new growth has doubled in size in just 24 hrs and that's huge, because of this i'm going to keep her in flower for week 16 and how knows maybe 17 before flush..... side note i had a freak problem with my one Aglex light and the veg side of the light along with some bloom light diodes stopped working. with some help i found out it was 2 LED diodes were drawing on the power and in effect stopped half the light from working we bypassed the bad LED's and we are back in business 😀
Likes
2
Share
IIt’s been a little over a week now, and the buds have slowed down their fattening phase. There is still some growth, but I think ripening has begun. After examining the buds and trichomes thoroughly, I’m seeing mostly cloudy heads, so harvest can’t be far away. When I open the tent, my whole room smells sweet and citrusy. All the plants look perfectly healthy, with only slight signs of light stress—even after reducing the PPFD from 1000–1100 during peak flowering down to around 800 for the last 2–3 weeks. It might just be because the plants are now fully in “fall mode.” Right after harvesting, I’m going to take some macro shots of the nicest top buds. Kings Kush: The terpene profile has stayed consistent compared to last week, but I’m picking up stronger grape or berry aromas now. The buds are huge. Blue Dream: Pure gas with a hint of sweetness. About 80% of the pistils are now a nice orange, but the trichomes are only around 50% milky. It might take a week or two longer than the other plants. Mimozz: Sharp calyxes, frosty leaves, and crazy fruity aromas. I’d say this strain is the closest to harvest and lives up to the predicted flowering time of 7–8 weeks. I really wish I had taken a cutting to preserve this beautiful phenotype. Coco Fresh: The buds are still getting bigger, and even the lowest ones are turning purple and fat. It’s by far the prettiest plant of them all. The flowers smell super pleasant, with a mix of gassy cream and ripe fruit. I can’t wait to harvest them!👽😎
Processing
Likes
11
Share
@kcartel
Follow
growing rapidly, next week I plan to add fertilizers, at the current stage the plant has gone through LST and topping and pruning large fan leaves, in my opinion this stress did not affect the growth this is my first experience in the style of Maine Lining, waiting for 4 week!
Likes
15
Share
@Siriuz
Follow
Check out the videos guys, she is flowering real good even tho we are not using any special nute like big bud for example, but i really want to try it soon, hopefully! Still she is doing great and im happy to have her! How are you doing growers whats up!? Dont forget to leave a comment Any suggestion is welcome! We are happy to learn new things alwas, Thanks for the support happy growing everybody Enjoy the footage thanks to Siriuz
Likes
14
Share
Day 1 of week 3 flower loads of small buds everywhere will be finishing flower burst feed end of this week then starting the pk9-18 should start seeing some big buds on there soon. Starting to smell decent and seeing loads of growth on the buds everyday!
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
10
Share
Aptus 1er utilisation de la game, très concentré.
Likes
3
Share
Es ist ist richtig kalt in der Garage ... die oberen Blätter sind immer noch hell - für mich aber kein kein unnötig zu düngen - die Aufnahme ist durch die niedrigen Temperaturen einfach nur gehemmt.
Likes
48
Share
@Rangaku
Follow
On the wind down now , 1 more little feed then flush . She looks happy having the tent to herself .
