Everything went well, make sure to keep prefilters clean on water lines, doh.

Buds are stacking! Terps are really coming in now, smell has switch to massive fruit! Moved fan to the floor to blow upwards on the plants to prevent the buds from shaking around too much now that they are covered with trichromes. At this point I’m am mostly concerned with humid management and air flow to prevent mild as these big buds fill out. This was the last week of feed, next res will be be close to pure h2o for a week and pure h2o for the final week. Wean the plants off the nutes. Ph adjusted to 6.3 now too to better facilitate late flower needs

Week 2 has gone just as well as I'd like it too! I had an accident during the week where I had dropped a sticky bug trap on one of my girls, this led to me accidentally ripping off a fan leaf and a half, but she seems to have come out of it just fine! (Thankfully). I have been feeding 1/3 strength nutes the past few feeds, stepping it up from 1/4. I will be watering until I see runoff from now on to prevent nutrients from building up in the coco. Update(day 15, 4/12/20) Today I purchased a new oscillating fan, co2 bags and a new hygrometer that hooks up to my phone and shows me stats. The girls have been putting in a lot of work over the past 24 hours. I also had a Purple Punch photo seed sprout today which I may be turning into a mother plant. I will be starting a diary for this girl too. Update (Day 16 5/12/20) Second purple punch photo popped today, going to keep 1 inside and give the other to my mom to take care of. The girls got their first 1/4 dose of calmag today fed at 6ph due to all the nutrients settling there.( I do have ph +/- but I'm going to try run this whole grow at 5.8-6.2. Update (Day 17 6/12/20) Plants seem happy today. Fan leaves producing a the pre-existing nodes are starting to shoot out quite rapidly. Unfortunately, my streets power went out today for ~90 minutes, I opened the tent, windows and doors to get any light in I could, thankfully the power came back on shortly after. I fed the girls today with very little run-off(I'm trying to perfect the amount of water they need). Update (Day 18 7/12/20) The girls have jumped up over night! I wont be feeding today as I'd like the coco to dry out quite a bit more. Update (Day 19 8/12/20 Gave the girls a small feed today with very little run-off Everything seems to be going well so far, I'm very thankful! Update (day 20 9/12/20) Everything is going pretty well today. I will not be feeding as the increased humidity has kept the coco more moist than usual. Will be feeding full strength nutes tomorrow! Thanks for stopping by, HMU with any questions or tips you have.

Day 58 of flower. Breeder suggestions 56-60. I don't think it'll be ready to harvest. No amber trichomes at all yet, until I see some I won't cut.

she actually went for just about 10 whole weeks of flower. I’m chopping her at 69 days, as I write this, but I will post relevant photos in a harvest update after it’s dried and weighed. I watered with only distilled since the last update, and starved her of water and RH in hopes of increasing last minute the resin and trichomes production. Flushed with more distilled and after a few more days turned the lights off for two days of darkness. The next update will have the result.

Both plants are completely different but smoothie car # 2 hard sprinkled with buds with a sweet fruity scent, # 2 is rather earthy strong .. Both very interesting.

Howdy howdy howdy, What's good peeps!? Iv got some spare time these days so I figured I'd document my fun farm for anyone that wants to follow along 🤷‍♂️😎 Week 1 is nothing special. Took 8 trainwreck clones 6 days ago from 2 separate mums that are about to be flipped to 12/12 (4 from each). After 6 days they still look perfect so I'm hopeful all 8 will root nicely🤞🏻 Nothing special in how I took the clones. Cut, scrape, clonex dip then straight into tiny rock wool cubes. I'm a cheap cunt so I'm using 1l bottles as humidity domes, they work fantastically if you are wondering 😎👌🏻 You can see in the video the 2 mums they came from. I won't be doing a diary on them but I'll probably post pics of them here n there if people want to see how they are going 🤷‍♂️ Anyway, that's about all there is to say about it all atm. Tune in every Friday for my fun farm updates Or stop by the NO.1 cannabis channel on SENSE.CHAT 💚💚CannaChat💚💚 for some more dopey content by yours truly Double_oh 😁✌️🏻💚

