The Grow Awards 2026 🏆
Likes
Comments
Share
Since my last grow i have a problem with powdery mildew... So on veg. i just spray Sulfur and worked fine... (the smell is terrible....) now i am in flower and found the mildew again... i try a new mixture: dry common horsetail 1 onion 1 garlic cook that for around 1 hour. Then i flux it 1:5 with water. The smell is not so bad and just for 2 days. The leaf and flower not change color or smell. Hopefully it works! i will spray that now every week. Update: Flower Day 20 I start with the Top dressing on all Plants. They start to frost. The powdery mildew spreads :'( i dont know what else i can do?! i spray again!
Likes
2
Share
En esta etapa no agregue ningún nutriente a la solución para evitar que la planta tenga gusto al nutriente, así dicen los expertos que queman esta hierba. Yo lo hago solo por deporte, no porque lo fume. mantuve el ph en condiciones estables a como dictan los científicos en este rubro. la próxima😁 semana corto las plantas y las pongo a secar.
Likes
10
Share
@Andres
Follow
I already imagine it with a lot of summer sun ... 100% recommended ... I will grow one of them again ....
Likes
14
Share
Aloha Freunde der Sonne 😊 Obwohl die Mädels immer noch kein Dünger bekommen haben, geht es Ihnen so gut wie noch nie. Sie fühlen sich mehr als wohl bei mir. Viel Spaß🙏
Likes
13
Share
Estava sem celular, perdi várias mídias da semana passada e dessa semana
Likes
40
Share
Week 25 - Frosty buds! Finally some time this weekend to defoliate! And look what I found: lots of frosty buds. The smell is delicious. Sweet lavender aromas, very warm. I like it a lot. Is this what she will taste like, too? Harvest is close.
Likes
108
Share
@Targona
Follow
Hello GrowDiaries friends. 72 days since my little girl sprouted from seed/harvest time🌱 Sweet Seeds breeder technical and general parameters: Red Pure Auto CBD 💚❤️💚❤️ Growing Red Pure Auto CB according to breeder: This “pure CBD” autoflowering strain is notable for its red flowers, very low THC levels (0.4–0.5%) and high CBD content (15–17%). It is a cross between two of our own strains: Sweet Pure CBD (SWS65) and Red Poison Auto (SWS39). It looks like most other indica plants with a large central bud, short side branches, a strong stem and plenty of resin. The strain offers a sweet, earthy aroma and taste, with shades of fresh pine or cypress and hints of fruits of the forest. It has a relaxing effect that washes away anxiety, which makes it ideal for medicinal users who do not want to feel any psychotropic effects from the THC 🌱🌿🌾 My experience: Throughout the growing period, the plant was very vital, it had a beautiful healthy color, strong stems. The color is beautiful, a loud purple color that extends to half of the leaves. Unfortunately, in the second week of flowering, it stopped and stopped getting stronger in the buds. They were beautifully colored, but they stopped getting thicker. Apparently, this will be my fertilizer testing and each strain and seed reacted completely differently. In the end, it had a very small harvest. I remember it like that maybe from my early days of growing. I'm very sorry about this strain, because I'm going to make a tincture from pure CBD. Fortunately, I grew two of these plants and only kept a diary for one. 💩💩 💚🌱 👍🌞 Data sheet of the strain Red Pure Auto CBD 💚❤️💚❤️ Indica: 58.4% Sativa: 40% Ruderalis: 1.6% THC: 0.4-0.5% CBD: 15-17% Ratio THC:CBD: (1:34-1:37) Indoor Yield: 450-500 g/m² Outdoor Yield: 30-100 g/plant Indoor/Outdoor Harvest: 9 weeks from germination Height: 50-90 cm Purple Flower: approximately 95% of the specimens Effects: Relaxing, Medicinal Taste: Cypress, Earthy, Pine tree, Cool, Fruits of the Forest, Sweet For growing I used: --------------------------------------- Growing tent Mammoth PRO+ 80: 80x80x180cm 1x circulation fan: 15W 🌬️ LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: duct fan - RAMTT100 🌬️ Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x Airpots 11 l I mix the substrate: Biobizz Lightmix + Perlite + Coco coir For sale here 👇👇👇👇👇👇👇👇: ⚡⚡⚡⚡⚡⚡https://sweetseeds.com/cs/semena-the-red-family/3063-red-pure-auto-cbd.html ⚡⚡⚡⚡⚡ Thanks for the likes :) See you soon 😍😍
Likes
9
Share
Big dense main colas, orange creamsicle terps, nice yield, covered in resin.
Likes
4
Share
Sigo com confinaca na colheita, as plantas estão respondendo muito bem .