Likes
3
Share
Likes
Comments
Share
@Ogchemst
Follow
Day 1 of flo, description in OG Kush Diary, I'm really curious about this bush. I think I will taste great from what people told me it'd been really good for making some wax also, I like how I managed that canacopy I know I can do better but it's my first time trying this actually... I'm kinda beating myself up because I wanted a bit longer branching but next time I think I will try doing this with all 4 of my plants just because I like how it looks Day 3: sorry to see that beautiful bushy structure having to come off, I enjoyed looking at it but time to give those bigger buds some space and give the plant some energy to the top so I'm removing all unnecessary small little branching to increase the airflow etc.. I enjoy working on my plants. Day 4: flo so I managed to get rid of most of the bush and alot more of the plant has opened up, I removed mostly smaller branches and let the bigger ones stay just to see how I can further improve this In future and what to look for. I could watch all the videos I want but without a 1st hand experience it's always just a theory , there's always room for improvement every grow in my opinion. 8 Feburary Update: I flushed all 3 with some water and fed 10ml of each a and b + additives they responded very well soon on day 7 I'm planning to start giving them more bloom nutrients after flushing the medium just a little once more so I can really push it and make sure my ppm is high enough without too much salt buildup, for that I will be using cal mag water followed up by final dose of grow a + B with some big bud I'm trying to avoid that saltbuildup at all costs here as this is my first grow in 7 Years here in Germany 🇩🇪😁, btw the water quality here is so much better than in Ireland... I gotta be careful with pests alot living on the bottom floor, thing is a nightmare...
Likes
8
Share
@Merulix
Follow
The drain-EC was too high / EC 3.2, Lower leaves started curling and dropping. i had to flush a bit.
Likes
218
Share
@DevilsBud
Follow
Week 3 of Flowering is here Very excited to start the next week And see the buds Sites expand 👀 Day 15 Critical For weeks I have bin watering when come home and turn lights on . But because I had issues with humidity . I started giving them water in morning when go to work and shut the light off. And i think that worked well . They are looking good and growing nice there some higher buds so it not a even feeld but this my first grow ever . So i am already happy how it is going 🤘🏻🤘🏻 Day 16 Critical FRUIT FLIES !!!! i saw that dam bastards last night so ordered me some fly repellent sticky what ever you call those from Amazon hope they catch them all . Plants are doing fine in my 👀 . I am not giving them water now but in the morning when the lights go out and i go to work . That's all folks Day 17 Critical Did nothing to them only gave them the required nutrients in the morning. Day 18 Cookies Gelato Left them alone today having some personal issues off my own . That makes difficult to work on the plants hopefully tomorrow will be better Day 19 Critical I measured plants today and there about 90 to 95 cm from soil to top. Slitlly getting worried again about hight they are. I hope the grow spurt is over and bud formation will be intensifying . I think if i didn't use any technieks that i would be sol right now . Hope for the best Day 20 Critical Did something stupid today i left the light on for 18 hours and was afraid i fryed them . But luckily nothing dramatic happened . Not hopefully i didn't do much stress on them . I gave all the plants 1L of water pH 6.5 . And start letting them dry out some . Day 21 Critical Last day of week 3 Flowering This week went fast had couple mistake of my own . But luckily my reliable @MarsHydro TS-1000 save me from a catastrophe . I absolutely love the quality that this lamp brings and i am Glad this model has a dimmer . With the baby's is going well nothing going on but goodness
Likes
4
Share
Hello everyone, These girls are doing good, getting bushier and they have a way better smell than last year, Im waiting till the pistles get longer so I can take one and cross breed her for next season, lets see how it goes... See you guys next week🤘🤘👊👊👊
Likes
4
Share
Another week of slow growth has gone by, thought I end it with another round of topping on one of the plants. I'm looking to make up for the previous grow where I didn't top at all and it produced so little, hope I don't go overboard with things :D
Likes
11
Share
@goeser
Follow
More details and photos are coming when all buds are dried in about 6-7 days00
Likes
11
Share
We ain’t messing over here, new to the grow diary, so will be keeping track of all my things from the start… but for now check this one we harvested last month what a yield 💜🥊 Finessed
Likes
6
Share
@Ninjabuds
Follow
Just like the other strain from weedseedsexpress.com there starting really strong pushing the shell off without any help. Also they have some purple hue to then already always a good
Likes
73
Share
@Roberts
Follow
Cookies and cream auto is growing great. She is just finishing bulking and has about 10 days left roughly. I will be switching her to ph water this weekend so in 2 days. She has grown great under the Medic Grow Mini Sun-2 light. Next update is harvesting. Thank you Medic Grow, and MSNL Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g