DAY 27, most of the plants are flowering, LST works so well. I'm worried because some of them seems to have advance, I don't think the buds should be that big for their age, maybe the heat stress made them flowering faster ? Moreover, some plants have their lower leaves turning yellow, I don't know what it is, give them nutrients once every 2 watering and I'm being very light with the amount of nutrients. Ordered 2 cooltubes, one for each light, it will help to cool down the room, gotta pick them up at the store and use them today. DAY 33, I followed your advices guys and added a bit of each nutrients for their deficiencies, don't know exactly if it was Ca, Mg or N deficiency but I can tell how better they are ! Water pH between 6,2 and 6,5 with 3acid down, hygro 55%. Because of the lower hygro for flowering stage, temp is going higher, I'll try my best to take care of them because another heat wave is coming... Thinking about reducing the light time to 12/12

3 bpp been in dark period for 3 days last week to try and push out bit more resin and thc , heard it can slightly increase both by stressing the plant of light in final stage before chop. So she is all Flushed, chopped and drying this week 👌😎🔥🔥🔥 Finally 2 more on Overdrive 2ml pl and next onto the flushing. Had to tie 1 plant to the tent because of the weight of colas. The plant literally looked like it was on drugs doing a full curve lol and about to snap! Will be flushing this week Other big bpp in 7 gallon is still going mad! Hench nuggies and smells amazing! 🙌 Waiting now for the leaves to turn yellow and then we're into flushing stage ....for a second time. Update 29/01/25 Drying tent has been at around 65-68 humidity and 20degrees I've taken most big leaves of now and left buds covered abit with small leaves for abit of protection and slow the drying down abit. Aiming for 7-10 days slow as possible for best results and retain the weight! So tempted to try one now but it Will ruin it Not long now 💨💨💨

Humidity has been the biggest struggle. The dehumidifier I bought was complete useless only moved RH 1% down. Tried a couple different things to try to combat the excessively high RH (75+%) openings up extra flaps in the tent didn’t work so I decided to turn on my carbon Filter fan. Which seems to be maintaining it at 55%, however prior to me being able to start my fan I had to clear the water out of my exhaust ducting. It had accumulated at least 1/4 gal of water, this to me was a clear indication of my humidity problem. Another thing I want to rant about is PH pens I haven’t been able to find a pen worth a damn and yes I have been properly handling them. My first one died on a watering day and I didn’t have a back up so I ordered two more off amazon which don’t seem to be working well either. I ended up doing it the old school way with the drops and shaking it in a tester. Oh I also gave nutrition a break past two feedings I had a slight burn on the tips will probably do one more plain water then put her back on nutrition. Went back to nutrition early then I intend due to a slight nitrogen deficiency I don’t thing it’s gonna be a big issue just gonna continue to monitor.

quite plan 🤐🤗

bla bla bla bla

Der erste Outdoor Run wird mit dem Frühling eingeläutet💪🏻 Hoffentlich spielt das Wetter mit und lässt die Ladys gut wachsen. 3 von 4 Samen sind gekeimt. Der zweite StrawberryBanana der nicht gekeimt ist, wurde jetzt nochmal in ein Glas mit Wasser. Wenn der Samen nach 24h immernoch nicht keimt, kommt er weg. Aber diese Chance soll er noch bekommen💪🏻🍀. Die GorillaAuto ist auch noch nicht ganz übern Berg, ich bin aber guter Dinge. Als Ersatz für die StrawberryBanana wurde eine LemonCherryCookies nachgelegt. Drücken wir ihr die Daumen. Die wird dann ein eigene Story bekommen. Die Ladys werden die ersten ca 2 Wochen in relativ kontrollierter Umgebung angezogen. Wenn es in die Endtöpfe geht, geht es für die Ladys nach draußen. Erst etwas im Sonne/Schatten Mix und wenn sie sich dann an die Sonne gewöhnt haben, sollen sie möglichst viel Sonne bekommen und werden minimal verstellt. Zwischen 3 und 4 Tagen nach dem Setzen der Samen haben die Ladys das Licht der Welt erblickt. Möge die erste Woche beginnen🍀💪🏻

Just finished week 11, and the time has come! Two of the three ladies were harvested on Monday of this week, the last one is still holding on. Posted some pictures of my homemade odor controlled dry box, the thing works great! Hardly any odors escape when the box is closed up, running a humidifier and drying in the basement has given me a solid 55-65% RH and a comfortable 64-70 degrees fahrenheit for a beautiful slow dry. Once the last one is harvested I will Get her hung up and have updated posts And pictures on harvesting/drying and a final end product. Stay tuned!

