(germination through first week of seedling 11/29-12/10) Days 1 to 7 Starting a new grow with two Royal Queen, Purple Queen Seeds (thank you Royal Queen for making this possible) I plan to be rough with these plants and top them both to 8 colas. This journal will be different than my last (alot less detail) but I will still look for new opportunities to learn something new that I can share. I also plan to take at least 5 pics per week with 1 video and 1 'pretty' cover pic per week, however I also plan to delete the excess details at the end of each week. I had these seeds for about 4 months now. They have been stored in the fridge inside a paper bag. I took the seeds out of the fridge and let the rest on the counter for two days before dropping them in water. After a seed inspection of which I noticed some unatural bumps on the shell of one, but no cracks or splits, I dropped them both in purified water for 19 hours. Since the shells still hadn't cracked, I then transferred both seeds to paper towels with the belly button side up and pressed them against the glas side to make the tap root grow straight down. These seeds took 2 days to show a crack in the shell from the time that I placed them into the paper towel - Once they cracked, I cut the middle of Rapid Rooter starter pods and placed the tap root down inside the pods. I then closed the pods with ends of toothpicks and placed them in an incubator until they showed a tap root growing out from the bottom of the pods. That took a total of 4 days from paper towel to transplant day (now called Day 1) where they were about 1 to 1.5 inches above the soil line after I planted them in 1 cup pots. Dynomyco Mycorrhizal Inoculant was already mixed into the ph balanced soil that had been growing Happy Frog mycorrhizae for about a month. I used 8.75ph purified water with the soil to create a soil with 6.3ph (this soil has been notorious for being extremely low on ph and by week 4 to 5 after second topping the first fan leaves show a calcium deficit.)

Just two more days in the dark, then it’s chop time! This run I’m testing out my DIY dry box — got a fan rigged up for airflow, should do the trick. Final harvest update dropping in like two weeks… fingers crossed for some sticky fire! Stay tuned, it’s about to get frosty!

Girls are looking good, though they could have been much larger by this time. I wish I gave them more light and more nuts in the previous weeks. Well, they will have to spend more time in veg. They got topped this week, at the 6th node, and I will do it once more before flipping them, so in total there will be 10 lower branches + 4 tops. I also started misting with CalMag just in case.

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I did a heavy defoliation with the green crack for the first time.. the first 3 pics are pre- and the last 3 pics are post-defoliation. Definitely better air flow now as well as more "tops" being seen. Tomorrow going to do the durban.. update w more pics then.

Me hubiera gustado tener un cultivo mas regular, pero al menos una de ellas me dio una muy generosa cosecha. Espero si o si poder plantarla en otra oportunidad.

Wed 01/12 - 5th nodes started to come through now, once the 6th node has hit roughly 5-10mm in height i'll be topping down to 5 nodes again! (SCRoG going up on saturday followed by LST and light defoliation) - Cal-Mag deficiency has cleared up! Sat 04/12 - Topped all Plants, 7th nodes had started but chopped the 6th off back down to 5 nodes on all plants. - Very Slight yellow tips so will Cal Mag Foliar spray 30 mins before lights off. - SCRoG set at 21cm above the medium *note* one plant is now drinking double compared to the rest, most plants taking 1.25L feed every day, this one takes 2-2.5L daily! Mon 06/12 - Took off the lowest fan leaves from every plant as they're just sat in darkness doing nothing - Week 4 I will begin LST and Heavy Defoliate/Lolli-popping - Just ordered some LST Clips so they will be arriving tomorrow.

Bonjour à tous les padawans et maîtres jedis Comme vous pouvez le voir sur les photos la plante est magnifique sans carence et commence sa sénescence Le rinçage est fini et les trichomes sont ambrés à hauteur de 30% je lasse donc le substrat bien sec pour effectuer la récolte pour le jour 79 Cette culture touche donc à sa fin et le plaisir aussi. Je suis curieux et me languis de savoir le poid net de cette plante je pense que cela dépassera les 30 grammes À bientôt

Que pasa familia, vamos con la cuarta semana de floración de estas FBA2506 de FastBuds. De las 5 plantas, retiré una y me quede con 4 , preselección. La tierra que utilizamos que está en la publicación anterior es top crop all mix, Por supuesto el ph se mide en cada riego y se mantiene en 6.2, regando cada 48 horas e intentando mantener la humedad en torno al 50 %. Las flores ya están progresando y están cogiendo las 4 un tono morado bastante curioso. Un ejemplar sigue un poco sobrefertilizado, es la única con la que me corto para alimentar. Las próximas semanas vamos viendo cómo florecen y avanzan. Hasta aquí todo, Buenos humos 💨💨💨