Processing
Likes
72
Share
@DreamIT
Follow
🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 👤 2.2 ... 👤 3.2 Everything is going well, I like this lamp very much, it also seems to make plants bloom faster than the previous one. Super yeah !!! 👤 4.2 ... 👤 5.2 lumos maxima! 🤣🤣🤣 👤 6.2 👤 7.2 👤 8.2 ____________________________________________________ 👀Are you looking for a good lamp to start?👀 Viparspectra in my opinion has something more than the others, take a look at their site. ➡️ http://bit.ly/pro-seriesproductspro-series-p1500 ⏩Use " GDVIP " for an extra discount💯 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🐩👤Sirius Black👤🐩 by 🌍🌱WeedSeedsExpress🌱🌍 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 70% Indica / 30% Sativa 🎄 Genetics ▪️ Sirius Black 🚜Harvest ▪️ 450 g / m² 🌷Flowering ▪️ 63 - 70 days ✨THC ▪️ 25.0% ✅CBD ▪️ 0.5% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2020 ____________________________________________________________________________________ 👀📷 Follow the best photos on instagram 📷👀 https://www.instagram.com/dreamit420/ 🔻Leave a comment with your opinions if you pass by here🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
6
Share
@TyRun
Follow
Placing a dehumidifier or humidifier in the grow box turned out to be ineffective when both devices have their own automated settings. For instance, a humidifier set to 55% humidity works within a ±5% range, meaning it waits until the humidity drops below 50% to turn on and runs until it hits 60%. Since its sensor refreshes every 30 seconds, it might show 54% one moment and jump to 61% the next—not exactly stable at 55%. The dehumidifier behaves similarly. To achieve more consistent results, it’s better to rely on a hygrometer inside the grow box and use “dumb” devices that simply turn on when powered. Connecting these devices to smart outlets provides more precise control. For manual control, I maintained around 55% humidity by turning the humidifier and exhaust fan on and off via phone. Most moisture and aroma are released during the first three days, then taper off. The common rule of “when thin branches snap, it’s dry” led me to overdry my buds. A more reliable method is to monitor the hygrometer. When humidity stabilizes after the initial rise, wait one more day and then jar the buds. Rehydrating Overdried Buds: Overdried buds can be revived with a small piece of mandarin (or orange) peel, about 2.5x2.5 cm. Thoroughly wash the peel (even sanitize it if needed), cut a square, and place it on top of the buds in the jar. In my experience, this brought the humidity from 46% to 62% within 4 hours. Afterward, burp the jars for 15 minutes and monitor the hygrometer. If the humidity drops below 55%, return the peel for a few more hours. Once stable at 60-62%, remove the peel and continue curing, burping the jars twice daily for 15 minutes. As for humidity packs like Integra Boost or Boveda, I used them because I had some lying around. These packs are designed for 12 grams of product, so they don’t make a big difference in larger jars. If you burp jars daily and gently rotate the buds, they’re not really necessary. Trimming and Results: After 7 days of drying, I decided to trim dry this time. It turned out to be somewhat more convenient—everything gets covered in resin anyway, but the remaining leaves easily fall off, speeding up the process. I went for a tight trim, removing as much as possible. During the process, I felt disappointed seeing how little remained on the branches. The buds turned out airy and small, and I started cursing American genetics halfway through the trim. However, when it came to weighing, the results were surprisingly decent. Considering the buds' poor appearance, they’re not going to impress anyone visually, so it might have been easier to shred everything and use it for extraction. I don’t have extraction equipment, so I’ll make cannabutter from the trim, and the buds can rest in jars for now. Takeaways: Use a proper hygrometer for humidity control, not built-in sensors on humidifiers or dehumidifiers. Overdried buds can be easily rehydrated with citrus peel. Daily burping and rotation are sufficient for curing without humidity packs. Dry trimming can be faster and more convenient but may highlight issues with bud density. Despite underwhelming appearance, high resin content makes the strain great for extraction.