.

week intel: its time to harvest some of plants the ones that is mature enough. indica dominant plants will done first always so we should harvest them first because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. indica dominant plants will get done 1 or 2 weeks sooner than sativa dominant plants that will often takes more than 8 weeks so be aware to harvest them sooner. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

Before and after the defoil!! Slow flush with water only, cleaning them veg nutrients away! Net down to manage the stretch in next 3 weeks 🤞 first time using this tech, I usually just topt like a radical!!

The Mandarin Squeeze sisters are growing good. They got a solution change today. The colas are bulking and getting a lot of frost on and around them. She has not started smelling strong yet. That is comming I am sure. Everything is looking really good. Nothing more to report at the moment. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Esta semana le hize 1 riego con flawles finish de advanced y nada mas ahora solo agua hasta el corte muy feliz con estos resultados que temperatura y humedad me recomiendan para secar? Gracias a todos

Super easygoing strain, and fun to grow. Looks like a nice yield but I'll have to update with weight after it's dry. This sweetie was grown in 6 gallons, from seed, under non adjustable lighting from seedling through harvest. Base nutes and cal mag. Ocean Forest/perlite in the bottom 3/4, Happy Frog/perlite on the top 1/4. Trained with a combo of scrog/lst techniques. The lights are two 50 dollar "1000 watt equivalent" Amazon LEDs, they say their max input is 280 volts though so I have no idea what grams to watts will be when the dry weight comes in. Thanks to everyone who checked or checks this diary out, that's pretty cool of you! I'll be back in a bit to update weight and smoke, happy trails!

👨‍🚀👋 This week I start cutting a few lower branches from each plant. This way more energy should be available for the upper branches. For this culture, I would like to let each plant grow with a main bud without "topping". I would like the tent to be filled and look like a Sog in flowering. (a total of 16 plants with 5 strains in this culture) My goal: at least 300g of dry buds🤞 ------------------------------------------------------------ 💧Watering each pot: Day 15 : 0.75 L With a little Bio enhancer ( 0.8grams/L) Day 21 : 0.75 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ Thank you for your visit, it's always nice to see you!💚😀 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/

The super skunk has been giving a dry out and flush. She will need another dry out and flush before I return to her feeding. There’s signs of recovery as the roughly brittle leaves are returning back to soft and smooth. The leaves are yellow and the stem and lateral branches are red bull are restoring back to pale green. Close monitoring will continue until she gets back to good health. She has grown 4cm this week standing at 38cm tall

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Poda apical hecha y brotes y hojas que no pintan na, fuera, a crecer 4 brotes con fuerza, que de estos sacaremos 8 y así sucesivamente. Esto de momento a la que nacio y arrancó sana, a la otra aún no, vamos a dejar que recupere un poco que está llendo muuy bien y con carrerilla. En sí ambas están creciendo muy bien. Seguramente la semana que viene le haga apical a la chunga que se está recuperando super bien. Edito domingo 22/02: cambio de armario, de luces y de maceta. El armario es la leche, se nota la calidad joder jajajajajaja es de la marca Vevor, poco conocida de momento... Pero dadle tiempo, uso también su extractor y de verdad que funciona de lujo y muy silencioso. Las luces las tengo a 300W ya que es lo minimo pero bastante alejadas, a unos 40/50 cm. Les llega una media de 11,12k de ppfd. Y lo dicho, trasplantadas a maceta todas.