This girl is growing gorgeous and super frosty, hints of blue/purple are starting to show deep in the buds. she doesn’t seem close to finished pushing out new pistils, i would say she has at least 3 weeks left. i am switching to only water at this point, so that she starts to utilize the last of the nutes in her soil

26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️

Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - LETS CHOP IT ✂️✂️✂️ - beautiful big bud structure - smelling amazing - last trichome check again after 48hrs Darkness - looking perfect!! - Now lets dry inside the tent for 12-14 Days - Trimjail soon Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain --- 🏷️ OG KUSH by Barney's Farm https://www.barneysfarm.com/og-kush-646 ---💡 Lighting --- 💡LUMATEK ZEUS PRO 600 https://lumatek-lighting.com/zeus-600w-pro-29/ --- 🥗 Nutrients and Feeding * 🍸 PLAGRON Algae Baseline grow/bloom + Additives: Power Roots, Sugar Royal, Pure Enzym, Silic Rock, Power Buds, Green Sensation * 📅💪 baseline grow/bloow: 4ml/l & additives: 1ml/l each https://plagron.com/de/hobby/produkte --- 🏭 Grow Setup --- * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) & Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! don't forget to check out my Instagram: budboutiquee <3 - Bud Boutique

Planted them into 20L hydroponic pots. Diy hydroponic system. Very easy to do and save money. Topped them so the lower branches can keep up with higeher ones. Defoliated lower ones. They didnt get any light. Planning to keep them for two weeks in this water. Advanced nutrients recommend one week but lets see.

Just watering and waiting...🤤 How many days do you think?? Please lmk

Hello. This is the end of week 10 of flowering... and it's harvest time. Just shot some quick video's to show what they look like after flushing. Should take around 4 or 5 days to harvest all 13 plants. With the weighing of the raw branches before wet trimming them and writing down the weight, And the taking of the photo's, making them look good, it takes a little longer to harvest doing a diary. OK. See you in a couple of weeks. Chuck.

Used bud clips to spread the branches out after topping to the 4th node. Doing well and super vigorous. Did some minor defoliation and set up a blumat this week.

Trying to get 70% RH but they are so small and don´t transpire so much, plus the indoor is quite large for this babies and I don´t have a humidifier. Just have to spray them a bit all the time to make them feel humid enough. RH is actually 60% but that´s OK, it will increase eventually when this babies grow. Today May 16 I got a little humidifier and that mantains humidity around 60% without spraying water. I still spray a little water during the day to make them feel more comfy. I also decided to switch some light bulbs off because it was too much light for this babies. Just let 3 white bulbs and the 2 full spectrum bulbs on, 60 cm above the babies. That was it for the first week of this 3 gums. Gum 3 has already a name if you noticed, I'll be thinking of the names for the other girls.

I have to dry the buds in the dark at 20 degrees with 50% humidity

30/11: Off with their heads! on Day 15, i deemed both of them worthy of topping. Lets see how they take it! Watered them with 1L beforehand, 4ml/L rootjuice, 2ml/L Grow and activera, and 0,4g/L of microbes. 4/12: Training time! Stakes are in, canopy looks nice and even (enough) for me! Probably watering tomorrow on the 5th as the soil is still a bit too damp and the pots still a bit too heavy for my liking. Grow rate has drastically increased, they look nice and green, and topping hasnt stunted them. Cant wait for the coming weeks! 6/12: its the 6th now and i havent watered yet! overdone it on the 30/11 maybe. Oh well! theyre doing reasonably fine. Added timelapse. See you next week!

Week 4 of flower just started, Everything is under control, I gradually remove bigger fan leaves as I want as much light on buds as possible, I’ve added small led at the pot level shining upwards on all the popcorn buds, just testing this idea. Any one tried that before ? I’ve decided to transplant all the plants in veg into final 11l pots, 2 smartpots and 3 airpots (no point for bigger pots since they are clones and don’t develop big roots), Another 4 weeks on veg, flip on cfl and then I’ll be moving them straight under 12/12 cmh In a week I’ll be sprouting new seeds from RQS - Kush - Medical mass - AK47 - Cheese Hopping for baby gorilla to spread her wings quicker, she is very shy ☺️ Have a nice weekend folks