* 3rd December - Day 14 from seed * Well, what a week! And I wasn't even here to enjoy it. My partner lovingly tended Nora (we decided to name her) while I was away. Looking at 'germination week', you'll see I was constantly aerating the nutrient solution. For the first 4 days, my partner was pH adjusting the solution (Rhizotonic seems to leave pH constantly climbing - around half a point per day), pouring out any old solution from Nora's 'semi-kratky' pot, then syringing 24ml of solution through the rockwool. As soon as the tap root was around half way down the pot (4th day), we filled the pot so the tap root was just touching a well of nutrient solution within the pot. Each day, the solution was emptied and refreshed - not taking any Pythium chances here. Within the next 3 days the rest of the explosive root growth came bursting through the rockwool. So, time to transport her. Made some changes to the bucket: lots of holes in the rim for LST, full foil-bubble insulation (including around the rim of the net pot , and aluminium tape around the entire silicone air line - zero light leaks), a very large new air stone, and a 25w pump to power it. The pump is ridiculously quiet - not 'quiet for 25w', simply ridiculously quiet. And as you can see, it creates a bucket which looks like a pot on full boil. There's absolutely no way pythium is getting any sort of foothold on this grow. The root explosion made it very easy to position the rockwool cube within the hydroton - the roots are submerged while the rockwool sits just above. Decided to stick with the Formulex as it's doing a grand job, albeit the dose has been kicked up. Swapping the Rhizotonic for Regenaroot as I hear very good things, including that pH remains stable! Will now use Rhizo for foliar applications only.

Hey everyone 👋 Back again for a week 2 update. Still not much to report really. The clones all seem to be rooting nicely. A few are yellowing on the leaves. But that's to be expected with very little nutes given to them. (very very small amount to avoid stress or nute burn) Other than the few yellow leaves they are all still very perky looking so that's a definite positive. All in all things are looking on track 👌🏻 If any pros ever see me doing dumb shit with my grow feel free to point it out and give any advice. Any feedback is great. Always room to learn right!? Oh, and the music over the vid is me. I was bored last week and recorded for the first time in yrs. Figured my vids could use some original music over them 😂. Sorry if it's painful to listen to 🤣🤣 As always, I'll see U all next week ✌️🏻&💚 From the CannaChat team. SenseChats NO.1 cannabis channel Double_oh

Couldn't wait for new pots to be delivered so I used a couple old ones I had and improvised with the other 3 and made some from instant noodle pots 😋 I vacuumed and disinfected every inch of the tent today before I put the little ladies in there, I have to say it is much brighter now...didn't realise how dusty things could get! Hopefully removed all traces of pollen. I'll mist/spray these regularly with water as a precaution.

----------- Week 6: ----------- Start of the 2nd week of real flowering. The slight discoloration of the lower leaves continues. Not the biggest problem in itself, but would have liked to see it differently. Her general health is good, but next time I will opt to use a biotab less. 2 pieces seem more than enough. That is why I waited an extra 10 days to give her the one-off treatment of bactrex and orgatrex. It is a solution of 1gr bactrex and 20ml orgatrex in 500ml water to boost bacterial life. She has just received this and she will only get this once. We also set up the dehumidifier to keep the humidity around 50-55%. And we have now also switched on the digital lumatek boost, for maximum light intensity. Since we also don't work with a scrog net (which we really have to consider next time), I already had to tie her in a few places to make sure her shoots do not fall over. But this is a positive 'problem'. Until next update!

como decia antes voy subir todo q tengo desde entones solo rege con agua nada mas. el resto lo dice la planta por si sola, todo fue una locura la humedad demasiado alta, las lluvias y el invierno q estaba ya encima complicaba las cosas. pero al final todo resulto con los resultados esperados

During the first period of flowering they seemed a little bit slowed down..Now they're starting to swell pretty good! :D Atami products work very well!

During the first period of flowering they seemed a little bit slowed down..Now they're starting to swell pretty good! :D Atami products work very well!