OG 4Q24 Flower Week 7 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Jan 22, 2024 CR2 4Q24 43:F:6:1] End of Week: [Tue Jan 28, 2024 CR2 4Q24 49:F:6:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ __ Wed Jan 22, 2025 OG 4Q24 43:F:6:1 - [x] R&R Each Drip Ring Assembly (Assure NO Fertigation/Bio Build up) Runoff - Amount: [ .5, l] - EC: [ 3.8, mS/cm] - EC∆: [ 1.2, mS/cm] # Danger! Refresh Res (Filtered, pH’d Tap Water) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 35, ml] - [x] SLF-100: [ 10, ml] __ Thu Jan 23, 2025 OG 4Q24 44:F:6:2 Refresh Res (Distilled Water, pH: 7, EC: 0.0) - [x] Amount: [ 2, gal] - [x] Primer A&B: [ 39, ml] - [x] SLF-100 Runoff - Amount: [ 1.2, gal] - EC: [ 4.3, mS/cm] - EC∆: [ 1.6, mS/cm] # DANGER __ Fri Jan 24, 2025 OG 4Q24 45:F:6:3 Runoff - Amount: [ 0.3, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER  __ Sat Jan 25, 2025 OG 4Q24 46:F:6:4 Dump Res - [x] Remove Chiller and Fertigation Pumps - [x] Dump and CLEAN Reservoir, Note Sediment - [x] Detach Main Feedline - [x] Clean Chiller Pump - [x] Clean Fertigation Pump - [x] Dry ALL Components - [x] REASSEMBLE When Dry - [x] Clean 1/2” Fertigation Mainline Watered In Primer A&B, CalMag Fuel, Silica Skin - Amount: [ 1.9, l] - EC: [ 2.7, mS/cm] Refresh Res w/ Full Hydro (Primer A&B, Silica Skin) - [x] Amount: [ 4, gal] - [x] EC: [ 2.7, mS/cm] - [x] Primer A & B: [ 73.1, ml] - [x] SLF-100: [ 40, ml] Runoff - Amount: [ 0.25, gal] - EC: [ 4.1, mS/cm] - EC∆: [ 1.4, mS/cm] # DANGER __ Sun Jan 26, 2025 OG 4Q24 47:F:6:5 Refresh Reservoir - 2 Gal, EC: 2.7 - [ ] Check, R&R Fertigation Manifold Filter as Needed - [x] SLF-100: [ 10, ml] - [x] Primer A & B: [ 40, ml] Runoff - Amount: [ 1.25, gal] - EC: [ 4.2, mS/cm] - EC∆: [ tbd, mS/cm] __ Mon Jan 27, 2025 OG 4Q24 48:F:6:6  Watered In Primer A&B, CalMag Fuel, Silica Skin - [x] Amount: [ 1.9, l] - [x] EC: [ 2.7, mS/cm] IPM - [x] Spray sides - cover Air holes of Airpot - [x] Spray tops of pots to drench - [x] Dr. Zymes, 28ml/quart @ 85°F - [x] APPLY Mosquito Bits to Top of Containers Runoff - [x] Amount: [ 1.5, gal] - [x] EC: [ 4.9., mS/cm] - [x] EC∆: [ 2.2, mS/cm] # *** Plants Should Be Fried! Need to R&R Pre-Filter again. Fan Flow significantly diminished. __ Tue Jan 28, 2025 OG 4Q24 49:F:6:7  Replace ACI Pre-Filter - [x] Remove Plants - [x] Disconnect Irrigation Emitters - [x] Remove and Rinse Drain Tray - [x] Drop Front of Light - [x] Remove & Replace Pre-Filter - [x] Verify Airflow (Make sure we don’t need to change the carbon in the filter) - [x] Raise front of light to run position - [x] Replace Drain Tray - Reposition Shims - [x] Replace Plants AS THEY WERE - [x] Replace Emitters - [x] Verify Irrigation Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 4.8, mS/cm] - [x] EC∆: [ 2.6, mS/cm] # *** Plants Should Be Fried!

Flowering described earlier than I expected, more than 1 week after the vegetation phase would be bigger and more beautiful, has an effect with pleasant sensations and euphoric as the sativa dominant is accustomed to the aroma of lemon and citrus.