Likes
8
Share
Frosty !! And Dark ! Going to def regrow under stronger lights
Likes
4
Share
Just watch video and have fun! And I want to have my own marijuana farm~ My youtube channel: https://www.youtube.com/@VPNuseryoooo
Processing
Likes
68
Share
hello some news on the flowering day 14. we have to wait another 41 days of flowering approximately. I do not change my fertilizer dosages this week. Next week more BB. 😀👍
Likes
10
Share
@barlobruz
Follow
08/09/2021 - Beginning of week 3 flowering, noticing buds forming at almost every node I left from defoliating branches. 08/11/2021 - Watered with molasses
Likes
4
Share
@Sadom
Follow
15.08.: Die zweite Blütewoche hat begonnen und beide Pflanzen haben sich seit der Umstellung gut entwickelt. Da ich vermute, dass die G41 noch weiter wachsen wird, habe ich ein zweites Netz zur späteren Stabilisierung installiert. Das zweite Netz hängt jetzt auf einer Höhe von 1,30m, sodass die oberen Spitzen der G41 bereits durchgucken. Damit die Pflanzen ihre Energie auf die wichtigen Bereiche konzentriert, habe ich bei beiden Pflanzen ein Lollipopping durchgeführt. Dabei hab ich alle Blätter, Seitentriebe und Blütenansätze unterhalb des ersten Netzes entfernt. Diese Blütenansätze liegen so weit unten, dass hier kaum Licht ankommt und sie am Ende stark unterentwickelt sein werden. Idealerweise hätte ich damit noch ein wenig gewartet, aber da ich die kommenden 9 Tage im Urlaub bin wollte ich es vorher noch erledigt haben, das gleiche gilt für das Netz. Updates werden in der Zeit auch eher schwierig, aber vielleicht bekomme ich ein paar Fotos zugeschickt. 18.08.: Ich habe Fotos zugeschickt bekommen. Anscheinend steckt die G41 immer noch in ihrer Stretchphase, da sie das 2. Netz auch schon ein gutes Stück überwachsen hat. 20.08.: Heute kamen nochmal ein kleines Video und ein Foto von der G41. Der Wachstum wird langsam weniger und man sieht, dass sich der Stretch dem Ende neigt. Am Ende der 2. Blütewoche hat die G41 die PBB in Sachen Höhe komplett abgehängt. So wie ich vermutet hab, war der Stretch von der PBB nicht mehr allzu dolle, sodass sie wesentlich kleiner als die G41 geblieben ist. Das ist eins der Probleme, wenn man kein Monocrop anbaut. Außerdem ist der Wasserbedarf der Pflanzen gesunken, sodass die Bewässerung aktuell 10min läuft, wenn das Licht angeht. Nächste Woche bin ich wieder zuhause, dann überlege ich mir, wie ich das Problem löse, entweder mit einer Zusatzbeleuchtung, einem 3. Netz mit dem ich die G41 noch etwas runterbiege oder beides. Da mein Mitbewohner heute vor Beginn von Blütewoche 3 ebenfalls wegfährt, hat er mir gestern noch die aktuellen Daten der Pflanzen zugeschickt. Daher passt es nicht ganz mit dem Diary, ich denke aber, dass es der beste Kompromiss ist.
Likes
11
Share
So I didn't give her the ideal growth conditions to shine but I am very pleased with how she looks and smells. I did grow two of these cake bomb seeds the other being in a 3 gal fabric pot which turned out to be a beautiful male that i did not keep for lack of space purposes. I kept this plant however in a 2 gal clay pot during its entire 6 month life cycle that included roughly almost 4 months of veg followed by 70 days flowering time majority of her life was being cramped in a 3x3 with 6 other plants back when i only had 3 tents. And I wanted to cut her down a few days sooner but my drying tent was behind schedule. A few of my plants were effected by spider mights due to a clone that i had brought home and did not properly Quarantine. I was however very fortunate and lucky to eradicate the problem once and for all 5 weeks after noticing. With weekly ipm treatments of Organisheild (killed mights before flipping to flower with foliar sprays in-between to wash away any contaminates. so now that we have that out the way. But cake mlbomb actually fought the infestation off within 2-3 weeks This plant is very easy to train and responds extremely well without hesitation. Seeing as how thick the colas were for her small stature i would recommend a Scrog style training.Usually seeing tops turned up within a few hours. Stacking is very solid and tight all the way through. No visible stem structure on most tops even lower buds are round dense balls. I did not do any cold flush on this plants night temps did drop to 66-67°f on few occasions and she has a very visible and vibrant purple tone to her buds and leaves a very beautiful hue of royal purple a deep forrest green bud (taking more visual notes when final cure has finished) around day 18 of flower I was noticing trichome resin surfacing and by day 27 tops were full of white pistols and and frost covered definitely indicating the power punch she would soon deliver. Scents that began to develop were of cream and pound cake like aroma which than later developed into a jelly flavored gummy bear when trimmed before being cut to dry. More updates posted after curing has been complete
Likes
21
Share
This was the first time using the LED panels, they have much better canopy penetration than HID. I started at 12 inches, the leaves showed signs of light stress. The lights were moved back 6-8". Fan leaf growth rate is averaging 1/4" a day. 18"H x 6"W.